A
-
Abbasi, H.
New Correlations for the Prediction of Terminal Velocity and Drag Coefficient of a Bubble Rising [Volume 22, Issue 2, 2021, Pages 71-87]
-
Abbasi, Hossein
Comparative study of ultrasonic vibrations assisted EDM and magnetic field assisted EDM processes [Volume 21, Issue 1, 2020, Pages 45-64]
-
Abbasi, M.
Finite Element Analysis of Functionally Graded Piezoelectric Beams [Volume 11, Issue 1, 2010, Pages 45-73]
-
Abdelfattah, Osama
Influence of Biodiesel from Egyptian Used Cooking Oils on Performance and Emissions of Diesel Engine [Volume 18, Issue 1, 2017, Pages 65-80]
-
Abiri, A.
New Correlations for the Prediction of Terminal Velocity and Drag Coefficient of a Bubble Rising [Volume 22, Issue 2, 2021, Pages 71-87]
-
Abolbashari, M.H.
Vibrational Analysis of Cables Using the Non Standard Finite Difference Method [Volume 22, Issue 1, 2021, Pages 74-89]
-
Acheampong, Juliet
Tensile properties and fatigue behavior of AHSS-DP 350/600 subjected to laser shock processing [Volume 20, Issue 2, 2019, Pages 74-86]
-
Afshar, Mahmoud
A Novel Straightforward Practice for Rotameter Calibration in Gas Flow Measurement [Volume 24, Issue 1, 2023, Pages 6-14]
-
Afshari, D.
Investigation of welding parameters effects on residual stresses of resistance spot welding of AZ31 alloy [Volume 22, Issue 1, 2021, Pages 27-41]
-
Afshari, E.
Thermo-economic performance of an indirect hybrid system of solid oxide fuel cell and micro gas turbine [Volume 22, Issue 1, 2021, Pages 5-26]
-
Afzalpour, Narges
Wheelchair stabilization by the control of a spatial 3-RRS mechanism [Volume 17, Issue 2, 2016, Pages 84-100]
-
Aghaei, A.R.
Effect of Magnetic Field on Heat Transfer of Nanofluid with Variable Properties on the Inclined Enclosure [Volume 15, Issue 1, 2014, Pages 28-38]
-
Ahangari Sisi, Zahra
Time Delay Estimation and PID Controller Design using Smith Predictor for Lever Arm Platform [Volume 24, Issue 2, 2023, Pages 142-156]
-
Ahmadi, Behzad
Thermo-economic analysis of absorption chiller integrated with a GE-F5 gas turbine for power enhancement (Zanbagh power plant, studied case) [Volume 19, Issue 1, 2018, Pages 20-33]
-
Ahmadi Boyaghchi, F.
Assessment of a Real Combined Cycle Power Plant with Supplementary Firing Based on Advanced Exergy/Exergoeconomic Methods [Volume 15, Issue 2, 2014, Pages 28-58]
-
Ahrar, A. J.
Influence Of Coiled Wire Presence On The Convective Heat Transfer Coefficients In R-600 Condensers [Volume 22, Issue 1, 2021, Pages 42-53]
-
Akbari, Afzal
Transient Response of a Functionally Graded Piezoelectric Rectangular Plane with Multiple Cracks under Electromechanical Impacts [Volume 24, Issue 1, 2023, Pages 40-69]
-
Akbari Alashti, R.
Linear Thermoplastic Analysis of FGM Rotating Discs with Variable Thickness [Volume 14, Issue 2, 2013, Pages 73-87]
-
Akbari Alashti, R.
Thermo-elastic analysis of a functionally graded thick sphere by differential quadrature method [Volume 12, Issue 2, 2011, Pages 27-43]
-
Akbarshahi, H.
Analytical Modeling of Axial Collapse of Circular Hybrid Tubes [Volume 12, Issue 2, 2011, Pages 44-53]
-
Alam-Hakkakan, Hosein Ali
Investigating the Influence of Piezoelectric Excitation on the Veering Phenomenon Associated with Electrostatically Coupled Micro-beams [Volume 24, Issue 2, 2023, Pages 60-80]
-
Alaribe, Kenneth O
Analysis of squeezing flow of viscous fluid under the influence of slip and magnetic field: comparative studies of different approximate analytical methods [Volume 20, Issue 2, 2019, Pages 5-27]
-
Alasty, A.
Variable Structure Behavioural Controller for Multi-agent Systems [Volume 10, Issue 2, 2009, Pages 49-63]
-
Alimardani, F.
Modeling and Intelligent Control System Design for Overtaking Maneuver in Autonomous Vehicles [Volume 13, Issue 1, 2012, Pages 68-87]
-
Alipour, A.
Numerical Simulation of Beta Type Stirling Engine Considering Heat and Power Losses [Volume 15, Issue 2, 2014, Pages 5-27]
-
Alipour, M. M.
An Analytical Shear Factor for FGM Circular Plates with Non-uniform Elastic Foundations and Normal and Shear Tractions [Volume 14, Issue 2, 2013, Pages 50-72]
-
Alipour, M. M.
A Differential Transform Approach for Modal Analysis of Variable Thickness Two-directional FGM Circular Plates on Elastic Foundations [Volume 11, Issue 2, 2010, Pages 15-38]
-
Alipour, M.
Non-Equilibruim Molecular Dynamics Simulation of Poiseuille Flow in a Nanochannel [Volume 11, Issue 1, 2010, Pages 21-33]
-
Alizadeh, M.
Linear Thermoplastic Analysis of FGM Rotating Discs with Variable Thickness [Volume 14, Issue 2, 2013, Pages 73-87]
-
Alizadeh Attar, Alireza
A Novel Straightforward Practice for Rotameter Calibration in Gas Flow Measurement [Volume 24, Issue 1, 2023, Pages 6-14]
-
Alizadeh Attar, Mehdi
A Novel Straightforward Practice for Rotameter Calibration in Gas Flow Measurement [Volume 24, Issue 1, 2023, Pages 6-14]
-
Allam, Sabry
Influence of Biodiesel from Egyptian Used Cooking Oils on Performance and Emissions of Diesel Engine [Volume 18, Issue 1, 2017, Pages 65-80]
-
Aminfar, H.
Eulerian simulation of bubble columns reactors and effect of various parameters on the gas holdup [Volume 13, Issue 1, 2012, Pages 52-67]
-
Aminfar, H.
Modeling of Upward Subcooled Flow Boiling of Refrigerant-113 in a Vertical Annulus [Volume 12, Issue 1, 2011, Pages 19-40]
-
Aminfar, H.
Experimental Study on the Effect of Magnetic Field on Critical Heat Flux of Ferrofluid Flow Boiling in a Vertical Tube [Volume 19, Issue 2, 2018, Pages 116-126]
-
Aminy, Mohammad
Thermo-economic analysis of absorption chiller integrated with a GE-F5 gas turbine for power enhancement (Zanbagh power plant, studied case) [Volume 19, Issue 1, 2018, Pages 20-33]
-
Amirkhani, Saeed
Model-based Approach for Multi-sensor Fault Identification in Power Plant Gas Turbines [Volume 21, Issue 1, 2020, Pages 65-86]
-
Amoah, Martin
Tensile properties and fatigue behavior of AHSS-DP 350/600 subjected to laser shock processing [Volume 20, Issue 2, 2019, Pages 74-86]
-
Amrollahipour, R.
Experimental Study on the Magnetomechanical Characteristics of Ni-Mn-Ga Ferromagnetic Shape Memory Alloy Single Crystals [Volume 14, Issue 1, 2013, Pages 72-84]
-
Anbumani, K.
A Comparative Study on the use of Butyl Esters of Soyabean and Sunflower Oils as Biodiesel Fuel for Compression Ignition Engine [Volume 12, Issue 1, 2011, Pages 68-85]
-
Arabi, Seyed Mehdi
Thermo-economic analysis of absorption chiller integrated with a GE-F5 gas turbine for power enhancement (Zanbagh power plant, studied case) [Volume 19, Issue 1, 2018, Pages 20-33]
-
Arabkoohsar, A.
Proposing a Novel Configuration for CGSs Aimed at Reducing Energy Consumption and Exergy Destruction [Volume 15, Issue 1, 2014, Pages 5-27]
-
Arabkoohsar, A.
Fuel Consumption Minimization in Greenhouses by Employing an Innovative System Taking Advantage of Solar and Geothermal Energies [Volume 15, Issue 2, 2014, Pages 91-115]
-
Arabkoohsar, Ahmad
Dynamic Modelling of a Compressed Air Energy Storage System in a Grid Connected Photovoltaic Plant [Volume 16, Issue 1, 2015, Pages 29-51]
-
Arbab Tafti, M.R.
