Author Index

A

  • Abbasi, H. New Correlations for the Prediction of Terminal Velocity and Drag Coefficient of a Bubble Rising [Volume 22, Issue 2, 2021, Pages 71-87]
  • Abbasi, Hossein Comparative study of ultrasonic vibrations assisted EDM and magnetic field assisted EDM processes [Volume 21, Issue 1, 2020, Pages 45-64]
  • Abbasi, M. Finite Element Analysis of Functionally Graded‎ ‎Piezoelectric Beams [Volume 11, Issue 1, 2010, Pages 45-73]
  • Abdelfattah, Osama Influence of Biodiesel from Egyptian Used Cooking Oils on Performance and Emissions of Diesel Engine [Volume 18, Issue 1, 2017, Pages 65-80]
  • Abiri, A. New Correlations for the Prediction of Terminal Velocity and Drag Coefficient of a Bubble Rising [Volume 22, Issue 2, 2021, Pages 71-87]
  • Abolbashari, M.H. Vibrational Analysis of Cables Using the Non Standard Finite Difference Method [Volume 22, Issue 1, 2021, Pages 74-89]
  • Acheampong, Juliet Tensile properties and fatigue behavior of AHSS-DP 350/600 subjected to laser shock processing [Volume 20, Issue 2, 2019, Pages 74-86]
  • Afshar, Mahmoud A Novel Straightforward Practice for Rotameter Calibration in Gas Flow Measurement [Volume 24, Issue 1, 2023, Pages 6-14]
  • Afshari, D. Investigation of welding parameters effects on residual stresses of resistance spot welding of AZ31 alloy [Volume 22, Issue 1, 2021, Pages 27-41]
  • Afshari, E. Thermo-economic performance of an indirect hybrid system of solid oxide fuel cell and micro gas turbine [Volume 22, Issue 1, 2021, Pages 5-26]
  • Afzalpour, Narges Wheelchair stabilization by the control of a spatial 3-RRS mechanism [Volume 17, Issue 2, 2016, Pages 84-100]
  • Aghaei, A.R. Effect of Magnetic Field on Heat Transfer of Nanofluid with Variable Properties on the Inclined Enclosure [Volume 15, Issue 1, 2014, Pages 28-38]
  • Ahangari Sisi, Zahra Time Delay Estimation and PID Controller Design using Smith Predictor for Lever Arm Platform [Volume 24, Issue 2, 2023, Pages 142-156]
  • Ahmadi, Behzad Thermo-economic analysis of absorption chiller integrated with a GE-F5 gas turbine for power enhancement (Zanbagh power plant, studied case) [Volume 19, Issue 1, 2018, Pages 20-33]
  • Ahmadi Boyaghchi, F. Assessment of a Real Combined Cycle Power Plant with Supplementary Firing Based on Advanced Exergy/Exergoeconomic Methods [Volume 15, Issue 2, 2014, Pages 28-58]
  • Ahrar, A. J. Influence Of Coiled Wire Presence On The Convective Heat Transfer Coefficients In R-600 Condensers [Volume 22, Issue 1, 2021, Pages 42-53]
  • Akbari, Afzal Transient Response of a Functionally Graded Piezoelectric Rectangular Plane with Multiple Cracks under Electromechanical Impacts [Volume 24, Issue 1, 2023, Pages 40-69]
  • Akbari Alashti, R. Linear Thermoplastic Analysis of FGM Rotating Discs with Variable Thickness [Volume 14, Issue 2, 2013, Pages 73-87]
  • Akbari Alashti, R. Thermo-elastic analysis of a functionally graded thick sphere by differential quadrature method [Volume 12, Issue 2, 2011, Pages 27-43]
  • Akbarshahi, H. Analytical Modeling of Axial Collapse of Circular Hybrid Tubes [Volume 12, Issue 2, 2011, Pages 44-53]
  • Alam-Hakkakan, Hosein Ali Investigating the Influence of Piezoelectric Excitation on the Veering Phenomenon Associated with Electrostatically Coupled Micro-beams [Volume 24, Issue 2, 2023, Pages 60-80]
  • Alaribe, Kenneth O Analysis of squeezing flow of viscous fluid under the influence of slip and magnetic field: comparative studies of different approximate analytical methods [Volume 20, Issue 2, 2019, Pages 5-27]
  • Alasty, A. Variable Structure Behavioural Controller for Multi-agent Systems [Volume 10, Issue 2, 2009, Pages 49-63]
  • Alimardani, F. Modeling and Intelligent Control System Design for Overtaking Maneuver in Autonomous Vehicles [Volume 13, Issue 1, 2012, Pages 68-87]
  • Alipour, A. Numerical Simulation of Beta Type Stirling Engine Considering Heat and Power Losses [Volume 15, Issue 2, 2014, Pages 5-27]
  • Alipour, M. M. An Analytical Shear Factor for FGM Circular Plates with Non-uniform Elastic Foundations and Normal and Shear Tractions [Volume 14, Issue 2, 2013, Pages 50-72]
  • Alipour, M. M. A Differential Transform Approach for Modal Analysis of Variable Thickness Two-directional FGM Circular Plates on Elastic Foundations [Volume 11, Issue 2, 2010, Pages 15-38]
  • Alipour, M. Non-Equilibruim Molecular Dynamics Simulation of Poiseuille Flow in a Nanochannel [Volume 11, Issue 1, 2010, Pages 21-33]
  • Alizadeh, M. Linear Thermoplastic Analysis of FGM Rotating Discs with Variable Thickness [Volume 14, Issue 2, 2013, Pages 73-87]
  • Alizadeh Attar, Alireza A Novel Straightforward Practice for Rotameter Calibration in Gas Flow Measurement [Volume 24, Issue 1, 2023, Pages 6-14]
  • Alizadeh Attar, Mehdi A Novel Straightforward Practice for Rotameter Calibration in Gas Flow Measurement [Volume 24, Issue 1, 2023, Pages 6-14]
  • Allam, Sabry Influence of Biodiesel from Egyptian Used Cooking Oils on Performance and Emissions of Diesel Engine [Volume 18, Issue 1, 2017, Pages 65-80]
  • Aminfar, H. Eulerian simulation of bubble columns reactors and effect of various parameters on the gas holdup [Volume 13, Issue 1, 2012, Pages 52-67]
  • Aminfar, H. Modeling of Upward Subcooled Flow Boiling of Refrigerant-113 in a Vertical Annulus [Volume 12, Issue 1, 2011, Pages 19-40]
  • Aminfar, H. Experimental Study on the Effect of Magnetic Field on Critical Heat Flux of Ferrofluid Flow Boiling in a Vertical Tube [Volume 19, Issue 2, 2018, Pages 116-126]
  • Aminy, Mohammad Thermo-economic analysis of absorption chiller integrated with a GE-F5 gas turbine for power enhancement (Zanbagh power plant, studied case) [Volume 19, Issue 1, 2018, Pages 20-33]
  • Amirkhani, Saeed Model-based Approach for Multi-sensor Fault Identification in Power Plant Gas Turbines [Volume 21, Issue 1, 2020, Pages 65-86]
  • Amoah, Martin Tensile properties and fatigue behavior of AHSS-DP 350/600 subjected to laser shock processing [Volume 20, Issue 2, 2019, Pages 74-86]
  • Amrollahipour, R. Experimental Study on the Magnetomechanical Characteristics of Ni-Mn-Ga Ferromagnetic Shape Memory Alloy Single Crystals [Volume 14, Issue 1, 2013, Pages 72-84]
  • Anbumani, K. A Comparative Study on the use of Butyl Esters of Soyabean and Sunflower Oils as Biodiesel Fuel for Compression Ignition Engine [Volume 12, Issue 1, 2011, Pages 68-85]
  • Arabi, Seyed Mehdi Thermo-economic analysis of absorption chiller integrated with a GE-F5 gas turbine for power enhancement (Zanbagh power plant, studied case) [Volume 19, Issue 1, 2018, Pages 20-33]
  • Arabkoohsar, A. Proposing a Novel Configuration for CGSs Aimed at Reducing Energy Consumption and Exergy Destruction [Volume 15, Issue 1, 2014, Pages 5-27]
  • Arabkoohsar, A. Fuel Consumption Minimization in Greenhouses by Employing an Innovative System Taking Advantage of Solar and Geothermal Energies [Volume 15, Issue 2, 2014, Pages 91-115]
  • Arabkoohsar, Ahmad Dynamic Modelling of a Compressed Air Energy Storage System in a Grid Connected Photovoltaic Plant [Volume 16, Issue 1, 2015, Pages 29-51]
  • Arbab Tafti, M.R. Model Predictive Control System Design using ARMAX Identification Method for Car-following Behavior [Volume 14, Issue 1, 2013, Pages 48-71]
  • Arghavani, J. A fiber-reinforced Transversely Isotropic Constitutive Model for Liver Tissue [Volume 14, Issue 2, 2013, Pages 88-97]
  • Armin, A. Finite Element Analysis of Functionally Graded‎ ‎Piezoelectric Beams [Volume 11, Issue 1, 2010, Pages 45-73]
  • Arteshyar, Koosha Free vibration analysis of thin annular plates integrated with piezoelectric layers using differential quadrature method [Volume 20, Issue 1, 2019, Pages 71-93]
  • Asemi, Kamran Buckling and static analyses of functionally graded saturated porous thick beam resting on elastic foundation based on higher order beam theory [Volume 20, Issue 1, 2019, Pages 94-112]
  • Asgari, G. R. A generalized upper bound solution for bimetallic rod extrusion through arbitrarily curved dies [Volume 13, Issue 1, 2012, Pages 23-35]
  • Askari, Amir Reza Investigating the Influence of Piezoelectric Excitation on the Veering Phenomenon Associated with Electrostatically Coupled Micro-beams [Volume 24, Issue 2, 2023, Pages 60-80]
  • Ayatollahi, M. Multiple Moving Cracks in a Nonhomogeneous Orthotropic Strip [Volume 14, Issue 1, 2013, Pages 17-32]
  • Ayatollahi, M. Mixed Mode Fracture Analysis of Multiple Interface Cracks [Volume 15, Issue 2, 2014, Pages 78-90]
  • Ayatollahi, Mojtaba Multiple cracks in an elastic half-plane subjected to thermo-mechanical loading [Volume 17, Issue 2, 2016, Pages 19-45]
  • Ayatollahi, Mojtaba Transient Response of a Functionally Graded Piezoelectric Rectangular Plane with Multiple Cracks under Electromechanical Impacts [Volume 24, Issue 1, 2023, Pages 40-69]
  • Azizi, T. Assessment of a Real Combined Cycle Power Plant with Supplementary Firing Based on Advanced Exergy/Exergoeconomic Methods [Volume 15, Issue 2, 2014, Pages 28-58]