Model Predictive Control System Design using ARMAX Identification Method for Car-following Behavior [Volume 14, Issue 1, 2013, Pages 48-71]
-
Arghavani, J.
A fiber-reinforced Transversely Isotropic Constitutive Model for Liver Tissue [Volume 14, Issue 2, 2013, Pages 88-97]
-
Armin, A.
Finite Element Analysis of Functionally Graded Piezoelectric Beams [Volume 11, Issue 1, 2010, Pages 45-73]
-
Arteshyar, Koosha
Free vibration analysis of thin annular plates integrated with piezoelectric layers using differential quadrature method [Volume 20, Issue 1, 2019, Pages 71-93]
-
Asemi, Kamran
Buckling and static analyses of functionally graded saturated porous thick beam resting on elastic foundation based on higher order beam theory [Volume 20, Issue 1, 2019, Pages 94-112]
-
Asgari, G. R.
A generalized upper bound solution for bimetallic rod extrusion through arbitrarily curved dies [Volume 13, Issue 1, 2012, Pages 23-35]
-
Askari, Amir Reza
Investigating the Influence of Piezoelectric Excitation on the Veering Phenomenon Associated with Electrostatically Coupled Micro-beams [Volume 24, Issue 2, 2023, Pages 60-80]
-
Ayatollahi, M.
Multiple Moving Cracks in a Nonhomogeneous Orthotropic Strip [Volume 14, Issue 1, 2013, Pages 17-32]
-
Ayatollahi, M.
Mixed Mode Fracture Analysis of Multiple Interface Cracks [Volume 15, Issue 2, 2014, Pages 78-90]
-
Ayatollahi, Mojtaba
Multiple cracks in an elastic half-plane subjected to thermo-mechanical loading [Volume 17, Issue 2, 2016, Pages 19-45]
-
Ayatollahi, Mojtaba
Transient Response of a Functionally Graded Piezoelectric Rectangular Plane with Multiple Cracks under Electromechanical Impacts [Volume 24, Issue 1, 2023, Pages 40-69]
-
Azizi, T.
Assessment of a Real Combined Cycle Power Plant with Supplementary Firing Based on Advanced Exergy/Exergoeconomic Methods [Volume 15, Issue 2, 2014, Pages 28-58]
B
-
Babaei, Masoud
Buckling and static analyses of functionally graded saturated porous thick beam resting on elastic foundation based on higher order beam theory [Volume 20, Issue 1, 2019, Pages 94-112]
-
Badri, M. A.
Using Weibull probability distribution to calibrate prevailing wind applying in oil spill simulation [Volume 13, Issue 1, 2012, Pages 5-22]
-
Bagheri, R.
Multiple Moving Cracks in a Nonhomogeneous Orthotropic Strip [Volume 14, Issue 1, 2013, Pages 17-32]
-
Bagheri, R.
Mixed Mode Fracture Analysis of Multiple Interface Cracks [Volume 15, Issue 2, 2014, Pages 78-90]
-
Bagheri, Rasul
Transient Response of a Functionally Graded Piezoelectric Rectangular Plane with Multiple Cracks under Electromechanical Impacts [Volume 24, Issue 1, 2023, Pages 40-69]
-
Bagherinejad, Navid
A Novel Straightforward Practice for Rotameter Calibration in Gas Flow Measurement [Volume 24, Issue 1, 2023, Pages 6-14]
-
Bahrainian, Seyed Saied
The Effect of Repeated Impact Loading on Reservoir Rock Properties [Volume 21, Issue 2, 2020]
-
Bahrami, M
Nonlinear Non-minimum Phase Flight Vehicle Control Using Dynamic Sliding Manifold [Volume 9, Issue 2, 2020, Pages 42-58]
-
Bahtui, A.
Thermoelastic Analysis in Thick FGM Cylinders with Extended Profile [Volume 12, Issue 2, 2011, Pages 73-91]
-
Baidoo, Philip
Tensile properties and fatigue behavior of AHSS-DP 350/600 subjected to laser shock processing [Volume 20, Issue 2, 2019, Pages 74-86]
-
Bakhsheshy, Ali
Effect of temperature on free vibration of functionally graded microbeams [Volume 19, Issue 1, 2018, Pages 5-19]
-
Bakkhoshnevis, Abdolamir
Experimental investigation for wake of the circular cylinder by attaching different number of tripping wires [Volume 17, Issue 1, 2016, Pages 5-25]
-
Bakkhoshnevis, Abdolamir
Experimental Investigation of wake on an elliptic cylinder in the presence of tripping wire [Volume 18, Issue 1, 2017, Pages 81-102]
-
Bak Khoshnevis, A.
Experimental Investigation of the Flow Structure around a Pitching Airfoil by Mean and Instantaneous Data [Volume 23, Issue 2, 2022, Pages 5-32]
-
Bandyopadhyay, Asish
Parametric optimization of cylindrical grinding process through hybrid Taguchi method and RSM approach using genetic algorithm [Volume 19, Issue 1, 2018, Pages 34-62]
-
Barati, F.
Calculating Stress Intensity Factor for Small Edge Radial Cracks on an Orthotropic Thick-walled Cylinder Subjected to Internal Pressure using the Average Stress [Volume 14, Issue 2, 2013, Pages 98-109]
-
Basiri, M.
Rapid Subsonic Flutter Analysis for Low Aspect Ratio Composite Wings [Volume 23, Issue 1, 2022, Pages 68-86]
-
Bastanfar, Marzieh
Cracked piezoelectric layer bounded between two orthotropic half-planes [Volume 19, Issue 1, 2018, Pages 79-98]
-
Bateni, M.
Coupled Thermoelasticity of FGM Truncated Conical Shells [Volume 22, Issue 1, 2021, Pages 127-142]
-
Bayati Nezhad, M.A
Prediction of the Remaining useful Life of the Rolling Element Bearings using Recurrent Neural Network [Volume 21, Issue 2, 2020]
-
Behjat, B.
Finite Element Analysis of Functionally Graded Piezoelectric Beams [Volume 11, Issue 1, 2010, Pages 45-73]
-
Behzad, E.
A Hybrid Method for Prediction of Lean Blow Out in a Turbine Engine Combustion Chamber [Volume 22, Issue 2, 2021, Pages 54-70]
-
Bigdeloo, Fatemeh
Stabilization of Intrusive DMD based Reduced Order Model of the Convection-Diffusion Equations [(Articles in Press)]
-
Boustani, Esmail
The Exergy Optimization of a Flat-Plate Solar Collector Using AL2O3-Water, CuO-Water and TiO2-Water Nanofluids by Genetic Algorithm [Volume 17, Issue 2, 2016, Pages 5-18]
-
Boyaghchi, F. Ahmadi
Thermodynamic Assessment and Parametric Study of a Supercritical Thermal Power Plant [Volume 13, Issue 2, 2012, Pages 59-80]
C
-
Chaibakhsh, Ali
Model-based Approach for Multi-sensor Fault Identification in Power Plant Gas Turbines [Volume 21, Issue 1, 2020, Pages 65-86]
-
Chakerizade, A.
Influence Of Coiled Wire Presence On The Convective Heat Transfer Coefficients In R-600 Condensers [Volume 22, Issue 1, 2021, Pages 42-53]
-
Cheloee Darabi, A.
Linear Thermoplastic Analysis of FGM Rotating Discs with Variable Thickness [Volume 14, Issue 2, 2013, Pages 73-87]
-
Cheraghpour Samavati, F.
Design and Implementation of a Control Device for Intelligent Wheelchair by Combining Image Processing and Acceleration Sensor [Volume 22, Issue 2, 2021, Pages 88-105]
D
-
Dadi, V.
Emission Performance of a Diesel Engine Running on Biodiesel Fuel at Different Compression Ratios [Volume 15, Issue 1, 2014, Pages 82-98]
-
Damangir, E
Effect of Volute and Rotor Widths on Squirrel Cage Fan Performance and Velocity Profiles [Volume 9, Issue 2, 2020, Pages 80-97]
-
Daneshmehr, A.R
Three-Dimensional Elasticity Solution of Single Layer Piezoelectric Panel [Volume 9, Issue 2, 2020, Pages 26-40]
-
Davood Abadi, A
Prediction of the Remaining useful Life of the Rolling Element Bearings using Recurrent Neural Network [Volume 21, Issue 2, 2020]
-
Davoodbeygi, Yegane
Friction-Stir-Processing Effect on Fracture Toughness of Oil Pipelines in ST 37 Group Before/After Nano ZrO2-Coating [Volume 17, Issue 1, 2016, Pages 79-95]
-
Davoodi Yekta, Mohammadreza
Multi-objective Optimization of Two-Layer Microbeam used for Sensing of Viruses by Genetic Algorithm [Volume 24, Issue 1, 2023, Pages 70-84]
-
Dehbani, H.
An Exact Solution for Quasi-Static Poro-Thermoelasticity in Spherical Coordin [Volume 12, Issue 1, 2011, Pages 86-108]
-
Dehghan, Maziar
Wind farm layout optimization using a Reynolds‐averaged Navier–Stokes model and a genetic algorithm [Volume 21, Issue 2, 2020]
-
Dehghan Niestanak, Vahid
Design and Development of an Emergency BVM-based Ventilator with 2D Look-up Table Control Algorithm [Volume 24, Issue 2, 2023, Pages 42-59]
-
Dehkordi, A.H
Effect of Volute and Rotor Widths on Squirrel Cage Fan Performance and Velocity Profiles [Volume 9, Issue 2, 2020, Pages 80-97]
-
Dolatabadi, N.
A Linear Approach to the Control of Vortex Induced Vibrations of Circular Cylinders with a 2-D Van der Pol Model for Structural Oscillator [Volume 12, Issue 2, 2011, Pages 54-72]
-
Dorali, M.R.
Mechanical Behaviour of Femoral Diaphyseal Cortical Bone using the Computed Tomography Data: A Numerical Investigation [Volume 22, Issue 2, 2021, Pages 5-20]
-
Doustdar, M. M.
Parametric Study of Fuel Vapor Concentration Distribution Due to Vaporization of Fuel Droplets in Free Atmosphere [Volume 10, Issue 1, 2009, Pages 23-36]
E
-
Ebrahimi, B
Nonlinear Non-minimum Phase Flight Vehicle Control Using Dynamic Sliding Manifold [Volume 9, Issue 2, 2020, Pages 42-58]
-
Ebrahimi, Reza
Wind farm layout optimization using a Reynolds‐averaged Navier–Stokes model and a genetic algorithm [Volume 21, Issue 2, 2020]
-
Ebrahimi-Nejad Rafsanjani, S.
Optimizing the Characteristics of the Motion of Steel Balls and their Impact on Shell Liners in SAG Mills [Volume 10, Issue 1, 2009, Pages 5-22]
-
Eghbali, Akbar
Numerical Simulation of the Saline Water Electrolysis Process using Electromagnetic Waves [Volume 24, Issue 2, 2023, Pages 104-141]
-
Eghbalian, Hirad
Dynamic Coupled Thermo-Viscoelasticity of a Spherical Hollow Domain [Volume 17, Issue 1, 2016, Pages 96-110]
-
Ehteram, H. R.
Effect of Magnetic Field on Heat Transfer of Nanofluid with Variable Properties on the Inclined Enclosure [Volume 15, Issue 1, 2014, Pages 28-38]
-
Ehyaei, Javad
Vibration analysis of a double layer microshell utilizing a modified couple stress theory [Volume 21, Issue 1, 2020, Pages 21-44]
-
Eliasi, H.
Coupled Thermoelasticity of FGM Truncated Conical Shells [Volume 22, Issue 1, 2021, Pages 127-142]
-
Eliasi, Hossein
Nonlinear Coupled Thermoelasticity of Functionally Graded Cylindrical Shells Resting on Elastic Foundation [Volume 24, Issue 2, 2023]
-
Eltawwab, Ali
Influence of Biodiesel from Egyptian Used Cooking Oils on Performance and Emissions of Diesel Engine [Volume 18, Issue 1, 2017, Pages 65-80]
-
Eslami, M. R.
Thermoelastic Analysis in Thick FGM Cylinders with Extended Profile [Volume 12, Issue 2, 2011, Pages 73-91]
-
Eslami, M. R.
Thermomechanical Buckling of Simply Supported Shallow FGM Spherical Shells with Temperature dependent Material [Volume 11, Issue 2, 2010, Pages 39-65]
-
Eslami, M. R.
Finite Element Analysis of Functionally Graded Piezoelectric Beams [Volume 11, Issue 1, 2010, Pages 45-73]
-
Eslami, Mohammad reza
Mechanical and Thermal Stresses In a Linear Plastic FGM Hollow Cylinder Due to Axisymmetric Loads [Volume 16, Issue 2, 2015, Pages 39-65]
-
Eslami, Mohammad Reza
Thermal Buckling of Functionally Graded Beams [Volume 10, Issue 2, 2009, Pages 65-81]
-
Eslami, Mohammad Reza
Mechanical Buckling of FG Saturated Porous Rectangular Plate under Temperature Field [Volume 17, Issue 1, 2016, Pages 61-78]
-
Eslami, Mohammad Reza
Dynamic Coupled Thermo-Viscoelasticity of a Spherical Hollow Domain [Volume 17, Issue 1, 2016, Pages 96-110]
-
Eslami, Mohammad Reza
Cyclic Behavior of Beams Based on the Chaboche Unified Viscoplastic Model [Volume 18, Issue 2, 2017, Pages 63-81]
-
Eslami, Mohammad Reza
Nonlinear Coupled Thermoelasticity of Functionally Graded Cylindrical Shells Resting on Elastic Foundation [Volume 24, Issue 2, 2023]
-
Eslami, M. R.
A shell superelement for mechanical analysis of cylindrical structures [Volume 22, Issue 1, 2021, Pages 90-107]
-
Eslami, M. R.
Coupled Thermoelasticity of FGM Truncated Conical Shells [Volume 22, Issue 1, 2021, Pages 127-142]
-
Etemadi, S.
Variable Structure Behavioural Controller for Multi-agent Systems [Volume 10, Issue 2, 2009, Pages 49-63]
-
Eynalvandpour, A.
Eulerian simulation of bubble columns reactors and effect of various parameters on the gas holdup [Volume 13, Issue 1, 2012, Pages 52-67]
-
Ezazi, S.
An Enhanced Flux Treatment in Solving Incompressible Flow in a Forward-Facing Step [Volume 11, Issue 1, 2010, Pages 34-44]
F
-
Fadaei Tehrani, A.R.
Improving the Surface Quality using Combined Ultrasonic Vibration and Magnetic Abrasive Finishing Method [Volume 14, Issue 2, 2013, Pages 37-49]
-
Fahimirad, A.
Comparison of Performances for Air-Standard Atkinson and Dual Combustion Cycles with Heat Transfer Considerations [Volume 13, Issue 2, 2012, Pages 5-19]
-
Falahi, Vahid
Cyclic Behavior of Beams Based on the Chaboche Unified Viscoplastic Model [Volume 18, Issue 2, 2017, Pages 63-81]
-
Faraji, Javad
Low-dimensional Friction Modelling with Considering Random Asperity Distributions [Volume 24, Issue 1, 2023, Pages 119-140]
-
Farajidavar, A.
Ionic Channel Blockage Effect on the Electromechanical Model of Human Gastric Wall Smooth Muscle Cells [Volume 23, Issue 2, 2022, Pages 33-47]
-
Farrokhfal, H.
Rapid Subsonic Flutter Analysis for Low Aspect Ratio Composite Wings [Volume 23, Issue 1, 2022, Pages 68-86]
-
Farshid Far, Anooshivan
The Lock-in Phenomenon in VIV using A Modified Wake Oscillator Model for both High and Low Mass-Damping Ratio [Volume 10, Issue 2, 2009, Pages 5-28]
-
Farshidianfar, A.
Tuned Mass Dampers for Earthquake Vibrations of High-rise Buildings using Bee Colony Optimization Technique [Volume 13, Issue 1, 2012, Pages 36-51]
-
Farshidianfar, A.
A Linear Approach to the Control of Vortex Induced Vibrations of Circular Cylinders with a 2-D Van der Pol Model for Structural Oscillator [Volume 12, Issue 2, 2011, Pages 54-72]
-
Farshidianfar, A.
Some New Analytical Techniques for Duffing Oscillator with Very Strong Nonlinearity [Volume 10, Issue 1, 2009, Pages 37-54]
-
Farsi, M.A
Uncertainty Analysis of Spray Injection Process in a Model Scale Liquid Fuel Micro-Motor [Volume 21, Issue 2, 2020]
-
Farzaneh-Gord, M.
Proposing a Novel Configuration for CGSs Aimed at Reducing Energy Consumption and Exergy Destruction [Volume 15, Issue 1, 2014, Pages 5-27]
-
Farzaneh-Gord, M.