B

  • Babaei, Masoud Buckling and static analyses of functionally graded saturated porous thick beam resting on elastic foundation based on higher order beam theory [Volume 20, Issue 1, 2019, Pages 94-112]
  • Badri, M. A. Using Weibull probability distribution to calibrate prevailing wind applying in oil spill simulation [Volume 13, Issue 1, 2012, Pages 5-22]
  • Bagheri, R. Multiple Moving Cracks in a Nonhomogeneous Orthotropic Strip [Volume 14, Issue 1, 2013, Pages 17-32]
  • Bagheri, R. Mixed Mode Fracture Analysis of Multiple Interface Cracks [Volume 15, Issue 2, 2014, Pages 78-90]
  • Bagheri, Rasul Transient Response of a Functionally Graded Piezoelectric Rectangular Plane with Multiple Cracks under Electromechanical Impacts [Volume 24, Issue 1, 2023, Pages 40-69]
  • Bagherinejad, Navid A Novel Straightforward Practice for Rotameter Calibration in Gas Flow Measurement [Volume 24, Issue 1, 2023, Pages 6-14]
  • Bahrainian, Seyed Saied The Effect of Repeated Impact Loading on Reservoir Rock Properties [Volume 21, Issue 2, 2020]
  • Bahrami, M Nonlinear Non-minimum Phase Flight Vehicle Control Using Dynamic Sliding Manifold [Volume 9, Issue 2, 2020, Pages 42-58]
  • Bahtui, A. Thermoelastic Analysis in Thick FGM Cylinders with Extended Profile [Volume 12, Issue 2, 2011, Pages 73-91]
  • Baidoo, Philip Tensile properties and fatigue behavior of AHSS-DP 350/600 subjected to laser shock processing [Volume 20, Issue 2, 2019, Pages 74-86]
  • Bakhsheshy, Ali Effect of temperature on free vibration of functionally graded microbeams [Volume 19, Issue 1, 2018, Pages 5-19]
  • Bakkhoshnevis, Abdolamir Experimental investigation for wake of the circular cylinder by attaching different number of tripping wires [Volume 17, Issue 1, 2016, Pages 5-25]
  • Bakkhoshnevis, Abdolamir Experimental Investigation of wake on an elliptic cylinder in the presence of tripping wire [Volume 18, Issue 1, 2017, Pages 81-102]
  • Bak Khoshnevis, A. Experimental Investigation of the Flow Structure around a Pitching Airfoil by Mean and Instantaneous Data [Volume 23, Issue 2, 2022, Pages 5-32]
  • Bandyopadhyay, Asish Parametric optimization of cylindrical grinding process through hybrid Taguchi method and RSM approach using genetic algorithm [Volume 19, Issue 1, 2018, Pages 34-62]
  • Barati, F. Calculating Stress Intensity Factor for Small Edge Radial Cracks on an Orthotropic Thick-walled Cylinder Subjected to Internal Pressure using the Average Stress [Volume 14, Issue 2, 2013, Pages 98-109]
  • Basiri, M. Rapid Subsonic Flutter Analysis for Low Aspect Ratio Composite Wings [Volume 23, Issue 1, 2022, Pages 68-86]
  • Bastanfar, Marzieh Cracked piezoelectric layer bounded between two orthotropic half-planes [Volume 19, Issue 1, 2018, Pages 79-98]
  • Bateni, M. Coupled Thermoelasticity of FGM Truncated Conical Shells [Volume 22, Issue 1, 2021, Pages 127-142]
  • Bayati Nezhad, M.A Prediction of the Remaining useful Life of the Rolling Element Bearings using Recurrent Neural Network [Volume 21, Issue 2, 2020]
  • Behjat, B. Finite Element Analysis of Functionally Graded‎ ‎Piezoelectric Beams [Volume 11, Issue 1, 2010, Pages 45-73]
  • Behzad, E. A Hybrid Method for Prediction of Lean Blow Out in a Turbine Engine Combustion Chamber [Volume 22, Issue 2, 2021, Pages 54-70]
  • Bigdeloo, Fatemeh Stabilization of Intrusive DMD based Reduced Order Model of the Convection-Diffusion Equations [(Articles in Press)]
  • Boustani, Esmail The Exergy Optimization of a Flat-Plate Solar Collector Using AL2O3-Water, CuO-Water and TiO2-Water Nanofluids by Genetic Algorithm [Volume 17, Issue 2, 2016, Pages 5-18]
  • Boyaghchi, F. Ahmadi Thermodynamic Assessment and Parametric Study of a Supercritical Thermal Power Plant [Volume 13, Issue 2, 2012, Pages 59-80]

C

  • Chaibakhsh, Ali Model-based Approach for Multi-sensor Fault Identification in Power Plant Gas Turbines [Volume 21, Issue 1, 2020, Pages 65-86]
  • Chakerizade, A. Influence Of Coiled Wire Presence On The Convective Heat Transfer Coefficients In R-600 Condensers [Volume 22, Issue 1, 2021, Pages 42-53]
  • Cheloee Darabi, A. Linear Thermoplastic Analysis of FGM Rotating Discs with Variable Thickness [Volume 14, Issue 2, 2013, Pages 73-87]
  • Cheraghpour Samavati, F. Design and Implementation of a Control Device for Intelligent Wheelchair by Combining Image Processing and Acceleration Sensor [Volume 22, Issue 2, 2021, Pages 88-105]

D

  • Dadi, V. Emission Performance of a Diesel Engine Running on Biodiesel Fuel at Different Compression Ratios [Volume 15, Issue 1, 2014, Pages 82-98]
  • Damangir, E Effect of Volute and Rotor Widths on Squirrel Cage Fan Performance and Velocity Profiles [Volume 9, Issue 2, 2020, Pages 80-97]
  • Daneshmehr, A.R Three-Dimensional Elasticity Solution of Single Layer Piezoelectric Panel [Volume 9, Issue 2, 2020, Pages 26-40]
  • Davood Abadi, A Prediction of the Remaining useful Life of the Rolling Element Bearings using Recurrent Neural Network [Volume 21, Issue 2, 2020]
  • Davoodbeygi, Yegane Friction-Stir-Processing Effect on Fracture Toughness of Oil Pipelines in ST 37 Group Before/After Nano ZrO2-Coating [Volume 17, Issue 1, 2016, Pages 79-95]
  • Davoodi Yekta, Mohammadreza Multi-objective Optimization of Two-Layer Microbeam used for Sensing of Viruses by Genetic Algorithm [Volume 24, Issue 1, 2023, Pages 70-84]
  • Dehbani, H. An Exact Solution for Quasi-Static Poro-Thermoelasticity in Spherical Coordin [Volume 12, Issue 1, 2011, Pages 86-108]
  • Dehghan, Maziar Wind farm layout optimization using a Reynolds‐averaged Navier–Stokes model and a genetic algorithm [Volume 21, Issue 2, 2020]
  • Dehghan Niestanak, Vahid Design and Development of an Emergency BVM-based Ventilator with 2D Look-up Table Control Algorithm [Volume 24, Issue 2, 2023, Pages 42-59]
  • Dehkordi, A.H Effect of Volute and Rotor Widths on Squirrel Cage Fan Performance and Velocity Profiles [Volume 9, Issue 2, 2020, Pages 80-97]
  • Dolatabadi, N. A Linear Approach to the Control of Vortex Induced Vibrations of Circular Cylinders with a 2-D Van der Pol Model for Structural Oscillator [Volume 12, Issue 2, 2011, Pages 54-72]
  • Dorali, M.R. Mechanical Behaviour of Femoral Diaphyseal Cortical Bone using the Computed Tomography Data: A Numerical Investigation [Volume 22, Issue 2, 2021, Pages 5-20]
  • Doustdar, M. M. Parametric Study of Fuel Vapor Concentration Distribution Due to Vaporization of Fuel Droplets in Free Atmosphere [Volume 10, Issue 1, 2009, Pages 23-36]

E

  • Ebrahimi, B Nonlinear Non-minimum Phase Flight Vehicle Control Using Dynamic Sliding Manifold [Volume 9, Issue 2, 2020, Pages 42-58]
  • Ebrahimi, Reza Wind farm layout optimization using a Reynolds‐averaged Navier–Stokes model and a genetic algorithm [Volume 21, Issue 2, 2020]
  • Ebrahimi-Nejad Rafsanjani, S. Optimizing the Characteristics of the Motion of Steel Balls and their Impact on Shell Liners in SAG Mills [Volume 10, Issue 1, 2009, Pages 5-22]
  • Eghbali, Akbar Numerical Simulation of the Saline Water Electrolysis Process using Electromagnetic Waves [Volume 24, Issue 2, 2023, Pages 104-141]
  • Eghbalian, Hirad Dynamic Coupled Thermo-Viscoelasticity of a Spherical Hollow Domain [Volume 17, Issue 1, 2016, Pages 96-110]
  • Ehteram, H. R. Effect of Magnetic Field on Heat Transfer of Nanofluid with Variable Properties on the Inclined Enclosure [Volume 15, Issue 1, 2014, Pages 28-38]
  • Ehyaei, Javad Vibration analysis of a double layer microshell utilizing a modified couple stress theory [Volume 21, Issue 1, 2020, Pages 21-44]
  • Eliasi, H. Coupled Thermoelasticity of FGM Truncated Conical Shells [Volume 22, Issue 1, 2021, Pages 127-142]
  • Eliasi, Hossein Nonlinear Coupled Thermoelasticity of Functionally Graded Cylindrical Shells Resting on Elastic Foundation [Volume 24, Issue 2, 2023]
  • Eltawwab, Ali Influence of Biodiesel from Egyptian Used Cooking Oils on Performance and Emissions of Diesel Engine [Volume 18, Issue 1, 2017, Pages 65-80]
  • Eslami, M. R. Thermoelastic Analysis in Thick FGM Cylinders with Extended Profile [Volume 12, Issue 2, 2011, Pages 73-91]
  • Eslami, M. R. Thermomechanical Buckling of Simply Supported Shallow FGM Spherical Shells with Temperature dependent Material [Volume 11, Issue 2, 2010, Pages 39-65]
  • Eslami, M. R. Finite Element Analysis of Functionally Graded‎ ‎Piezoelectric Beams [Volume 11, Issue 1, 2010, Pages 45-73]
  • Eslami, Mohammad reza Mechanical and Thermal Stresses In a Linear Plastic FGM Hollow Cylinder Due to Axisymmetric Loads [Volume 16, Issue 2, 2015, Pages 39-65]
  • Eslami, Mohammad Reza Thermal Buckling of Functionally Graded Beams [Volume 10, Issue 2, 2009, Pages 65-81]
  • Eslami, Mohammad Reza Mechanical Buckling of FG Saturated Porous Rectangular Plate under Temperature Field [Volume 17, Issue 1, 2016, Pages 61-78]
  • Eslami, Mohammad Reza Dynamic Coupled Thermo-Viscoelasticity of a Spherical Hollow Domain [Volume 17, Issue 1, 2016, Pages 96-110]
  • Eslami, Mohammad Reza Cyclic Behavior of Beams Based on the Chaboche Unified Viscoplastic Model [Volume 18, Issue 2, 2017, Pages 63-81]
  • Eslami, Mohammad Reza Nonlinear Coupled Thermoelasticity of Functionally Graded Cylindrical Shells Resting on Elastic Foundation [Volume 24, Issue 2, 2023]
  • Eslami, M. R. A shell superelement for mechanical analysis of cylindrical structures [Volume 22, Issue 1, 2021, Pages 90-107]
  • Eslami, M. R. Coupled Thermoelasticity of FGM Truncated Conical Shells [Volume 22, Issue 1, 2021, Pages 127-142]
  • Etemadi, S. Variable Structure Behavioural Controller for Multi-agent Systems [Volume 10, Issue 2, 2009, Pages 49-63]
  • Eynalvandpour, A. Eulerian simulation of bubble columns reactors and effect of various parameters on the gas holdup [Volume 13, Issue 1, 2012, Pages 52-67]
  • Ezazi, S. An Enhanced Flux Treatment in Solving Incompressible Flow in a Forward-Facing Step [Volume 11, Issue 1, 2010, Pages 34-44]