Fuel Consumption Minimization in Greenhouses by Employing an Innovative System Taking Advantage of Solar and Geothermal Energies [Volume 15, Issue 2, 2014, Pages 91-115]
-
Farzaneh-Gord, Mahmood
Dynamic Modelling of a Compressed Air Energy Storage System in a Grid Connected Photovoltaic Plant [Volume 16, Issue 1, 2015, Pages 29-51]
-
Fattahi Avati, A.
Theoretical Study of Effective Parameters in the Friction Reduction by Ultrasonic Vibrations in Solid Surfaces [Volume 23, Issue 2, 2022, Pages 129-144]
-
Fattahi Avati, Ali
Experimental Study of Parameters Affecting Friction Reduction in Solid-Liquid Interfaces using Ultrasonic Vibrations [Volume 24, Issue 1, 2023, Pages 85-98]
-
Fereidoonnezhad, B.
A fiber-reinforced Transversely Isotropic Constitutive Model for Liver Tissue [Volume 14, Issue 2, 2013, Pages 88-97]
-
Fooladi-Mahani, M.
Optimizing the Characteristics of the Motion of Steel Balls and their Impact on Shell Liners in SAG Mills [Volume 10, Issue 1, 2009, Pages 5-22]
-
Fouladi, N.
One Dimensional Internal Ballistics Simulation of Solid Rocket Motor [Volume 14, Issue 1, 2013, Pages 5-16]
G
-
Garousi, Morteza
Simultaneous estimation of heat fluxes applied to the wall of a channel with turbulent flow using inverse analysis [Volume 20, Issue 2, 2019, Pages 42-74]
-
Ghadam, F.
New Correlations for the Prediction of Terminal Velocity and Drag Coefficient of a Bubble Rising [Volume 22, Issue 2, 2021, Pages 71-87]
-
Ghadamian, Hossein
Thermo-economic analysis of absorption chiller integrated with a GE-F5 gas turbine for power enhancement (Zanbagh power plant, studied case) [Volume 19, Issue 1, 2018, Pages 20-33]
-
Ghaffari, A.
Model Predictive Control System Design using ARMAX Identification Method for Car-following Behavior [Volume 14, Issue 1, 2013, Pages 48-71]
-
Ghaffari, A.
Modeling and Intelligent Control System Design for Overtaking Maneuver in Autonomous Vehicles [Volume 13, Issue 1, 2012, Pages 68-87]
-
Ghaffari, Ali
Model-based Approach for Multi-sensor Fault Identification in Power Plant Gas Turbines [Volume 21, Issue 1, 2020, Pages 65-86]
-
Ghaffari Some’e, H.
Calculating Stress Intensity Factor for Small Edge Radial Cracks on an Orthotropic Thick-walled Cylinder Subjected to Internal Pressure using the Average Stress [Volume 14, Issue 2, 2013, Pages 98-109]
-
Ghafori, H.
Experimental investigation of Convective Heat Transfer of Carbon Nanotubes / Water Flow in a helical Triple tube Heat Exchanger [Volume 22, Issue 2, 2021, Pages 106-115]
-
Ghasemi, Majid
Numerical Simulation of Blood Flow Mixed with Magnetic Nanoparticles under the Influence of AC and DC Magnetic Field [Volume 15, Issue 1, 2014, Pages 68-81]
-
Ghassemi, M.
Investigation of the Effects of Temperature, Mass Flow Rate of the Injected Fuel, Pore Diameter, Porosity and Ambient Pressure on the Amount of Pollutants in the Combustion Chamber [Volume 23, Issue 1, 2022, Pages 122-146]
-
Ghassemi, Majid
Investigating the Impact of Geometric Parameters on Radial Fan Performance [(Articles in Press)]
-
Ghazizadeh, H.
Modeling Diffusion to Thermal Wave Heat Propagation by Using Fractional Heat Conduction Constitutive Model [Volume 11, Issue 2, 2010, Pages 66-80]
-
Ghazizadeh, H. R.
Hybrid differential transform-finite difference solution of 2D transient nonlinear annular fin equation [Volume 11, Issue 1, 2010, Pages 5-20]
-
Ghezelbash, R.
Fuel Consumption Minimization in Greenhouses by Employing an Innovative System Taking Advantage of Solar and Geothermal Energies [Volume 15, Issue 2, 2014, Pages 91-115]
-
Gholipoor, Ahad
Comparative study of ultrasonic vibrations assisted EDM and magnetic field assisted EDM processes [Volume 21, Issue 1, 2020, Pages 45-64]
-
Ghorbanpour Arani, Ali
Vibration analysis of coupled double-nanocomposite microplate-systems [Volume 16, Issue 1, 2015, Pages 5-28]
-
Ghorbanpour Arani, Ali
Elasticity Solution Approach for Functionally Graded Spherical Shell with Piezoelectric Properties [Volume 18, Issue 1, 2017, Pages 103-123]
-
Ghotbinasab, Samira
Effects of Bronze Element Surface on Bubble Departure Size in Pool Boiling and its Prediction through ANN and GA Approaches [Volume 24, Issue 1, 2023, Pages 15-39]
H
-
Habibi, MohammadReza
Introduced a Modified Set of Boundary Condition of Lattice Boltzmann Method Based on Bennett extension in Presence of Buoyancy Term Considering Variable Diffusion Coefficients [Volume 18, Issue 2, 2017, Pages 5-22]
-
Hafezalkotob, A.
Thermomechanical Buckling of Simply Supported Shallow FGM Spherical Shells with Temperature dependent Material [Volume 11, Issue 2, 2010, Pages 39-65]
-
Haghaiegh, S.
Prediction of Surface Roughness by Hybrid Artificial Neural Network and Evolutionary Algorithms in End Milling [Volume 15, Issue 1, 2014, Pages 39-47]
-
Haghgoo, M. R.
Modeling of Upward Subcooled Flow Boiling of Refrigerant-113 in a Vertical Annulus [Volume 12, Issue 1, 2011, Pages 19-40]
-
Haghighat, H.
A generalized upper bound solution for bimetallic rod extrusion through arbitrarily curved dies [Volume 13, Issue 1, 2012, Pages 23-35]
-
Haghighat, Heshmat Allah
On the optimum die angle in rod drawing process considering strain-hardening effect of material [Volume 20, Issue 1, 2019, Pages 113-128]
-
Hajipour, A.
Comparison of Performances for Air-Standard Atkinson and Dual Combustion Cycles with Heat Transfer Considerations [Volume 13, Issue 2, 2012, Pages 5-19]
-
Hamedi, J.
Modeling and Wrench Feasible Workspace Analysis of a Cable Suspended Robot for Heavy Loads Handling [Volume 10, Issue 2, 2009, Pages 29-48]
-
Hamediestakhrsar, M.H.
Numerical Investigation of the Circumferential Angle of the Axisymmetric Bypass Dual Throat Nozzle [Volume 22, Issue 1, 2021, Pages 143-154]
-
Harifi, Abbas
Robust sliding mode control of uncertain nonlinear ship autopilot system [Volume 21, Issue 2, 2020]
-
Hasanlu, Mojtaba
Vibration Attenuation Timoshenko Beam Based on Optimal Placement Sensors/Actuators PZT Patches with LQR-MOPSO [Volume 17, Issue 1, 2016, Pages 26-60]
-
Hashemi, Seyyed Mohammad Moein
Transient Response of a Functionally Graded Piezoelectric Rectangular Plane with Multiple Cracks under Electromechanical Impacts [Volume 24, Issue 1, 2023, Pages 40-69]
-
Hashemi, SH.
Residual Stress Assessment in Spiral Steel Pipe with the Grade of API-X65 after Submerged Arc-welding [Volume 23, Issue 1, 2022, Pages 5-29]
-
Hashemi, Soheil
Nonlinear vibration analysis of functionally graded plate in contact with fluid: Analytical study [Volume 21, Issue 1, 2020, Pages 110-134]
-
Hashemi, Soheil
An analytical study for nonlinear vibration analysis of two-directional functionally graded rectangular plate [Volume 21, Issue 2, 2020]
-
Hassani, Alireza
Crack analysis of an orthotropic circular bars reinforced by a magnetic coating under Saint-Venant torsion [Volume 20, Issue 2, 2019, Pages 87-111]
-
Hatefkia, Atefeh
Mechanical and Thermal Stresses In a Linear Plastic FGM Hollow Cylinder Due to Axisymmetric Loads [Volume 16, Issue 2, 2015, Pages 39-65]
-
Heidari, Hamidreza
The effect of support parameters on the force transmissibility of a flexible rotor [Volume 20, Issue 2, 2019, Pages 28-41]
-
Heydari, P.