F

  • Fadaei Tehrani, A.R. Improving the Surface Quality using Combined Ultrasonic Vibration and Magnetic Abrasive Finishing Method [Volume 14, Issue 2, 2013, Pages 37-49]
  • Fahimirad, A. Comparison of Performances for Air-Standard Atkinson and Dual Combustion Cycles with Heat Transfer Considerations [Volume 13, Issue 2, 2012, Pages 5-19]
  • Falahi, Vahid Cyclic Behavior of Beams Based on the Chaboche Unified Viscoplastic Model [Volume 18, Issue 2, 2017, Pages 63-81]
  • Faraji, Javad Low-dimensional Friction Modelling with Considering Random Asperity Distributions [Volume 24, Issue 1, 2023, Pages 119-140]
  • Farajidavar, A. Ionic Channel Blockage Effect on the Electromechanical Model of Human Gastric Wall Smooth Muscle Cells [Volume 23, Issue 2, 2022, Pages 33-47]
  • Farrokhfal, H. Rapid Subsonic Flutter Analysis for Low Aspect Ratio Composite Wings [Volume 23, Issue 1, 2022, Pages 68-86]
  • Farshid Far, Anooshivan The Lock-in Phenomenon in VIV using A Modified Wake Oscillator Model for both High and Low Mass-Damping Ratio [Volume 10, Issue 2, 2009, Pages 5-28]
  • Farshidianfar, A. Tuned Mass Dampers for Earthquake Vibrations of High-rise Buildings using Bee Colony Optimization Technique [Volume 13, Issue 1, 2012, Pages 36-51]
  • Farshidianfar, A. A Linear Approach to the Control of Vortex Induced Vibrations of Circular Cylinders with a 2-D Van der Pol Model for Structural Oscillator [Volume 12, Issue 2, 2011, Pages 54-72]
  • Farshidianfar, A. Some New Analytical Techniques for Duffing Oscillator with Very Strong Nonlinearity [Volume 10, Issue 1, 2009, Pages 37-54]
  • Farsi, M.A Uncertainty Analysis of Spray Injection Process in a Model Scale Liquid Fuel Micro-Motor [Volume 21, Issue 2, 2020]
  • Farzaneh-Gord, M. Proposing a Novel Configuration for CGSs Aimed at Reducing Energy Consumption and Exergy Destruction [Volume 15, Issue 1, 2014, Pages 5-27]
  • Farzaneh-Gord, M. Fuel Consumption Minimization in Greenhouses by Employing an Innovative System Taking Advantage of Solar and Geothermal Energies [Volume 15, Issue 2, 2014, Pages 91-115]
  • Farzaneh-Gord, Mahmood Dynamic Modelling of a Compressed Air Energy Storage System in a Grid Connected Photovoltaic Plant [Volume 16, Issue 1, 2015, Pages 29-51]
  • Fattahi Avati, A. Theoretical Study of Effective Parameters in the Friction Reduction by Ultrasonic Vibrations in Solid Surfaces [Volume 23, Issue 2, 2022, Pages 129-144]
  • Fattahi Avati, Ali Experimental Study of Parameters Affecting Friction Reduction in Solid-Liquid Interfaces using Ultrasonic Vibrations [Volume 24, Issue 1, 2023, Pages 85-98]
  • Fereidoonnezhad, B. A fiber-reinforced Transversely Isotropic Constitutive Model for Liver Tissue [Volume 14, Issue 2, 2013, Pages 88-97]
  • Fooladi-Mahani, M. Optimizing the Characteristics of the Motion of Steel Balls and their Impact on Shell Liners in SAG Mills [Volume 10, Issue 1, 2009, Pages 5-22]
  • Fouladi, N. One Dimensional Internal Ballistics Simulation of Solid Rocket Motor [Volume 14, Issue 1, 2013, Pages 5-16]

G

  • Garousi, Morteza Simultaneous estimation of heat fluxes applied to the wall of a channel with turbulent flow using inverse analysis [Volume 20, Issue 2, 2019, Pages 42-74]
  • Ghadam, F. New Correlations for the Prediction of Terminal Velocity and Drag Coefficient of a Bubble Rising [Volume 22, Issue 2, 2021, Pages 71-87]
  • Ghadamian, Hossein Thermo-economic analysis of absorption chiller integrated with a GE-F5 gas turbine for power enhancement (Zanbagh power plant, studied case) [Volume 19, Issue 1, 2018, Pages 20-33]
  • Ghaffari, A. Model Predictive Control System Design using ARMAX Identification Method for Car-following Behavior [Volume 14, Issue 1, 2013, Pages 48-71]
  • Ghaffari, A. Modeling and Intelligent Control System Design for Overtaking Maneuver in Autonomous Vehicles [Volume 13, Issue 1, 2012, Pages 68-87]
  • Ghaffari, Ali Model-based Approach for Multi-sensor Fault Identification in Power Plant Gas Turbines [Volume 21, Issue 1, 2020, Pages 65-86]
  • Ghaffari Some’e, H. Calculating Stress Intensity Factor for Small Edge Radial Cracks on an Orthotropic Thick-walled Cylinder Subjected to Internal Pressure using the Average Stress [Volume 14, Issue 2, 2013, Pages 98-109]
  • Ghafori, H. Experimental investigation of Convective Heat Transfer of Carbon Nanotubes / Water Flow in a helical Triple tube Heat Exchanger [Volume 22, Issue 2, 2021, Pages 106-115]
  • Ghasemi, Majid Numerical Simulation of Blood Flow Mixed with Magnetic Nanoparticles under the Influence of AC and DC Magnetic Field [Volume 15, Issue 1, 2014, Pages 68-81]
  • Ghassemi, M. Investigation of the Effects of Temperature, Mass Flow Rate of the Injected Fuel, Pore Diameter, Porosity and Ambient Pressure on the Amount of Pollutants in the Combustion Chamber [Volume 23, Issue 1, 2022, Pages 122-146]
  • Ghassemi, Majid Investigating the Impact of Geometric Parameters on Radial Fan Performance [(Articles in Press)]
  • Ghazizadeh, H. Modeling Diffusion to Thermal Wave Heat Propagation by Using Fractional Heat Conduction Constitutive Model [Volume 11, Issue 2, 2010, Pages 66-80]
  • Ghazizadeh, H. R. Hybrid differential transform-finite difference solution of 2D transient nonlinear annular fin equation [Volume 11, Issue 1, 2010, Pages 5-20]
  • Ghezelbash, R. Fuel Consumption Minimization in Greenhouses by Employing an Innovative System Taking Advantage of Solar and Geothermal Energies [Volume 15, Issue 2, 2014, Pages 91-115]
  • Gholipoor, Ahad Comparative study of ultrasonic vibrations assisted EDM and magnetic field assisted EDM processes [Volume 21, Issue 1, 2020, Pages 45-64]
  • Ghorbanpour Arani, Ali Vibration analysis of coupled double-nanocomposite microplate-systems [Volume 16, Issue 1, 2015, Pages 5-28]
  • Ghorbanpour Arani, Ali Elasticity Solution Approach for Functionally Graded Spherical Shell with Piezoelectric Properties [Volume 18, Issue 1, 2017, Pages 103-123]
  • Ghotbinasab, Samira Effects of Bronze Element Surface on Bubble Departure Size in Pool Boiling and its Prediction through ANN and GA Approaches [Volume 24, Issue 1, 2023, Pages 15-39]

H

  • Habibi, MohammadReza Introduced a Modified Set of Boundary Condition of Lattice Boltzmann Method Based on Bennett extension in Presence of Buoyancy Term Considering Variable Diffusion Coefficients [Volume 18, Issue 2, 2017, Pages 5-22]
  • Hafezalkotob, A. Thermomechanical Buckling of Simply Supported Shallow FGM Spherical Shells with Temperature dependent Material [Volume 11, Issue 2, 2010, Pages 39-65]
  • Haghaiegh, S. Prediction of Surface Roughness by Hybrid Artificial Neural Network and Evolutionary Algorithms in End Milling [Volume 15, Issue 1, 2014, Pages 39-47]
  • Haghgoo, M. R. Modeling of Upward Subcooled Flow Boiling of Refrigerant-113 in a Vertical Annulus [Volume 12, Issue 1, 2011, Pages 19-40]
  • Haghighat, H. A generalized upper bound solution for bimetallic rod extrusion through arbitrarily curved dies [Volume 13, Issue 1, 2012, Pages 23-35]
  • Haghighat, Heshmat Allah On the optimum die angle in rod drawing process considering strain-hardening effect of material [Volume 20, Issue 1, 2019, Pages 113-128]
  • Hajipour, A. Comparison of Performances for Air-Standard Atkinson and Dual Combustion Cycles with Heat Transfer Considerations [Volume 13, Issue 2, 2012, Pages 5-19]
  • Hamedi, J. Modeling and Wrench Feasible Workspace Analysis of a Cable Suspended Robot for Heavy Loads Handling [Volume 10, Issue 2, 2009, Pages 29-48]
  • Hamediestakhrsar, M.H. Numerical Investigation of the Circumferential Angle of the Axisymmetric Bypass Dual Throat Nozzle [Volume 22, Issue 1, 2021, Pages 143-154]
  • Harifi, Abbas Robust sliding mode control of uncertain nonlinear ‎ship autopilot system ‎ [Volume 21, Issue 2, 2020]
  • Hasanlu, Mojtaba Vibration Attenuation Timoshenko Beam Based on Optimal Placement Sensors/Actuators PZT Patches with LQR-MOPSO [Volume 17, Issue 1, 2016, Pages 26-60]
  • Hashemi, Seyyed Mohammad Moein Transient Response of a Functionally Graded Piezoelectric Rectangular Plane with Multiple Cracks under Electromechanical Impacts [Volume 24, Issue 1, 2023, Pages 40-69]
  • Hashemi, SH. Residual Stress Assessment in Spiral Steel Pipe with the Grade of API-X65 after Submerged Arc-welding [Volume 23, Issue 1, 2022, Pages 5-29]
  • Hashemi, Soheil Nonlinear vibration analysis of functionally graded plate in contact with fluid: Analytical study [Volume 21, Issue 1, 2020, Pages 110-134]
  • Hashemi, Soheil An analytical study for nonlinear vibration analysis of two-directional functionally graded rectangular plate [Volume 21, Issue 2, 2020]
  • Hassani, Alireza Crack analysis of an orthotropic circular bars reinforced by a magnetic coating under Saint-Venant torsion [Volume 20, Issue 2, 2019, Pages 87-111]
  • Hatefkia, Atefeh Mechanical and Thermal Stresses In a Linear Plastic FGM Hollow Cylinder Due to Axisymmetric Loads [Volume 16, Issue 2, 2015, Pages 39-65]
  • Heidari, Hamidreza The effect of support parameters on the force transmissibility of a flexible rotor [Volume 20, Issue 2, 2019, Pages 28-41]
  • Heydari, P. Evaluation and Simulation of Performance, Environmental and Economic Aspects of 1MW Photovoltaic Powerplant and Comparison with an Operational Powerplant [Volume 23, Issue 1, 2022, Pages 101-121]
  • Hormozi, Faramarz Experimental Design by using Taguchi Method for Sensitivity Analysis of CuO/Deionized Water Nanofluid Properties [Volume 24, Issue 2, 2023, Pages 6-41]
  • Hosein Ali Poor, Seyed Mostafa Parametric Study of Fuel Vapor Concentration Distribution Due to Vaporization of Fuel Droplets in Free Atmosphere [Volume 10, Issue 1, 2009, Pages 23-36]
  • Hosseinalipour, S. M. Parametric Study of Fuel Vapor Concentration Distribution Due to Vaporization of Fuel Droplets in Free Atmosphere [Volume 10, Issue 1, 2009, Pages 23-36]
  • Hosseini Hashemi, Sh. Low Velocity Impact on Relatively Thick Rectangular Plate under In-plane Loads Resting on Pasternak Elastic Foundation [Volume 12, Issue 1, 2011, Pages 41-67]