Evaluation and Simulation of Performance, Environmental and Economic Aspects of 1MW Photovoltaic Powerplant and Comparison with an Operational Powerplant [Volume 23, Issue 1, 2022, Pages 101-121]
-
Hormozi, Faramarz
Experimental Design by using Taguchi Method for Sensitivity Analysis of CuO/Deionized Water Nanofluid Properties [Volume 24, Issue 2, 2023, Pages 6-41]
-
Hosein Ali Poor, Seyed Mostafa
Parametric Study of Fuel Vapor Concentration Distribution Due to Vaporization of Fuel Droplets in Free Atmosphere [Volume 10, Issue 1, 2009, Pages 23-36]
-
Hosseinalipour, S. M.
Parametric Study of Fuel Vapor Concentration Distribution Due to Vaporization of Fuel Droplets in Free Atmosphere [Volume 10, Issue 1, 2009, Pages 23-36]
-
Hosseini Hashemi, Sh.
Low Velocity Impact on Relatively Thick Rectangular Plate under In-plane Loads Resting on Pasternak Elastic Foundation [Volume 12, Issue 1, 2011, Pages 41-67]
J
-
Jabbari, M.
An Exact Solution for Quasi-Static Poro-Thermoelasticity in Spherical Coordin [Volume 12, Issue 1, 2011, Pages 86-108]
-
Jabbari, M.
Mechanical Buckling of FG Saturated Porous Rectangular Plate with Piezoelectric Actuators [Volume 17, Issue 2, 2016, Pages 46-66]
-
Jabbari, mohsen
Mechanical Buckling of FG Saturated Porous Rectangular Plate under Temperature Field [Volume 17, Issue 1, 2016, Pages 61-78]
-
Jabbari, mohsen
Hollow Piezoelectric Cylinder under Transient Loads [Volume 18, Issue 2, 2017, Pages 23-38]
-
Jabbari, Mohsen
Mechanical and Thermal Stresses In a Linear Plastic FGM Hollow Cylinder Due to Axisymmetric Loads [Volume 16, Issue 2, 2015, Pages 39-65]
-
Jafari, A. A.
Nonlinear Vibration of Functionally Graded Cylindrical Shells under Radial Harmonic Load [Volume 13, Issue 2, 2012, Pages 20-34]
-
Jafari, Ali Asghar
Vibration analysis of a rectangular composite plate in contact with fluid [Volume 17, Issue 2, 2016, Pages 67-83]
-
Jafari, Ali Asghar
Nonlinear vibration analysis of functionally graded plate in contact with fluid: Analytical study [Volume 21, Issue 1, 2020, Pages 110-134]
-
Jafari, Ali Asghar
An analytical study for nonlinear vibration analysis of two-directional functionally graded rectangular plate [Volume 21, Issue 2, 2020]
-
Jafari, Peymaan
Wheelchair stabilization by the control of a spatial 3-RRS mechanism [Volume 17, Issue 2, 2016, Pages 84-100]
-
Jafarnia Dabanloo, N.
Ionic Channel Blockage Effect on the Electromechanical Model of Human Gastric Wall Smooth Muscle Cells [Volume 23, Issue 2, 2022, Pages 33-47]
-
Jafarzadeh, A.
A shell superelement for mechanical analysis of cylindrical structures [Volume 22, Issue 1, 2021, Pages 90-107]
-
Jahdi, M.H.
Capturing of Shock Wave of Supersonic Flow over the Bump Channel with TVD, ACM and Jameson Methods [Volume 22, Issue 1, 2021, Pages 108-126]
-
Jahromi, M.
A Hybrid Method for Prediction of Lean Blow Out in a Turbine Engine Combustion Chamber [Volume 22, Issue 2, 2021, Pages 54-70]
-
Jaiyesimi, Lawrence
Transient Three-Dimensional Thermal Analysis of a Slab with internal heat generation and heated by a Point Moving Heat Source [Volume 18, Issue 1, 2017, Pages 43-64]
-
Jalili, F.
A New Modified Harmony Search Optimization Algorithm for Evaluating Airfoil Shape Parameterization Methods and Aerodynamic Optimization [Volume 23, Issue 2, 2022, Pages 80-104]
-
Javadi, M.
Effect of Selecting the Suitable Design on Production Costs of Pressure Vessels [Volume 23, Issue 2, 2022, Pages 48-62]
-
Javadi, Mehrdad
Wheelchair stabilization by the control of a spatial 3-RRS mechanism [Volume 17, Issue 2, 2016, Pages 84-100]
-
Javanbakht, Alireza
Bevel Pipe Inspection by Snake Robot [Volume 24, Issue 2, 2023, Pages 81-103]
-
Jayesimi, Lawrence Olumide
Analysis of squeezing flow of viscous fluid under the influence of slip and magnetic field: comparative studies of different approximate analytical methods [Volume 20, Issue 2, 2019, Pages 5-27]
K
-
Kabganian, M
Fuzzy Variable-Length Sliding Window Blockwise Least Square Algorithm with Application to Vehicle Heading Determination [Volume 9, Issue 2, 2020, Pages 59-79]
-
Kadkhodaei, M.
Experimental Study on the Magnetomechanical Characteristics of Ni-Mn-Ga Ferromagnetic Shape Memory Alloy Single Crystals [Volume 14, Issue 1, 2013, Pages 72-84]
-
Kadkhodayan, M.
A Closed-form Semi-analytical Elastic-Plastic Solution for Predicting the Onset of Flange Wrinkling in Deep-drawing of a Two-layered Circular Plate [Volume 14, Issue 2, 2013, Pages 5-36]
-
Kalhor, R.
Low Velocity Impact on Relatively Thick Rectangular Plate under In-plane Loads Resting on Pasternak Elastic Foundation [Volume 12, Issue 1, 2011, Pages 41-67]
-
Kamali, Ali
On the Corotational Beam Element Formulation in Large Deformation Analysis [Volume 19, Issue 2, 2018, Pages 94-115]
-
Kameli, P.
Experimental Study on the Magnetomechanical Characteristics of Ni-Mn-Ga Ferromagnetic Shape Memory Alloy Single Crystals [Volume 14, Issue 1, 2013, Pages 72-84]
-
Kamgar, S.
Emission Performance of a Diesel Engine Running on Biodiesel Fuel at Different Compression Ratios [Volume 15, Issue 1, 2014, Pages 82-98]
-
Karafi, Mohammad Reza
Experimental Study of Parameters Affecting Friction Reduction in Solid-Liquid Interfaces using Ultrasonic Vibrations [Volume 24, Issue 1, 2023, Pages 85-98]
-
Karafi, Mohammad Reza
Numerical Simulation of the Saline Water Electrolysis Process using Electromagnetic Waves [Volume 24, Issue 2, 2023, Pages 104-141]
-
Karafi, M.R.
Theoretical Study of Effective Parameters in the Friction Reduction by Ultrasonic Vibrations in Solid Surfaces [Volume 23, Issue 2, 2022, Pages 129-144]
-
Karamoozravari, Mohammad Reza
Elastoplastic Analysis of Rotating Disk of Variable Thickness Made of Functionally Graded Materials [Volume 24, Issue 1, 2023, Pages 99-118]
-
Karimi, S.
New Correlations for the Prediction of Terminal Velocity and Drag Coefficient of a Bubble Rising [Volume 22, Issue 2, 2021, Pages 71-87]
-
Kassa, Ephrem Zeleke
Design and Modification of One Arm Driven Manual Hemiplegic Wheelchair [Volume 19, Issue 1, 2018, Pages 63-78]
-
Kassaei, F.
Numerical Modeling and Analysis of the Performance of a Stepped Solar Still using Multi-phase Method [Volume 23, Issue 1, 2022, Pages 87-100]
-
Keighobadi, J
Fuzzy Variable-Length Sliding Window Blockwise Least Square Algorithm with Application to Vehicle Heading Determination [Volume 9, Issue 2, 2020, Pages 59-79]
-
Kermanian, Ali
On the Corotational Beam Element Formulation in Large Deformation Analysis [Volume 19, Issue 2, 2018, Pages 94-115]
-
Keshavarz, Arash
An experimental study on effects of opening on buckling of FML plates reinforced with basalt [Volume 20, Issue 2, 2019, Pages 112-124]
-
Khakzari, Zohreh
Stabilization of Intrusive DMD based Reduced Order Model of the Convection-Diffusion Equations [(Articles in Press)]
-
Khalaj Amineh, S.