J

  • Jabbari, M. An Exact Solution for Quasi-Static Poro-Thermoelasticity in Spherical Coordin [Volume 12, Issue 1, 2011, Pages 86-108]
  • Jabbari, M. Mechanical Buckling of FG Saturated Porous Rectangular Plate with Piezoelectric Actuators [Volume 17, Issue 2, 2016, Pages 46-66]
  • Jabbari, mohsen Mechanical Buckling of FG Saturated Porous Rectangular Plate under Temperature Field [Volume 17, Issue 1, 2016, Pages 61-78]
  • Jabbari, mohsen Hollow Piezoelectric Cylinder under Transient Loads [Volume 18, Issue 2, 2017, Pages 23-38]
  • Jabbari, Mohsen Mechanical and Thermal Stresses In a Linear Plastic FGM Hollow Cylinder Due to Axisymmetric Loads [Volume 16, Issue 2, 2015, Pages 39-65]
  • Jafari, A. A. Nonlinear Vibration of Functionally Graded Cylindrical Shells under Radial Harmonic Load [Volume 13, Issue 2, 2012, Pages 20-34]
  • Jafari, Ali Asghar Vibration analysis of a rectangular composite plate in contact with fluid [Volume 17, Issue 2, 2016, Pages 67-83]
  • Jafari, Ali Asghar Nonlinear vibration analysis of functionally graded plate in contact with fluid: Analytical study [Volume 21, Issue 1, 2020, Pages 110-134]
  • Jafari, Ali Asghar An analytical study for nonlinear vibration analysis of two-directional functionally graded rectangular plate [Volume 21, Issue 2, 2020]
  • Jafari, Peymaan Wheelchair stabilization by the control of a spatial 3-RRS mechanism [Volume 17, Issue 2, 2016, Pages 84-100]
  • Jafarnia Dabanloo, N. Ionic Channel Blockage Effect on the Electromechanical Model of Human Gastric Wall Smooth Muscle Cells [Volume 23, Issue 2, 2022, Pages 33-47]
  • Jafarzadeh, A. A shell superelement for mechanical analysis of cylindrical structures [Volume 22, Issue 1, 2021, Pages 90-107]
  • Jahdi, M.H. Capturing of Shock Wave of Supersonic Flow over the Bump Channel with TVD, ACM and Jameson Methods [Volume 22, Issue 1, 2021, Pages 108-126]
  • Jahromi, M. A Hybrid Method for Prediction of Lean Blow Out in a Turbine Engine Combustion Chamber [Volume 22, Issue 2, 2021, Pages 54-70]
  • Jaiyesimi, Lawrence Transient Three-Dimensional Thermal Analysis of a Slab with internal heat generation and heated by a Point Moving Heat Source [Volume 18, Issue 1, 2017, Pages 43-64]
  • Jalili, F. A New Modified Harmony Search Optimization Algorithm for Evaluating Airfoil Shape Parameterization Methods and Aerodynamic Optimization [Volume 23, Issue 2, 2022, Pages 80-104]
  • Javadi, M. Effect of Selecting the Suitable Design on Production Costs of Pressure Vessels [Volume 23, Issue 2, 2022, Pages 48-62]
  • Javadi, Mehrdad Wheelchair stabilization by the control of a spatial 3-RRS mechanism [Volume 17, Issue 2, 2016, Pages 84-100]
  • Javanbakht, Alireza Bevel Pipe Inspection by Snake Robot [Volume 24, Issue 2, 2023, Pages 81-103]
  • Jayesimi, Lawrence Olumide Analysis of squeezing flow of viscous fluid under the influence of slip and magnetic field: comparative studies of different approximate analytical methods [Volume 20, Issue 2, 2019, Pages 5-27]

K

  • Kabganian, M Fuzzy Variable-Length Sliding Window Blockwise Least Square Algorithm with Application to Vehicle Heading Determination [Volume 9, Issue 2, 2020, Pages 59-79]
  • Kadkhodaei, M. Experimental Study on the Magnetomechanical Characteristics of Ni-Mn-Ga Ferromagnetic Shape Memory Alloy Single Crystals [Volume 14, Issue 1, 2013, Pages 72-84]
  • Kadkhodayan, M. A Closed-form Semi-analytical Elastic-Plastic Solution for Predicting the Onset of Flange Wrinkling in Deep-drawing of a Two-layered Circular Plate [Volume 14, Issue 2, 2013, Pages 5-36]
  • Kalhor, R. Low Velocity Impact on Relatively Thick Rectangular Plate under In-plane Loads Resting on Pasternak Elastic Foundation [Volume 12, Issue 1, 2011, Pages 41-67]
  • Kamali, Ali On the Corotational Beam Element Formulation in Large Deformation Analysis [Volume 19, Issue 2, 2018, Pages 94-115]
  • Kameli, P. Experimental Study on the Magnetomechanical Characteristics of Ni-Mn-Ga Ferromagnetic Shape Memory Alloy Single Crystals [Volume 14, Issue 1, 2013, Pages 72-84]
  • Kamgar, S. Emission Performance of a Diesel Engine Running on Biodiesel Fuel at Different Compression Ratios [Volume 15, Issue 1, 2014, Pages 82-98]
  • Karafi, Mohammad Reza Experimental Study of Parameters Affecting Friction Reduction in Solid-Liquid Interfaces using Ultrasonic Vibrations [Volume 24, Issue 1, 2023, Pages 85-98]
  • Karafi, Mohammad Reza Numerical Simulation of the Saline Water Electrolysis Process using Electromagnetic Waves [Volume 24, Issue 2, 2023, Pages 104-141]
  • Karafi, M.R. Theoretical Study of Effective Parameters in the Friction Reduction by Ultrasonic Vibrations in Solid Surfaces [Volume 23, Issue 2, 2022, Pages 129-144]
  • Karamoozravari, Mohammad Reza Elastoplastic Analysis of Rotating Disk of Variable Thickness Made of Functionally Graded Materials [Volume 24, Issue 1, 2023, Pages 99-118]
  • Karimi, S. New Correlations for the Prediction of Terminal Velocity and Drag Coefficient of a Bubble Rising [Volume 22, Issue 2, 2021, Pages 71-87]
  • Kassa, Ephrem Zeleke Design and Modification of One Arm Driven Manual Hemiplegic Wheelchair [Volume 19, Issue 1, 2018, Pages 63-78]
  • Kassaei, F. Numerical Modeling and Analysis of the Performance of a Stepped Solar Still using Multi-phase Method [Volume 23, Issue 1, 2022, Pages 87-100]
  • Keighobadi, J Fuzzy Variable-Length Sliding Window Blockwise Least Square Algorithm with Application to Vehicle Heading Determination [Volume 9, Issue 2, 2020, Pages 59-79]
  • Kermanian, Ali On the Corotational Beam Element Formulation in Large Deformation Analysis [Volume 19, Issue 2, 2018, Pages 94-115]
  • Keshavarz, Arash An experimental study on effects of opening on buckling of FML plates reinforced with basalt [Volume 20, Issue 2, 2019, Pages 112-124]
  • Khakzari, Zohreh Stabilization of Intrusive DMD based Reduced Order Model of the Convection-Diffusion Equations [(Articles in Press)]
  • Khalaj Amineh, S. Improving the Surface Quality using Combined Ultrasonic Vibration and Magnetic Abrasive Finishing Method [Volume 14, Issue 2, 2013, Pages 37-49]
  • Khaleghi, Ali Simultaneous estimation of heat fluxes applied to the wall of a channel with turbulent flow using inverse analysis [Volume 20, Issue 2, 2019, Pages 42-74]
  • Khalili, S. M. R. Nonlinear Vibration of Functionally Graded Cylindrical Shells under Radial Harmonic Load [Volume 13, Issue 2, 2012, Pages 20-34]
  • Kharazmi, Mehdi Low-dimensional Friction Modelling with Considering Random Asperity Distributions [Volume 24, Issue 1, 2023, Pages 119-140]
  • Kheiri Khah, Mohammad Mehdi Optimization of fuzzy controller for an SMA-actuated artificial finger robot [Volume 21, Issue 1, 2020, Pages 135-149]
  • Kheirkhah, M. M. Design, Fabrication and Intelligent Control of the Gripper Based on SMA Actuators [Volume 15, Issue 2, 2014, Pages 59-77]
  • Khodadadi, Mahdieh Experimental investigation for wake of the circular cylinder by attaching different number of tripping wires [Volume 17, Issue 1, 2016, Pages 5-25]
  • Khodayari, A. Design, Fabrication and Intelligent Control of the Gripper Based on SMA Actuators [Volume 15, Issue 2, 2014, Pages 59-77]
  • Khodayari, A. R. Optimization of fuzzy controller for an SMA-actuated artificial finger robot [Volume 21, Issue 1, 2020, Pages 135-149]
  • Khodayari, Alireza A New Model of Car Following Behavior Based on Lane Change Effects Using Anticipation and Evaluation Idea [Volume 16, Issue 2, 2015, Pages 26-38]
  • Khodayari, Alireza Detection and Recognition of Multi-language Traffic Sign Context by Intelligent Driver Assistance Systems [Volume 20, Issue 2, 2019, Pages 125-136]
  • Khodayari, A. R. Modeling and Intelligent Control System Design for Overtaking Maneuver in Autonomous Vehicles [Volume 13, Issue 1, 2012, Pages 68-87]
  • Khodayari, A.R. Model Predictive Control System Design using ARMAX Identification Method for Car-following Behavior [Volume 14, Issue 1, 2013, Pages 48-71]
  • Khodsiani, Milad Thermo-economic analysis of absorption chiller integrated with a GE-F5 gas turbine for power enhancement (Zanbagh power plant, studied case) [Volume 19, Issue 1, 2018, Pages 20-33]
  • Khooshehchin, Mohsen Effects of Bronze Element Surface on Bubble Departure Size in Pool Boiling and its Prediction through ANN and GA Approaches [Volume 24, Issue 1, 2023, Pages 15-39]
  • Khoramdel, K. Simulating Cooling Injection Effect of Trailing Edge of Gas Turbine Blade on Surface Mach Number Distribution of Blade [Volume 15, Issue 1, 2014, Pages 48-67]
  • Khoran, Eisa Friction stir spot welding of polycarbonate by a new design tool [Volume 16, Issue 2, 2015, Pages 66-76]
  • Khoran, Mohammad Friction stir spot welding of polycarbonate by a new design tool [Volume 16, Issue 2, 2015, Pages 66-76]
  • Khorasanizadeh, H. Effect of Magnetic Field on Heat Transfer of Nanofluid with Variable Properties on the Inclined Enclosure [Volume 15, Issue 1, 2014, Pages 28-38]
  • Khorsand, M. Thermo-elastic analysis of a functionally graded thick sphere by differential quadrature method [Volume 12, Issue 2, 2011, Pages 27-43]
  • Khorsandi, K. Design and Implementation of a Control Device for Intelligent Wheelchair by Combining Image Processing and Acceleration Sensor [Volume 22, Issue 2, 2021, Pages 88-105]
  • KhorsandiJou, Mahdi Wheelchair stabilization by the control of a spatial 3-RRS mechanism [Volume 17, Issue 2, 2016, Pages 84-100]
  • Khorshidvand, Ahmad reza Free vibration analysis of functionally graded rectangular plates via differential quadrature method [Volume 20, Issue 1, 2019, Pages 46-70]
  • Kiani, Mohammad amin Hollow Piezoelectric Cylinder under Transient Loads [Volume 18, Issue 2, 2017, Pages 23-38]
  • Kolahchi, Reza Vibration analysis of coupled double-nanocomposite microplate-systems [Volume 16, Issue 1, 2015, Pages 5-28]
  • Koohi, R. Rapid Subsonic Flutter Analysis for Low Aspect Ratio Composite Wings [Volume 23, Issue 1, 2022, Pages 68-86]
  • Kordbacheh, M. Application of Wavelet Transform as a Signal Processing Method for Defect Detection using Lamb Waves: Experimental Verification [Volume 13, Issue 2, 2012, Pages 81-95]
  • Kouhi, E. Experimental Investigation of the Flow Structure around a Pitching Airfoil by Mean and Instantaneous Data [Volume 23, Issue 2, 2022, Pages 5-32]
  • Kouhi, H. Variable Structure Behavioural Controller for Multi-agent Systems [Volume 10, Issue 2, 2009, Pages 49-63]
  • Koury, R. Proposing a Novel Configuration for CGSs Aimed at Reducing Energy Consumption and Exergy Destruction [Volume 15, Issue 1, 2014, Pages 5-27]
  • Koury, Ricardo N.N. Dynamic Modelling of a Compressed Air Energy Storage System in a Grid Connected Photovoltaic Plant [Volume 16, Issue 1, 2015, Pages 29-51]