Improving the Surface Quality using Combined Ultrasonic Vibration and Magnetic Abrasive Finishing Method [Volume 14, Issue 2, 2013, Pages 37-49]
-
Khaleghi, Ali
Simultaneous estimation of heat fluxes applied to the wall of a channel with turbulent flow using inverse analysis [Volume 20, Issue 2, 2019, Pages 42-74]
-
Khalili, S. M. R.
Nonlinear Vibration of Functionally Graded Cylindrical Shells under Radial Harmonic Load [Volume 13, Issue 2, 2012, Pages 20-34]
-
Kharazmi, Mehdi
Low-dimensional Friction Modelling with Considering Random Asperity Distributions [Volume 24, Issue 1, 2023, Pages 119-140]
-
Kheiri Khah, Mohammad Mehdi
Optimization of fuzzy controller for an SMA-actuated artificial finger robot [Volume 21, Issue 1, 2020, Pages 135-149]
-
Kheirkhah, M. M.
Design, Fabrication and Intelligent Control of the Gripper Based on SMA Actuators [Volume 15, Issue 2, 2014, Pages 59-77]
-
Khodadadi, Mahdieh
Experimental investigation for wake of the circular cylinder by attaching different number of tripping wires [Volume 17, Issue 1, 2016, Pages 5-25]
-
Khodayari, A.
Design, Fabrication and Intelligent Control of the Gripper Based on SMA Actuators [Volume 15, Issue 2, 2014, Pages 59-77]
-
Khodayari, A. R.
Optimization of fuzzy controller for an SMA-actuated artificial finger robot [Volume 21, Issue 1, 2020, Pages 135-149]
-
Khodayari, Alireza
A New Model of Car Following Behavior Based on Lane Change Effects Using Anticipation and Evaluation Idea [Volume 16, Issue 2, 2015, Pages 26-38]
-
Khodayari, Alireza
Detection and Recognition of Multi-language Traffic Sign Context by Intelligent Driver Assistance Systems [Volume 20, Issue 2, 2019, Pages 125-136]
-
Khodayari, A. R.
Modeling and Intelligent Control System Design for Overtaking Maneuver in Autonomous Vehicles [Volume 13, Issue 1, 2012, Pages 68-87]
-
Khodayari, A.R.
Model Predictive Control System Design using ARMAX Identification Method for Car-following Behavior [Volume 14, Issue 1, 2013, Pages 48-71]
-
Khodsiani, Milad
Thermo-economic analysis of absorption chiller integrated with a GE-F5 gas turbine for power enhancement (Zanbagh power plant, studied case) [Volume 19, Issue 1, 2018, Pages 20-33]
-
Khooshehchin, Mohsen
Effects of Bronze Element Surface on Bubble Departure Size in Pool Boiling and its Prediction through ANN and GA Approaches [Volume 24, Issue 1, 2023, Pages 15-39]
-
Khoramdel, K.
Simulating Cooling Injection Effect of Trailing Edge of Gas Turbine Blade on Surface Mach Number Distribution of Blade [Volume 15, Issue 1, 2014, Pages 48-67]
-
Khoran, Eisa
Friction stir spot welding of polycarbonate by a new design tool [Volume 16, Issue 2, 2015, Pages 66-76]
-
Khoran, Mohammad
Friction stir spot welding of polycarbonate by a new design tool [Volume 16, Issue 2, 2015, Pages 66-76]
-
Khorasanizadeh, H.
Effect of Magnetic Field on Heat Transfer of Nanofluid with Variable Properties on the Inclined Enclosure [Volume 15, Issue 1, 2014, Pages 28-38]
-
Khorsand, M.
Thermo-elastic analysis of a functionally graded thick sphere by differential quadrature method [Volume 12, Issue 2, 2011, Pages 27-43]
-
Khorsandi, K.
Design and Implementation of a Control Device for Intelligent Wheelchair by Combining Image Processing and Acceleration Sensor [Volume 22, Issue 2, 2021, Pages 88-105]
-
KhorsandiJou, Mahdi
Wheelchair stabilization by the control of a spatial 3-RRS mechanism [Volume 17, Issue 2, 2016, Pages 84-100]
-
Khorshidvand, Ahmad reza
Free vibration analysis of functionally graded rectangular plates via differential quadrature method [Volume 20, Issue 1, 2019, Pages 46-70]
-
Kiani, Mohammad amin
Hollow Piezoelectric Cylinder under Transient Loads [Volume 18, Issue 2, 2017, Pages 23-38]
-
Kolahchi, Reza
Vibration analysis of coupled double-nanocomposite microplate-systems [Volume 16, Issue 1, 2015, Pages 5-28]
-
Koohi, R.
Rapid Subsonic Flutter Analysis for Low Aspect Ratio Composite Wings [Volume 23, Issue 1, 2022, Pages 68-86]
-
Kordbacheh, M.
Application of Wavelet Transform as a Signal Processing Method for Defect Detection using Lamb Waves: Experimental Verification [Volume 13, Issue 2, 2012, Pages 81-95]
-
Kouhi, E.
Experimental Investigation of the Flow Structure around a Pitching Airfoil by Mean and Instantaneous Data [Volume 23, Issue 2, 2022, Pages 5-32]
-
Kouhi, H.
Variable Structure Behavioural Controller for Multi-agent Systems [Volume 10, Issue 2, 2009, Pages 49-63]
-
Koury, R.
Proposing a Novel Configuration for CGSs Aimed at Reducing Energy Consumption and Exergy Destruction [Volume 15, Issue 1, 2014, Pages 5-27]
-
Koury, Ricardo N.N.
Dynamic Modelling of a Compressed Air Energy Storage System in a Grid Connected Photovoltaic Plant [Volume 16, Issue 1, 2015, Pages 29-51]
M
-
Maererfat, M.
Hybrid differential transform-finite difference solution of 2D transient nonlinear annular fin equation [Volume 11, Issue 1, 2010, Pages 5-20]
-
Mahbadi, H.
Calculating Stress Intensity Factor for Small Edge Radial Cracks on an Orthotropic Thick-walled Cylinder Subjected to Internal Pressure using the Average Stress [Volume 14, Issue 2, 2013, Pages 98-109]
-
Mahbadi, H.
Elastoplastic Analysis of Functionally Graded Beams under Mechanical Loads [Volume 13, Issue 2, 2012, Pages 35-58]
-
Mahbadi, H.
Stress Intensity Factor of Radial Cracks for Rotating Disks and Cylinders using Average Stress Method [Volume 13, Issue 1, 2012, Pages 88-103]
-
Mahbadi, H.
Mechanical Behaviour of Femoral Diaphyseal Cortical Bone using the Computed Tomography Data: A Numerical Investigation [Volume 22, Issue 2, 2021, Pages 5-20]
-
Mahbadi, Hossein
Cyclic Behavior of Beams Based on the Chaboche Unified Viscoplastic Model [Volume 18, Issue 2, 2017, Pages 63-81]
-
Mahbadi, Hossein
Effect of temperature on free vibration of functionally graded microbeams [Volume 19, Issue 1, 2018, Pages 5-19]
-
Mahdavi, E.
Linear Thermoplastic Analysis of FGM Rotating Discs with Variable Thickness [Volume 14, Issue 2, 2013, Pages 73-87]
-
Mahdavi, M.M.
On the optimum die angle in rod drawing process considering strain-hardening effect of material [Volume 20, Issue 1, 2019, Pages 113-128]
-
Mahdavy-Moghaddam, H.
Numerical Investigation of the Circumferential Angle of the Axisymmetric Bypass Dual Throat Nozzle [Volume 22, Issue 1, 2021, Pages 143-154]
-
Mahdi, Miralam
Numerical Study of the tongue geometry effects on the cavitation and performance of a centrifugal pump in off-design conditions [Volume 21, Issue 1, 2020, Pages 87-109]
-
Mahmoodi, M.
Simulating Cooling Injection Effect of Trailing Edge of Gas Turbine Blade on Surface Mach Number Distribution of Blade [Volume 15, Issue 1, 2014, Pages 48-67]
-
Mahmoodi, M.
Numerical Simulation of Beta Type Stirling Engine Considering Heat and Power Losses [Volume 15, Issue 2, 2014, Pages 5-27]
-
Mahmoudi, M.
Mechanical Behaviour of Femoral Diaphyseal Cortical Bone using the Computed Tomography Data: A Numerical Investigation [Volume 22, Issue 2, 2021, Pages 5-20]
-
Mahmoudi Monfared, Mojtaba
Analysis of Multiple Yoffe-type Moving Cracks in an Orthotropic Half-Plane under Mixed Mode Loading Condition [Volume 18, Issue 2, 2017, Pages 39-62]
-
Malek Jafarian, S.M.