M

  • Maererfat, M. Hybrid differential transform-finite difference solution of 2D transient nonlinear annular fin equation [Volume 11, Issue 1, 2010, Pages 5-20]
  • Mahbadi, H. Calculating Stress Intensity Factor for Small Edge Radial Cracks on an Orthotropic Thick-walled Cylinder Subjected to Internal Pressure using the Average Stress [Volume 14, Issue 2, 2013, Pages 98-109]
  • Mahbadi, H. Elastoplastic Analysis of Functionally Graded Beams under Mechanical Loads [Volume 13, Issue 2, 2012, Pages 35-58]
  • Mahbadi, H. Stress Intensity Factor of Radial Cracks for Rotating Disks and Cylinders using Average Stress Method [Volume 13, Issue 1, 2012, Pages 88-103]
  • Mahbadi, H. Mechanical Behaviour of Femoral Diaphyseal Cortical Bone using the Computed Tomography Data: A Numerical Investigation [Volume 22, Issue 2, 2021, Pages 5-20]
  • Mahbadi, Hossein Cyclic Behavior of Beams Based on the Chaboche Unified Viscoplastic Model [Volume 18, Issue 2, 2017, Pages 63-81]
  • Mahbadi, Hossein Effect of temperature on free vibration of functionally graded microbeams [Volume 19, Issue 1, 2018, Pages 5-19]
  • Mahdavi, E. Linear Thermoplastic Analysis of FGM Rotating Discs with Variable Thickness [Volume 14, Issue 2, 2013, Pages 73-87]
  • Mahdavi, M.M. On the optimum die angle in rod drawing process considering strain-hardening effect of material [Volume 20, Issue 1, 2019, Pages 113-128]
  • Mahdavy-Moghaddam, H. Numerical Investigation of the Circumferential Angle of the Axisymmetric Bypass Dual Throat Nozzle [Volume 22, Issue 1, 2021, Pages 143-154]
  • Mahdi, Miralam Numerical Study of the tongue geometry effects on the cavitation and performance of a centrifugal pump in off-design conditions [Volume 21, Issue 1, 2020, Pages 87-109]
  • Mahmoodi, M. Simulating Cooling Injection Effect of Trailing Edge of Gas Turbine Blade on Surface Mach Number Distribution of Blade [Volume 15, Issue 1, 2014, Pages 48-67]
  • Mahmoodi, M. Numerical Simulation of Beta Type Stirling Engine Considering Heat and Power Losses [Volume 15, Issue 2, 2014, Pages 5-27]
  • Mahmoudi, M. Mechanical Behaviour of Femoral Diaphyseal Cortical Bone using the Computed Tomography Data: A Numerical Investigation [Volume 22, Issue 2, 2021, Pages 5-20]
  • Mahmoudi Monfared, Mojtaba Analysis of Multiple Yoffe-type Moving Cracks in an Orthotropic Half-Plane under Mixed Mode Loading Condition [Volume 18, Issue 2, 2017, Pages 39-62]
  • Malek Jafarian, S.M. Study of flow over bluff bodies using combination of FD-CVC methods [Volume 22, Issue 2, 2021, Pages 38-53]
  • MalekJafarian, S. M. A New Modified Harmony Search Optimization Algorithm for Evaluating Airfoil Shape Parameterization Methods and Aerodynamic Optimization [Volume 23, Issue 2, 2022, Pages 80-104]
  • Mamouri, Amir Reza Experimental investigation for wake of the circular cylinder by attaching different number of tripping wires [Volume 17, Issue 1, 2016, Pages 5-25]
  • Mamouri, Amir Experimental Investigation of wake on an elliptic cylinder in the presence of tripping wire [Volume 18, Issue 1, 2017, Pages 81-102]
  • Mamouri, Amir Reza Stability investigation of hydraulic interconnected suspension system of a vehicle with a quaternion neural network controller [Volume 20, Issue 1, 2019, Pages 129-151]
  • Mardani, Morteza Modeling the Effects of Geometric Asymmetry on Aero-heating of the Ablative Noses [Volume 17, Issue 2, 2016, Pages 101-120]
  • Marefat, M. Modeling Diffusion to Thermal Wave Heat Propagation by Using Fractional Heat Conduction Constitutive Model [Volume 11, Issue 2, 2010, Pages 66-80]
  • Maroofiazar, Rasool Experimental Study on the Effect of Magnetic Field on Critical Heat Flux of Ferrofluid Flow Boiling in a Vertical Tube [Volume 19, Issue 2, 2018, Pages 116-126]
  • Masoumi, H. A New Modified Harmony Search Optimization Algorithm for Evaluating Airfoil Shape Parameterization Methods and Aerodynamic Optimization [Volume 23, Issue 2, 2022, Pages 80-104]
  • Meghdari, A Dynamic and Uncertainty Analysis of an Exoskeletal Robot to Assist Paraplegics Motion [Volume 9, Issue 2, 2020, Pages 6-25]
  • Mirabdolah Lavasani, Arash The Exergy Optimization of a Flat-Plate Solar Collector Using AL2O3-Water, CuO-Water and TiO2-Water Nanofluids by Genetic Algorithm [Volume 17, Issue 2, 2016, Pages 5-18]
  • Mirabdolah Lavasani, Arash Natural convection from horizontal noncircular annulus partially filled with porous sleeve [Volume 19, Issue 2, 2018, Pages 46-63]
  • Mirzaei, M. Analytical Modeling of Axial Collapse of Circular Hybrid Tubes [Volume 12, Issue 2, 2011, Pages 44-53]
  • Mirzaei, M. Multi-objective Optimization of Crashworthiness of Cylindrical Tubes as Energy Absorbers [Volume 12, Issue 1, 2011, Pages 5-18]
  • Mirzaei, Mehdi Time Delay Estimation and PID Controller Design using Smith Predictor for Lever Arm Platform [Volume 24, Issue 2, 2023, Pages 142-156]
  • Mirzaie, Habib Free and forced vibration behavior of cylinders made of two dimensional functionally graded materials using meshless method [Volume 21, Issue 2, 2020]
  • Moadel, Masoud Interval-based Solar PV Power Forecasting Using MLP-NSGAII in Niroo Research Institute of Iran [Volume 18, Issue 2, 2017, Pages 82-94]
  • Moayyedi, Mohammad Kazem Stabilization of Intrusive DMD based Reduced Order Model of the Convection-Diffusion Equations [(Articles in Press)]
  • Moayyedian, F. A Closed-form Semi-analytical Elastic-Plastic Solution for Predicting the Onset of Flange Wrinkling in Deep-drawing of a Two-layered Circular Plate [Volume 14, Issue 2, 2013, Pages 5-36]
  • Modabberifar, M. Numerical Study of Flow Field in New Design Cyclones with Different Vortex Finder Shapes [Volume 23, Issue 2, 2022, Pages 63-79]
  • Moeeni, H. Effect of Selecting the Suitable Design on Production Costs of Pressure Vessels [Volume 23, Issue 2, 2022, Pages 48-62]
  • Moghadam, M. M. The Johnson-cook Constitutive Equation for Compression Behavior of the New Piston Aluminum Alloys at High Temperatures [Volume 23, Issue 1, 2022, Pages 30-45]
  • Mohamadi, A. Stability analysis of an axially moving thin wall conical shells made of shape memory alloy [Volume 23, Issue 2, 2022, Pages 105-128]
  • Mohammadi, A Prediction of the Remaining useful Life of the Rolling Element Bearings using Recurrent Neural Network [Volume 21, Issue 2, 2020]
  • Mohammadi, A. Improving the Surface Quality using Combined Ultrasonic Vibration and Magnetic Abrasive Finishing Method [Volume 14, Issue 2, 2013, Pages 37-49]
  • Mohammadi, Arash Introduced a Modified Set of Boundary Condition of Lattice Boltzmann Method Based on Bennett extension in Presence of Buoyancy Term Considering Variable Diffusion Coefficients [Volume 18, Issue 2, 2017, Pages 5-22]
  • Mohammadi, M. R. Numerical Simulation of Blood Flow Mixed with Magnetic Nanoparticles under the Influence of AC and DC Magnetic Field [Volume 15, Issue 1, 2014, Pages 68-81]
  • Mohammadidoust, Akbar Effects of Bronze Element Surface on Bubble Departure Size in Pool Boiling and its Prediction through ANN and GA Approaches [Volume 24, Issue 1, 2023, Pages 15-39]
  • Mohammadpourfard, M. Eulerian simulation of bubble columns reactors and effect of various parameters on the gas holdup [Volume 13, Issue 1, 2012, Pages 52-67]
  • Mohammadpourfard, Mousa Experimental Study on the Effect of Magnetic Field on Critical Heat Flux of Ferrofluid Flow Boiling in a Vertical Tube [Volume 19, Issue 2, 2018, Pages 116-126]
  • Mohammadpourfard, Mousa Comparative study of ultrasonic vibrations assisted EDM and magnetic field assisted EDM processes [Volume 21, Issue 1, 2020, Pages 45-64]
  • Moharrami, Rasoul Numerical Study of the Effect of Materials’ Plastic Behavior on Equibiaxial Residual Stress Measurement Using Indentation [Volume 19, Issue 2, 2018, Pages 78-93]
  • Mohieddin Ghomshei, Mohammad Monsour Free vibration analysis of thin annular plates integrated with piezoelectric layers using differential quadrature method [Volume 20, Issue 1, 2019, Pages 71-93]
  • Mohseni, M. Study of flow over bluff bodies using combination of FD-CVC methods [Volume 22, Issue 2, 2021, Pages 38-53]
  • Mojahedin, A. Mechanical Buckling of FG Saturated Porous Rectangular Plate with Piezoelectric Actuators [Volume 17, Issue 2, 2016, Pages 46-66]
  • Mojahedin, Arvin Mechanical Buckling of FG Saturated Porous Rectangular Plate under Temperature Field [Volume 17, Issue 1, 2016, Pages 61-78]
  • Mojra, Afsaneh Viscoelastic analysis of malignant breast tumors using fractional derivative model and in vitro test data [(Articles in Press)]
  • Mojtahedi, M. The Johnson-cook Constitutive Equation for Compression Behavior of the New Piston Aluminum Alloys at High Temperatures [Volume 23, Issue 1, 2022, Pages 30-45]
  • Monfared, M. M. Mixed Mode Fracture Analysis of Multiple Interface Cracks [Volume 15, Issue 2, 2014, Pages 78-90]
  • Monfared, M. M. Multiple cracks in an elastic half-plane subjected to thermo-mechanical loading [Volume 17, Issue 2, 2016, Pages 19-45]
  • Monshizadeh, Arisa Viscoelastic analysis of malignant breast tumors using fractional derivative model and in vitro test data [(Articles in Press)]
  • Montazerin, N Effect of Volute and Rotor Widths on Squirrel Cage Fan Performance and Velocity Profiles [Volume 9, Issue 2, 2020, Pages 80-97]
  • Moradihaji, Kowsar Investigating the Impact of Geometric Parameters on Radial Fan Performance [(Articles in Press)]
  • Mosadegh, P. Improving the Surface Quality using Combined Ultrasonic Vibration and Magnetic Abrasive Finishing Method [Volume 14, Issue 2, 2013, Pages 37-49]
  • Mosayebi, M. Rapid Subsonic Flutter Analysis for Low Aspect Ratio Composite Wings [Volume 23, Issue 1, 2022, Pages 68-86]
  • Moshir Stekhareh, S. Gh. One Dimensional Internal Ballistics Simulation of Solid Rocket Motor [Volume 14, Issue 1, 2013, Pages 5-16]
  • Moslemi, Mohammadmahdi Design and Development of an Emergency BVM-based Ventilator with 2D Look-up Table Control Algorithm [Volume 24, Issue 2, 2023, Pages 42-59]
  • Mostofizadeh, A. R. One Dimensional Internal Ballistics Simulation of Solid Rocket Motor [Volume 14, Issue 1, 2013, Pages 5-16]
  • Mourad, Mohamed Influence of Biodiesel from Egyptian Used Cooking Oils on Performance and Emissions of Diesel Engine [Volume 18, Issue 1, 2017, Pages 65-80]
  • Mousavi, Seyed Mahmoud Multiple cracks in an elastic half-plane subjected to thermo-mechanical loading [Volume 17, Issue 2, 2016, Pages 19-45]
  • Mousavizade Noghabi, Seied Mostafa Friction stir spot welding of polycarbonate by a new design tool [Volume 16, Issue 2, 2015, Pages 66-76]