Study of flow over bluff bodies using combination of FD-CVC methods [Volume 22, Issue 2, 2021, Pages 38-53]
-
MalekJafarian, S. M.
A New Modified Harmony Search Optimization Algorithm for Evaluating Airfoil Shape Parameterization Methods and Aerodynamic Optimization [Volume 23, Issue 2, 2022, Pages 80-104]
-
Mamouri, Amir Reza
Experimental investigation for wake of the circular cylinder by attaching different number of tripping wires [Volume 17, Issue 1, 2016, Pages 5-25]
-
Mamouri, Amir
Experimental Investigation of wake on an elliptic cylinder in the presence of tripping wire [Volume 18, Issue 1, 2017, Pages 81-102]
-
Mamouri, Amir Reza
Stability investigation of hydraulic interconnected suspension system of a vehicle with a quaternion neural network controller [Volume 20, Issue 1, 2019, Pages 129-151]
-
Mardani, Morteza
Modeling the Effects of Geometric Asymmetry on Aero-heating of the Ablative Noses [Volume 17, Issue 2, 2016, Pages 101-120]
-
Marefat, M.
Modeling Diffusion to Thermal Wave Heat Propagation by Using Fractional Heat Conduction Constitutive Model [Volume 11, Issue 2, 2010, Pages 66-80]
-
Maroofiazar, Rasool
Experimental Study on the Effect of Magnetic Field on Critical Heat Flux of Ferrofluid Flow Boiling in a Vertical Tube [Volume 19, Issue 2, 2018, Pages 116-126]
-
Masoumi, H.
A New Modified Harmony Search Optimization Algorithm for Evaluating Airfoil Shape Parameterization Methods and Aerodynamic Optimization [Volume 23, Issue 2, 2022, Pages 80-104]
-
Meghdari, A
Dynamic and Uncertainty Analysis of an Exoskeletal Robot to Assist Paraplegics Motion [Volume 9, Issue 2, 2020, Pages 6-25]
-
Mirabdolah Lavasani, Arash
The Exergy Optimization of a Flat-Plate Solar Collector Using AL2O3-Water, CuO-Water and TiO2-Water Nanofluids by Genetic Algorithm [Volume 17, Issue 2, 2016, Pages 5-18]
-
Mirabdolah Lavasani, Arash
Natural convection from horizontal noncircular annulus partially filled with porous sleeve [Volume 19, Issue 2, 2018, Pages 46-63]
-
Mirzaei, M.
Analytical Modeling of Axial Collapse of Circular Hybrid Tubes [Volume 12, Issue 2, 2011, Pages 44-53]
-
Mirzaei, M.
Multi-objective Optimization of Crashworthiness of Cylindrical Tubes as Energy Absorbers [Volume 12, Issue 1, 2011, Pages 5-18]
-
Mirzaei, Mehdi
Time Delay Estimation and PID Controller Design using Smith Predictor for Lever Arm Platform [Volume 24, Issue 2, 2023, Pages 142-156]
-
Mirzaie, Habib
Free and forced vibration behavior of cylinders made of two dimensional functionally graded materials using meshless method [Volume 21, Issue 2, 2020]
-
Moadel, Masoud
Interval-based Solar PV Power Forecasting Using MLP-NSGAII in Niroo Research Institute of Iran [Volume 18, Issue 2, 2017, Pages 82-94]
-
Moayyedi, Mohammad Kazem
Stabilization of Intrusive DMD based Reduced Order Model of the Convection-Diffusion Equations [(Articles in Press)]
-
Moayyedian, F.
A Closed-form Semi-analytical Elastic-Plastic Solution for Predicting the Onset of Flange Wrinkling in Deep-drawing of a Two-layered Circular Plate [Volume 14, Issue 2, 2013, Pages 5-36]
-
Modabberifar, M.
Numerical Study of Flow Field in New Design Cyclones with Different Vortex Finder Shapes [Volume 23, Issue 2, 2022, Pages 63-79]
-
Moeeni, H.
Effect of Selecting the Suitable Design on Production Costs of Pressure Vessels [Volume 23, Issue 2, 2022, Pages 48-62]
-
Moghadam, M. M.
The Johnson-cook Constitutive Equation for Compression Behavior of the New Piston Aluminum Alloys at High Temperatures [Volume 23, Issue 1, 2022, Pages 30-45]
-
Mohamadi, A.
Stability analysis of an axially moving thin wall conical shells made of shape memory alloy [Volume 23, Issue 2, 2022, Pages 105-128]
-
Mohammadi, A
Prediction of the Remaining useful Life of the Rolling Element Bearings using Recurrent Neural Network [Volume 21, Issue 2, 2020]
-
Mohammadi, A.
Improving the Surface Quality using Combined Ultrasonic Vibration and Magnetic Abrasive Finishing Method [Volume 14, Issue 2, 2013, Pages 37-49]
-
Mohammadi, Arash
Introduced a Modified Set of Boundary Condition of Lattice Boltzmann Method Based on Bennett extension in Presence of Buoyancy Term Considering Variable Diffusion Coefficients [Volume 18, Issue 2, 2017, Pages 5-22]
-
Mohammadi, M. R.
Numerical Simulation of Blood Flow Mixed with Magnetic Nanoparticles under the Influence of AC and DC Magnetic Field [Volume 15, Issue 1, 2014, Pages 68-81]
-
Mohammadidoust, Akbar
Effects of Bronze Element Surface on Bubble Departure Size in Pool Boiling and its Prediction through ANN and GA Approaches [Volume 24, Issue 1, 2023, Pages 15-39]
-
Mohammadpourfard, M.
Eulerian simulation of bubble columns reactors and effect of various parameters on the gas holdup [Volume 13, Issue 1, 2012, Pages 52-67]
-
Mohammadpourfard, Mousa
Experimental Study on the Effect of Magnetic Field on Critical Heat Flux of Ferrofluid Flow Boiling in a Vertical Tube [Volume 19, Issue 2, 2018, Pages 116-126]
-
Mohammadpourfard, Mousa
Comparative study of ultrasonic vibrations assisted EDM and magnetic field assisted EDM processes [Volume 21, Issue 1, 2020, Pages 45-64]
-
Moharrami, Rasoul
Numerical Study of the Effect of Materials’ Plastic Behavior on Equibiaxial Residual Stress Measurement Using Indentation [Volume 19, Issue 2, 2018, Pages 78-93]
-
Mohieddin Ghomshei, Mohammad Monsour
Free vibration analysis of thin annular plates integrated with piezoelectric layers using differential quadrature method [Volume 20, Issue 1, 2019, Pages 71-93]
-
Mohseni, M.
Study of flow over bluff bodies using combination of FD-CVC methods [Volume 22, Issue 2, 2021, Pages 38-53]
-
Mojahedin, A.
Mechanical Buckling of FG Saturated Porous Rectangular Plate with Piezoelectric Actuators [Volume 17, Issue 2, 2016, Pages 46-66]
-
Mojahedin, Arvin
Mechanical Buckling of FG Saturated Porous Rectangular Plate under Temperature Field [Volume 17, Issue 1, 2016, Pages 61-78]
-
Mojra, Afsaneh
Viscoelastic analysis of malignant breast tumors using fractional derivative model and in vitro test data [(Articles in Press)]
-
Mojtahedi, M.
The Johnson-cook Constitutive Equation for Compression Behavior of the New Piston Aluminum Alloys at High Temperatures [Volume 23, Issue 1, 2022, Pages 30-45]
-
Monfared, M. M.
Mixed Mode Fracture Analysis of Multiple Interface Cracks [Volume 15, Issue 2, 2014, Pages 78-90]
-
Monfared, M. M.
Multiple cracks in an elastic half-plane subjected to thermo-mechanical loading [Volume 17, Issue 2, 2016, Pages 19-45]
-
Monshizadeh, Arisa
Viscoelastic analysis of malignant breast tumors using fractional derivative model and in vitro test data [(Articles in Press)]
-
Montazerin, N
Effect of Volute and Rotor Widths on Squirrel Cage Fan Performance and Velocity Profiles [Volume 9, Issue 2, 2020, Pages 80-97]
-
Moradihaji, Kowsar
Investigating the Impact of Geometric Parameters on Radial Fan Performance [(Articles in Press)]
-
Mosadegh, P.
Improving the Surface Quality using Combined Ultrasonic Vibration and Magnetic Abrasive Finishing Method [Volume 14, Issue 2, 2013, Pages 37-49]
-
Mosayebi, M.
Rapid Subsonic Flutter Analysis for Low Aspect Ratio Composite Wings [Volume 23, Issue 1, 2022, Pages 68-86]
-
Moshir Stekhareh, S. Gh.