N

  • Naderan Tahan, Khosro The Effect of Repeated Impact Loading on Reservoir Rock Properties [Volume 21, Issue 2, 2020]
  • Naderan Tahan, Marzieh The Effect of Repeated Impact Loading on Reservoir Rock Properties [Volume 21, Issue 2, 2020]
  • Nadjafi, M Uncertainty Analysis of Spray Injection Process in a Model Scale Liquid Fuel Micro-Motor [Volume 21, Issue 2, 2020]
  • Naghdabadi, R. A fiber-reinforced Transversely Isotropic Constitutive Model for Liver Tissue [Volume 14, Issue 2, 2013, Pages 88-97]
  • Nazari, F. Investigation of welding parameters effects on residual stresses of resistance spot welding of AZ31 alloy [Volume 22, Issue 1, 2021, Pages 27-41]
  • Nazari, Mohsen Simultaneous estimation of heat fluxes applied to the wall of a channel with turbulent flow using inverse analysis [Volume 20, Issue 2, 2019, Pages 42-74]
  • Nazari, Sajjad Experimental Investigation of wake on an elliptic cylinder in the presence of tripping wire [Volume 18, Issue 1, 2017, Pages 81-102]
  • Nazaripoor, H. Numerical Study of Flow Field in New Design Cyclones with Different Vortex Finder Shapes [Volume 23, Issue 2, 2022, Pages 63-79]
  • Nickmehr, N. Some New Analytical Techniques for Duffing Oscillator with Very Strong Nonlinearity [Volume 10, Issue 1, 2009, Pages 37-54]
  • Nikbin, K.M. Thermal Buckling of Functionally Graded Beams [Volume 10, Issue 2, 2009, Pages 65-81]
  • Nikkhah, M. An Exact Elastodynamic Solution for Func-tionally Graded Thick-Walled Cylinders Subjected to Dynamic Pressures [Volume 10, Issue 1, 2009, Pages 56-75]
  • Niknami, A. Coupled Thermoelasticity Impact Response Analysis of Composite Plates with SMA Wires in Thermal Environments [Volume 16, Issue 1, 2015, Pages 73-96]
  • Nikookar, Ali Interval-based Solar PV Power Forecasting Using MLP-NSGAII in Niroo Research Institute of Iran [Volume 18, Issue 2, 2017, Pages 82-94]
  • Nourazar, Mahsa Multiple moving cracks in an orthotropic strip sandwiched between two piezoelectric layers [Volume 16, Issue 1, 2015, Pages 97-113]
  • Nouri-Khajavi, M. Model Predictive Control System Design using ARMAX Identification Method for Car-following Behavior [Volume 14, Issue 1, 2013, Pages 48-71]

O

  • Ojolo, Sunday Nonlinear Analysis of Integrated Kinetics and Heat Transfer Models of Slow Pyrolysis of Biomass Particles using Differential Transformation Method [Volume 19, Issue 2, 2018, Pages 5-45]
  • Oloomi, S. A. A. Effects of Temperature on Radiative Properties of Nanoscale Multilayer with Coherent Formulation in Visible Wavelengths [Volume 11, Issue 2, 2010, Pages 5-14]
  • Ommi, F Uncertainty Analysis of Spray Injection Process in a Model Scale Liquid Fuel Micro-Motor [Volume 21, Issue 2, 2020]
  • Ommian, M. Thermo-economic performance of an indirect hybrid system of solid oxide fuel cell and micro gas turbine [Volume 22, Issue 1, 2021, Pages 5-26]
  • Osheku, Charles Nonlinear Analysis of Integrated Kinetics and Heat Transfer Models of Slow Pyrolysis of Biomass Particles using Differential Transformation Method [Volume 19, Issue 2, 2018, Pages 5-45]
  • Ozgoli, Hassan Ali Thermo-economic analysis of absorption chiller integrated with a GE-F5 gas turbine for power enhancement (Zanbagh power plant, studied case) [Volume 19, Issue 1, 2018, Pages 20-33]

P

  • Pal, Pradip Kumar Parametric optimization of cylindrical grinding process through hybrid Taguchi method and RSM approach using genetic algorithm [Volume 19, Issue 1, 2018, Pages 34-62]
  • Palangsavar, Nabiollah Stability investigation of hydraulic interconnected suspension system of a vehicle with a quaternion neural network controller [Volume 20, Issue 1, 2019, Pages 129-151]
  • Pal Singh, Ajit A Comparative Study on the use of Butyl Esters of Soyabean and Sunflower Oils as Biodiesel Fuel for Compression Ignition Engine [Volume 12, Issue 1, 2011, Pages 68-85]
  • Parhizkar, H. Numerical Modeling and Analysis of the Performance of a Stepped Solar Still using Multi-phase Method [Volume 23, Issue 1, 2022, Pages 87-100]
  • Payan, Samira Effect of Insulated Up and Down Lid Motion on the Heat Transfer of a Lid-Driven Cavity with an attached fin [Volume 19, Issue 1, 2018, Pages 99-126]
  • Payeganeh, Gholamhasan Nonlinear Coupled Thermoelasticity of Functionally Graded Cylindrical Shells Resting on Elastic Foundation [Volume 24, Issue 2, 2023]
  • Pirkandi, J. Simulating Cooling Injection Effect of Trailing Edge of Gas Turbine Blade on Surface Mach Number Distribution of Blade [Volume 15, Issue 1, 2014, Pages 48-67]
  • Pirkandi, J. Numerical Simulation of Beta Type Stirling Engine Considering Heat and Power Losses [Volume 15, Issue 2, 2014, Pages 5-27]
  • Pirkandi, J. Thermo-economic performance of an indirect hybrid system of solid oxide fuel cell and micro gas turbine [Volume 22, Issue 1, 2021, Pages 5-26]
  • Pirkandi, J. A Hybrid Method for Prediction of Lean Blow Out in a Turbine Engine Combustion Chamber [Volume 22, Issue 2, 2021, Pages 54-70]
  • Pirkandi, J. Numerical Modeling and Analysis of the Performance of a Stepped Solar Still using Multi-phase Method [Volume 23, Issue 1, 2022, Pages 87-100]
  • Poultangari, R. Thermoelastic Analysis in Thick FGM Cylinders with Extended Profile [Volume 12, Issue 2, 2011, Pages 73-91]
  • Pourbagian, Mahdi Investigating the Impact of Geometric Parameters on Radial Fan Performance [(Articles in Press)]
  • Pourrajabian, Abolfazl Wind farm layout optimization using a Reynolds‐averaged Navier–Stokes model and a genetic algorithm [Volume 21, Issue 2, 2020]

Q

  • Qhafuri, Amir Experimental Study on the Effect of Magnetic Field on Critical Heat Flux of Ferrofluid Flow Boiling in a Vertical Tube [Volume 19, Issue 2, 2018, Pages 116-126]

R

  • Rafatnia, Sadra Time Delay Estimation and PID Controller Design using Smith Predictor for Lever Arm Platform [Volume 24, Issue 2, 2023, Pages 142-156]
  • Rafiee, Masoud Effects of Bronze Element Surface on Bubble Departure Size in Pool Boiling and its Prediction through ANN and GA Approaches [Volume 24, Issue 1, 2023, Pages 15-39]
  • Rahgozar, Saeed Wind farm layout optimization using a Reynolds‐averaged Navier–Stokes model and a genetic algorithm [Volume 21, Issue 2, 2020]
  • Rahi, Abbas Multi-objective Optimization of Two-Layer Microbeam used for Sensing of Viruses by Genetic Algorithm [Volume 24, Issue 1, 2023, Pages 70-84]
  • Rahmanei, Hamid Vibration analysis of a rectangular composite plate in contact with fluid [Volume 17, Issue 2, 2016, Pages 67-83]
  • Rahmani, O. Multiple Moving Cracks in a Nonhomogeneous Orthotropic Strip [Volume 14, Issue 1, 2013, Pages 17-32]
  • Rahmani Hanzaki, A. Stability analysis of an axially moving thin wall conical shells made of shape memory alloy [Volume 23, Issue 2, 2022, Pages 105-128]
  • Rahmanpour, Morteza Wind farm layout optimization using a Reynolds‐averaged Navier–Stokes model and a genetic algorithm [Volume 21, Issue 2, 2020]
  • Raissi, S. Effect of Selecting the Suitable Design on Production Costs of Pressure Vessels [Volume 23, Issue 2, 2022, Pages 48-62]
  • Rajabi, M. Residual Stress Assessment in Spiral Steel Pipe with the Grade of API-X65 after Submerged Arc-welding [Volume 23, Issue 1, 2022, Pages 5-29]
  • Ranamaye Lashkami, Fahime Experimental Design by using Taguchi Method for Sensitivity Analysis of CuO/Deionized Water Nanofluid Properties [Volume 24, Issue 2, 2023, Pages 6-41]
  • Rasaee, S. The Johnson-cook Constitutive Equation for Compression Behavior of the New Piston Aluminum Alloys at High Temperatures [Volume 23, Issue 1, 2022, Pages 30-45]
  • Rasam, Amin Subgrid-scale flux modeling of a passive scalar in turbulent channel flow using artificial neural network [(Articles in Press)]
  • Rasekh, Mohamad Numerical Study of the tongue geometry effects on the cavitation and performance of a centrifugal pump in off-design conditions [Volume 21, Issue 1, 2020, Pages 87-109]
  • Rashidi, Farzan Optimizing Design of Stand-alone Hybrid Solar Micro-CHP ‎Systems Using LUS Based Particle Swarm Optimization ‎Algorithm ‎ [Volume 21, Issue 1, 2020, Pages 5-20]
  • Rashidi, Farzan Robust sliding mode control of uncertain nonlinear ‎ship autopilot system ‎ [Volume 21, Issue 2, 2020]
  • Rashidi, Halimeh Optimizing Design of Stand-alone Hybrid Solar Micro-CHP ‎Systems Using LUS Based Particle Swarm Optimization ‎Algorithm ‎ [Volume 21, Issue 1, 2020, Pages 5-20]
  • Rashidi, M. M. Comparison of Performances for Air-Standard Atkinson and Dual Combustion Cycles with Heat Transfer Considerations [Volume 13, Issue 2, 2012, Pages 5-19]
  • Razavi, S. E. An Enhanced Flux Treatment in Solving Incompressible Flow in a Forward-Facing Step [Volume 11, Issue 1, 2010, Pages 34-44]
  • Rezaei, Masoud Mechanical Buckling of FG Saturated Porous Rectangular Plate under Temperature Field [Volume 17, Issue 1, 2016, Pages 61-78]
  • Rezaei, Masoud Mechanical Buckling of FG Saturated Porous Rectangular Plate with Piezoelectric Actuators [Volume 17, Issue 2, 2016, Pages 46-66]
  • Rezaeian, J. Prediction of Surface Roughness by Hybrid Artificial Neural Network and Evolutionary Algorithms in End Milling [Volume 15, Issue 1, 2014, Pages 39-47]
  • Rezaei Niya, S.M Effect of Volute and Rotor Widths on Squirrel Cage Fan Performance and Velocity Profiles [Volume 9, Issue 2, 2020, Pages 80-97]
  • Roshanian, J Nonlinear Non-minimum Phase Flight Vehicle Control Using Dynamic Sliding Manifold [Volume 9, Issue 2, 2020, Pages 42-58]
  • Rudrapati, Ramesh Parametric optimization of cylindrical grinding process through hybrid Taguchi method and RSM approach using genetic algorithm [Volume 19, Issue 1, 2018, Pages 34-62]

S

  • Sabetghadam-Isfahani, Armin Friction-Stir-Processing Effect on Fracture Toughness of Oil Pipelines in ST 37 Group Before/After Nano ZrO2-Coating [Volume 17, Issue 1, 2016, Pages 79-95]
  • Saboonchi, A. Effects of Temperature on Radiative Properties of Nanoscale Multilayer with Coherent Formulation in Visible Wavelengths [Volume 11, Issue 2, 2010, Pages 5-14]
  • Sadati, H. Modeling and Intelligent Control System Design for Overtaking Maneuver in Autonomous Vehicles [Volume 13, Issue 1, 2012, Pages 68-87]
  • Sadedel, Majid Design and Development of an Emergency BVM-based Ventilator with 2D Look-up Table Control Algorithm [Volume 24, Issue 2, 2023, Pages 42-59]
  • Sadedel, Majid Bevel Pipe Inspection by Snake Robot [Volume 24, Issue 2, 2023, Pages 81-103]
  • Sadighi, M. Analytical Modeling of Axial Collapse of Circular Hybrid Tubes [Volume 12, Issue 2, 2011, Pages 44-53]
  • Sadighi, M. Multi-objective Optimization of Crashworthiness of Cylindrical Tubes as Energy Absorbers [Volume 12, Issue 1, 2011, Pages 5-18]
  • Saedghi, Mohammad Hosein Numerical Simulation of the Saline Water Electrolysis Process using Electromagnetic Waves [Volume 24, Issue 2, 2023, Pages 104-141]
  • Safarpour, Hamed Vibration analysis of a double layer microshell utilizing a modified couple stress theory [Volume 21, Issue 1, 2020, Pages 21-44]
  • Safarpour, Pedram Buckling and static analyses of functionally graded saturated porous thick beam resting on elastic foundation based on higher order beam theory [Volume 20, Issue 1, 2019, Pages 94-112]
  • Safarpour, Pedram The effect of support parameters on the force transmissibility of a flexible rotor [Volume 20, Issue 2, 2019, Pages 28-41]
  • Safavinejad, A. A New Modified Harmony Search Optimization Algorithm for Evaluating Airfoil Shape Parameterization Methods and Aerodynamic Optimization [Volume 23, Issue 2, 2022, Pages 80-104]
  • Saffar, S. Enhancement of sound absorber by multi-area Helmholtz resonators array based on Fibonacci sequence [Volume 22, Issue 1, 2021, Pages 54-73]
  • Saffar, S. Investigation and Comparison of Three Popular Ultrasonic Generators (PZT, PVDFEMFi) for Employing in Acoustic Scaling [Volume 22, Issue 2, 2021, Pages 21-37]
  • Safikhani, H. Numerical Study of Flow Field in New Design Cyclones with Different Vortex Finder Shapes [Volume 23, Issue 2, 2022, Pages 63-79]
  • Sajjadi, Vahid Numerical Study of the tongue geometry effects on the cavitation and performance of a centrifugal pump in off-design conditions [Volume 21, Issue 1, 2020, Pages 87-109]
  • Saleh, M. S. Application of Wavelet Transform as a Signal Processing Method for Defect Detection using Lamb Waves: Experimental Verification [Volume 13, Issue 2, 2012, Pages 81-95]
  • Salehi, M. Mechanical Behaviour of Femoral Diaphyseal Cortical Bone using the Computed Tomography Data: A Numerical Investigation [Volume 22, Issue 2, 2021, Pages 5-20]
  • Salehi, Sina Design and Development of an Emergency BVM-based Ventilator with 2D Look-up Table Control Algorithm [Volume 24, Issue 2, 2023, Pages 42-59]
  • Salehinia, S. Model Predictive Control System Design using ARMAX Identification Method for Car-following Behavior [Volume 14, Issue 1, 2013, Pages 48-71]
  • Salehnia, S. Design, Fabrication and Intelligent Control of the Gripper Based on SMA Actuators [Volume 15, Issue 2, 2014, Pages 59-77]
  • Saviz, MohammadReza Elasticity Solution Approach for Functionally Graded Spherical Shell with Piezoelectric Properties [Volume 18, Issue 1, 2017, Pages 103-123]
  • Sedaghat, S. Effects of Temperature on Radiative Properties of Nanoscale Multilayer with Coherent Formulation in Visible Wavelengths [Volume 11, Issue 2, 2010, Pages 5-14]
  • Sedighi, M. Investigation of welding parameters effects on residual stresses of resistance spot welding of AZ31 alloy [Volume 22, Issue 1, 2021, Pages 27-41]
  • Sedighi, Mohammd reza Three-Dimensional Elasticity Solution of Single Layer Piezoelectric Panel [Volume 9, Issue 2, 2020, Pages 26-40]
  • Selk Ghafari, A Dynamic and Uncertainty Analysis of an Exoskeletal Robot to Assist Paraplegics Motion [Volume 9, Issue 2, 2020, Pages 6-25]
  • Seyedi, S. E. Multi-objective Optimization of Crashworthiness of Cylindrical Tubes as Energy Absorbers [Volume 12, Issue 1, 2011, Pages 5-18]
  • Seyed Roknizadeh, Seyed AliReza Free and forced vibration behavior of cylinders made of two dimensional functionally graded materials using meshless method [Volume 21, Issue 2, 2020]
  • Shabgard, Mohammad Reza Comparative study of ultrasonic vibrations assisted EDM and magnetic field assisted EDM processes [Volume 21, Issue 1, 2020, Pages 45-64]
  • Shadkami, M. Vibrational Analysis of Cables Using the Non Standard Finite Difference Method [Volume 22, Issue 1, 2021, Pages 74-89]
  • Shafiee, M. New Correlations for the Prediction of Terminal Velocity and Drag Coefficient of a Bubble Rising [Volume 22, Issue 2, 2021, Pages 71-87]
  • Shahabinejad, Esmaeil Vibration analysis of a double layer microshell utilizing a modified couple stress theory [Volume 21, Issue 1, 2020, Pages 21-44]
  • Shahgholi, M. Stability analysis of an axially moving thin wall conical shells made of shape memory alloy [Volume 23, Issue 2, 2022, Pages 105-128]
  • Shahgholi, Majid Nonlinear Coupled Thermoelasticity of Functionally Graded Cylindrical Shells Resting on Elastic Foundation [Volume 24, Issue 2, 2023]
  • Shahi, T. Fuel Consumption Minimization in Greenhouses by Employing an Innovative System Taking Advantage of Solar and Geothermal Energies [Volume 15, Issue 2, 2014, Pages 91-115]
  • Shahidian, Azadeh Numerical Simulation of Blood Flow Mixed with Magnetic Nanoparticles under the Influence of AC and DC Magnetic Field [Volume 15, Issue 1, 2014, Pages 68-81]
  • Shahriari, Behrooz Elastoplastic Analysis of Rotating Disk of Variable Thickness Made of Functionally Graded Materials [Volume 24, Issue 1, 2023, Pages 99-118]
  • Shahsiah, R. A General Form Solution for Elastic Buckling of Thin Cylinders Made of FGM under Axial Loading [Volume 12, Issue 2, 2011, Pages 6-26]
  • Shahsiah, R. Thermal Buckling of Functionally Graded Beams [Volume 10, Issue 2, 2009, Pages 65-81]
  • Shakeri, M Three-Dimensional Elasticity Solution of Single Layer Piezoelectric Panel [Volume 9, Issue 2, 2020, Pages 26-40]
  • Shakeri, M. Analytical Modeling of Axial Collapse of Circular Hybrid Tubes [Volume 12, Issue 2, 2011, Pages 44-53]
  • Shakeri, M. Multi-objective Optimization of Crashworthiness of Cylindrical Tubes as Energy Absorbers [Volume 12, Issue 1, 2011, Pages 5-18]
  • Sharifi, Mohammad Hossein Friction-Stir-Processing Effect on Fracture Toughness of Oil Pipelines in ST 37 Group Before/After Nano ZrO2-Coating [Volume 17, Issue 1, 2016, Pages 79-95]
  • Shariyat, M. An Analytical Shear Factor for FGM Circular Plates with Non-uniform Elastic Foundations and Normal and Shear Tractions [Volume 14, Issue 2, 2013, Pages 50-72]
  • Shariyat, M. A Differential Transform Approach for Modal Analysis of Variable Thickness Two-directional FGM Circular Plates on Elastic Foundations [Volume 11, Issue 2, 2010, Pages 15-38]
  • Shariyat, M. Non-Equilibruim Molecular Dynamics Simulation of Poiseuille Flow in a Nanochannel [Volume 11, Issue 1, 2010, Pages 21-33]
  • Shariyat, M. Coupled Thermoelasticity Impact Response Analysis of Composite Plates with SMA Wires in Thermal Environments [Volume 16, Issue 1, 2015, Pages 73-96]
  • Sharyat, Mohammad An Exact Elastodynamic Solution for Func-tionally Graded Thick-Walled Cylinders Subjected to Dynamic Pressures [Volume 10, Issue 1, 2009, Pages 56-75]
  • Sheikhzadeh, Gh. A. Effect of Magnetic Field on Heat Transfer of Nanofluid with Variable Properties on the Inclined Enclosure [Volume 15, Issue 1, 2014, Pages 28-38]
  • Shirazi, Mehran Subgrid-scale flux modeling of a passive scalar in turbulent channel flow using artificial neural network [(Articles in Press)]
  • Shokouhfar, Milad Mechanical and Thermal Stresses In a Linear Plastic FGM Hollow Cylinder Due to Axisymmetric Loads [Volume 16, Issue 2, 2015, Pages 39-65]
  • Sobamowo, G. M. Finite Difference Analysis of Transient Flow Analysis of Casson Magneto-nanofluid over a Vertical Porous Conical Plate under the Influence of Thermal Radiation [Volume 23, Issue 1, 2022, Pages 46-67]
  • Sobamowo, Gbeminiyi Musibau Nonlinear Analysis of Flow-induced Vibration in Fluid-conveying Structures using Differential Transformation Method with Cosine-Aftertreatment Technique [Volume 18, Issue 1, 2017, Pages 5-42]
  • Sobamowo, Gbeminiyi Musibau Transient Three-Dimensional Thermal Analysis of a Slab with internal heat generation and heated by a Point Moving Heat Source [Volume 18, Issue 1, 2017, Pages 43-64]
  • Sobamowo, Gbeminiyi Nonlinear Analysis of Integrated Kinetics and Heat Transfer Models of Slow Pyrolysis of Biomass Particles using Differential Transformation Method [Volume 19, Issue 2, 2018, Pages 5-45]
  • Sobamowo, Gbeminiyi Musibau Insight into the Boundary Layer Flows of Free Convection and Heat Transfer of Nanofluids over a Vertical Plate using Multi-Step Differential Transformation Method [Volume 20, Issue 1, 2019, Pages 5-45]
  • Sobamowo, Gbeminiyi Musibau Analysis of squeezing flow of viscous fluid under the influence of slip and magnetic field: comparative studies of different approximate analytical methods [Volume 20, Issue 2, 2019, Pages 5-27]
  • Soheili, S. Tuned Mass Dampers for Earthquake Vibrations of High-rise Buildings using Bee Colony Optimization Technique [Volume 13, Issue 1, 2012, Pages 36-51]
  • Soleyman, A. One Dimensional Internal Ballistics Simulation of Solid Rocket Motor [Volume 14, Issue 1, 2013, Pages 5-16]
  • Soorgee, M. H. Application of Wavelet Transform as a Signal Processing Method for Defect Detection using Lamb Waves: Experimental Verification [Volume 13, Issue 2, 2012, Pages 81-95]
  • Sourki, Reza Multiple cracks in an elastic half-plane subjected to thermo-mechanical loading [Volume 17, Issue 2, 2016, Pages 19-45]
  • Sourki, Reza Analysis of Multiple Yoffe-type Moving Cracks in an Orthotropic Half-Plane under Mixed Mode Loading Condition [Volume 18, Issue 2, 2017, Pages 39-62]
  • Sulieman, Abdurhaman Design and Modification of One Arm Driven Manual Hemiplegic Wheelchair [Volume 19, Issue 1, 2018, Pages 63-78]

T

  • Tabatabai Ghomsheh, F. Ionic Channel Blockage Effect on the Electromechanical Model of Human Gastric Wall Smooth Muscle Cells [Volume 23, Issue 2, 2022, Pages 33-47]
  • Taghadosi, H. Ionic Channel Blockage Effect on the Electromechanical Model of Human Gastric Wall Smooth Muscle Cells [Volume 23, Issue 2, 2022, Pages 33-47]
  • Taghvaeipour, A. A shell superelement for mechanical analysis of cylindrical structures [Volume 22, Issue 1, 2021, Pages 90-107]
  • Taghvaeipour, Afshin On the Corotational Beam Element Formulation in Large Deformation Analysis [Volume 19, Issue 2, 2018, Pages 94-115]
  • Tahani, Masoud Investigating the Influence of Piezoelectric Excitation on the Veering Phenomenon Associated with Electrostatically Coupled Micro-beams [Volume 24, Issue 2, 2023, Pages 60-80]
  • Taheri, A. Prediction of Surface Roughness by Hybrid Artificial Neural Network and Evolutionary Algorithms in End Milling [Volume 15, Issue 1, 2014, Pages 39-47]
  • Talebi, M. Experimental investigation of Convective Heat Transfer of Carbon Nanotubes / Water Flow in a helical Triple tube Heat Exchanger [Volume 22, Issue 2, 2021, Pages 106-115]
  • Talley, Mohammad Free vibration analysis of functionally graded rectangular plates via differential quadrature method [Volume 20, Issue 1, 2019, Pages 46-70]
  • Tamiru, Bethelhem Design and Modification of One Arm Driven Manual Hemiplegic Wheelchair [Volume 19, Issue 1, 2018, Pages 63-78]
  • Tarahhomi, M. H. Thermo-elastic analysis of a functionally graded thick sphere by differential quadrature method [Volume 12, Issue 2, 2011, Pages 27-43]
  • Tavakolian, M. Nonlinear Vibration of Functionally Graded Cylindrical Shells under Radial Harmonic Load [Volume 13, Issue 2, 2012, Pages 20-34]
  • Torabi Rad, M. Hybrid differential transform-finite difference solution of 2D transient nonlinear annular fin equation [Volume 11, Issue 1, 2010, Pages 5-20]

V

  • Vahidi, H. Stability analysis of an axially moving thin wall conical shells made of shape memory alloy [Volume 23, Issue 2, 2022, Pages 105-128]
  • Varmazyar, Mostafa Introduced a Modified Set of Boundary Condition of Lattice Boltzmann Method Based on Bennett extension in Presence of Buoyancy Term Considering Variable Diffusion Coefficients [Volume 18, Issue 2, 2017, Pages 5-22]
  • Vatankhahan, F. Mechanical Behaviour of Femoral Diaphyseal Cortical Bone using the Computed Tomography Data: A Numerical Investigation [Volume 22, Issue 2, 2021, Pages 5-20]
  • Vossough, Hossein Vibration analysis of coupled double-nanocomposite microplate-systems [Volume 16, Issue 1, 2015, Pages 5-28]
  • Vossoughi, G.R Dynamic and Uncertainty Analysis of an Exoskeletal Robot to Assist Paraplegics Motion [Volume 9, Issue 2, 2020, Pages 6-25]
  • Vossoughi, G.R. Variable Structure Behavioural Controller for Multi-agent Systems [Volume 10, Issue 2, 2009, Pages 49-63]

W

  • Waheed, Akindoye O Transient Three-Dimensional Thermal Analysis of a Slab with internal heat generation and heated by a Point Moving Heat Source [Volume 18, Issue 1, 2017, Pages 43-64]

Y

  • Yadegari, M. Capturing of Shock Wave of Supersonic Flow over the Bump Channel with TVD, ACM and Jameson Methods [Volume 22, Issue 1, 2021, Pages 108-126]
  • Yadegari, M. Investigation of the Effects of Temperature, Mass Flow Rate of the Injected Fuel, Pore Diameter, Porosity and Ambient Pressure on the Amount of Pollutants in the Combustion Chamber [Volume 23, Issue 1, 2022, Pages 122-146]
  • Yaghoubi, Reza Analysis of Multiple Yoffe-type Moving Cracks in an Orthotropic Half-Plane under Mixed Mode Loading Condition [Volume 18, Issue 2, 2017, Pages 39-62]
  • Yaghoubi, S. Evaluation and Simulation of Performance, Environmental and Economic Aspects of 1MW Photovoltaic Powerplant and Comparison with an Operational Powerplant [Volume 23, Issue 1, 2022, Pages 101-121]
  • Yarmohammad Tooski, Mehdi An experimental study on effects of opening on buckling of FML plates reinforced with basalt [Volume 20, Issue 2, 2019, Pages 112-124]
  • Yassi, Y. Experimental Study of a High Speed Micro Waterwheel [Volume 14, Issue 1, 2013, Pages 33-47]
  • Yazdanpanah, M J Fuzzy Variable-Length Sliding Window Blockwise Least Square Algorithm with Application to Vehicle Heading Determination [Volume 9, Issue 2, 2020, Pages 59-79]
  • Yimam, Abdurhaman Design and Modification of One Arm Driven Manual Hemiplegic Wheelchair [Volume 19, Issue 1, 2018, Pages 63-78]
  • Yinusa, Ahmed Amao Insight into the Boundary Layer Flows of Free Convection and Heat Transfer of Nanofluids over a Vertical Plate using Multi-Step Differential Transformation Method [Volume 20, Issue 1, 2019, Pages 5-45]
  • Yinusa,, Ahmed Amoo Analysis of squeezing flow of viscous fluid under the influence of slip and magnetic field: comparative studies of different approximate analytical methods [Volume 20, Issue 2, 2019, Pages 5-27]
  • Yoosefi Koma, M. S. Application of Wavelet Transform as a Signal Processing Method for Defect Detection using Lamb Waves: Experimental Verification [Volume 13, Issue 2, 2012, Pages 81-95]
  • Yousefi, Mehrdad Detection and Recognition of Multi-language Traffic Sign Context by Intelligent Driver Assistance Systems [Volume 20, Issue 2, 2019, Pages 125-136]
  • Youssef, Ismail Influence of Biodiesel from Egyptian Used Cooking Oils on Performance and Emissions of Diesel Engine [Volume 18, Issue 1, 2017, Pages 65-80]

Z

  • Zakeri, Manizhe Low-dimensional Friction Modelling with Considering Random Asperity Distributions [Volume 24, Issue 1, 2023, Pages 119-140]
  • Zamzamian, Seyed Amir Hossein Experimental Design by using Taguchi Method for Sensitivity Analysis of CuO/Deionized Water Nanofluid Properties [Volume 24, Issue 2, 2023, Pages 6-41]
  • Zanganeh, H. The Lock-in Phenomenon in VIV using A Modified Wake Oscillator Model for both High and Low Mass-Damping Ratio [Volume 10, Issue 2, 2009, Pages 5-28]
  • Zangeneh, Sh. The Johnson-cook Constitutive Equation for Compression Behavior of the New Piston Aluminum Alloys at High Temperatures [Volume 23, Issue 1, 2022, Pages 30-45]
  • Zarefar, B. Design, Fabrication and Intelligent Control of the Gripper Based on SMA Actuators [Volume 15, Issue 2, 2014, Pages 59-77]
  • Zohoor, H. Modeling and Wrench Feasible Workspace Analysis of a Cable Suspended Robot for Heavy Loads Handling [Volume 10, Issue 2, 2009, Pages 29-48]