One Dimensional Internal Ballistics Simulation of Solid Rocket Motor [Volume 14, Issue 1, 2013, Pages 5-16]
-
Moslemi, Mohammadmahdi
Design and Development of an Emergency BVM-based Ventilator with 2D Look-up Table Control Algorithm [Volume 24, Issue 2, 2023, Pages 42-59]
-
Mostofizadeh, A. R.
One Dimensional Internal Ballistics Simulation of Solid Rocket Motor [Volume 14, Issue 1, 2013, Pages 5-16]
-
Mourad, Mohamed
Influence of Biodiesel from Egyptian Used Cooking Oils on Performance and Emissions of Diesel Engine [Volume 18, Issue 1, 2017, Pages 65-80]
-
Mousavi, Seyed Mahmoud
Multiple cracks in an elastic half-plane subjected to thermo-mechanical loading [Volume 17, Issue 2, 2016, Pages 19-45]
-
Mousavizade Noghabi, Seied Mostafa
Friction stir spot welding of polycarbonate by a new design tool [Volume 16, Issue 2, 2015, Pages 66-76]
N
-
Naderan Tahan, Khosro
The Effect of Repeated Impact Loading on Reservoir Rock Properties [Volume 21, Issue 2, 2020]
-
Naderan Tahan, Marzieh
The Effect of Repeated Impact Loading on Reservoir Rock Properties [Volume 21, Issue 2, 2020]
-
Nadjafi, M
Uncertainty Analysis of Spray Injection Process in a Model Scale Liquid Fuel Micro-Motor [Volume 21, Issue 2, 2020]
-
Naghdabadi, R.
A fiber-reinforced Transversely Isotropic Constitutive Model for Liver Tissue [Volume 14, Issue 2, 2013, Pages 88-97]
-
Nazari, F.
Investigation of welding parameters effects on residual stresses of resistance spot welding of AZ31 alloy [Volume 22, Issue 1, 2021, Pages 27-41]
-
Nazari, Mohsen
Simultaneous estimation of heat fluxes applied to the wall of a channel with turbulent flow using inverse analysis [Volume 20, Issue 2, 2019, Pages 42-74]
-
Nazari, Sajjad
Experimental Investigation of wake on an elliptic cylinder in the presence of tripping wire [Volume 18, Issue 1, 2017, Pages 81-102]
-
Nazaripoor, H.
Numerical Study of Flow Field in New Design Cyclones with Different Vortex Finder Shapes [Volume 23, Issue 2, 2022, Pages 63-79]
-
Nickmehr, N.
Some New Analytical Techniques for Duffing Oscillator with Very Strong Nonlinearity [Volume 10, Issue 1, 2009, Pages 37-54]
-
Nikbin, K.M.
Thermal Buckling of Functionally Graded Beams [Volume 10, Issue 2, 2009, Pages 65-81]
-
Nikkhah, M.
An Exact Elastodynamic Solution for Func-tionally Graded Thick-Walled Cylinders Subjected to Dynamic Pressures [Volume 10, Issue 1, 2009, Pages 56-75]
-
Niknami, A.
Coupled Thermoelasticity Impact Response Analysis of Composite Plates with SMA Wires in Thermal Environments [Volume 16, Issue 1, 2015, Pages 73-96]
-
Nikookar, Ali
Interval-based Solar PV Power Forecasting Using MLP-NSGAII in Niroo Research Institute of Iran [Volume 18, Issue 2, 2017, Pages 82-94]
-
Nourazar, Mahsa
Multiple moving cracks in an orthotropic strip sandwiched between two piezoelectric layers [Volume 16, Issue 1, 2015, Pages 97-113]
-
Nouri-Khajavi, M.
Model Predictive Control System Design using ARMAX Identification Method for Car-following Behavior [Volume 14, Issue 1, 2013, Pages 48-71]
O
-
Ojolo, Sunday
Nonlinear Analysis of Integrated Kinetics and Heat Transfer Models of Slow Pyrolysis of Biomass Particles using Differential Transformation Method [Volume 19, Issue 2, 2018, Pages 5-45]
-
Oloomi, S. A. A.
Effects of Temperature on Radiative Properties of Nanoscale Multilayer with Coherent Formulation in Visible Wavelengths [Volume 11, Issue 2, 2010, Pages 5-14]
-
Ommi, F
Uncertainty Analysis of Spray Injection Process in a Model Scale Liquid Fuel Micro-Motor [Volume 21, Issue 2, 2020]
-
Ommian, M.
Thermo-economic performance of an indirect hybrid system of solid oxide fuel cell and micro gas turbine [Volume 22, Issue 1, 2021, Pages 5-26]
-
Osheku, Charles
Nonlinear Analysis of Integrated Kinetics and Heat Transfer Models of Slow Pyrolysis of Biomass Particles using Differential Transformation Method [Volume 19, Issue 2, 2018, Pages 5-45]
-
Ozgoli, Hassan Ali
Thermo-economic analysis of absorption chiller integrated with a GE-F5 gas turbine for power enhancement (Zanbagh power plant, studied case) [Volume 19, Issue 1, 2018, Pages 20-33]
P
-
Pal, Pradip Kumar
Parametric optimization of cylindrical grinding process through hybrid Taguchi method and RSM approach using genetic algorithm [Volume 19, Issue 1, 2018, Pages 34-62]
-
Palangsavar, Nabiollah
Stability investigation of hydraulic interconnected suspension system of a vehicle with a quaternion neural network controller [Volume 20, Issue 1, 2019, Pages 129-151]
-
Pal Singh, Ajit
A Comparative Study on the use of Butyl Esters of Soyabean and Sunflower Oils as Biodiesel Fuel for Compression Ignition Engine [Volume 12, Issue 1, 2011, Pages 68-85]
-
Parhizkar, H.
Numerical Modeling and Analysis of the Performance of a Stepped Solar Still using Multi-phase Method [Volume 23, Issue 1, 2022, Pages 87-100]
-
Payan, Samira
Effect of Insulated Up and Down Lid Motion on the Heat Transfer of a Lid-Driven Cavity with an attached fin [Volume 19, Issue 1, 2018, Pages 99-126]
-
Payeganeh, Gholamhasan
Nonlinear Coupled Thermoelasticity of Functionally Graded Cylindrical Shells Resting on Elastic Foundation [Volume 24, Issue 2, 2023]
-
Pirkandi, J.
Simulating Cooling Injection Effect of Trailing Edge of Gas Turbine Blade on Surface Mach Number Distribution of Blade [Volume 15, Issue 1, 2014, Pages 48-67]
-
Pirkandi, J.
Numerical Simulation of Beta Type Stirling Engine Considering Heat and Power Losses [Volume 15, Issue 2, 2014, Pages 5-27]
-
Pirkandi, J.
Thermo-economic performance of an indirect hybrid system of solid oxide fuel cell and micro gas turbine [Volume 22, Issue 1, 2021, Pages 5-26]
-
Pirkandi, J.
A Hybrid Method for Prediction of Lean Blow Out in a Turbine Engine Combustion Chamber [Volume 22, Issue 2, 2021, Pages 54-70]
-
Pirkandi, J.
Numerical Modeling and Analysis of the Performance of a Stepped Solar Still using Multi-phase Method [Volume 23, Issue 1, 2022, Pages 87-100]
-
Poultangari, R.
Thermoelastic Analysis in Thick FGM Cylinders with Extended Profile [Volume 12, Issue 2, 2011, Pages 73-91]
-
Pourbagian, Mahdi
Investigating the Impact of Geometric Parameters on Radial Fan Performance [(Articles in Press)]
-
Pourrajabian, Abolfazl
Wind farm layout optimization using a Reynolds‐averaged Navier–Stokes model and a genetic algorithm [Volume 21, Issue 2, 2020]
Q
-
Qhafuri, Amir
Experimental Study on the Effect of Magnetic Field on Critical Heat Flux of Ferrofluid Flow Boiling in a Vertical Tube [Volume 19, Issue 2, 2018, Pages 116-126]
R
-
Rafatnia, Sadra
Time Delay Estimation and PID Controller Design using Smith Predictor for Lever Arm Platform [Volume 24, Issue 2, 2023, Pages 142-156]
-
Rafiee, Masoud
Effects of Bronze Element Surface on Bubble Departure Size in Pool Boiling and its Prediction through ANN and GA Approaches [Volume 24, Issue 1, 2023, Pages 15-39]
-
Rahgozar, Saeed
Wind farm layout optimization using a Reynolds‐averaged Navier–Stokes model and a genetic algorithm [Volume 21, Issue 2, 2020]
-
Rahi, Abbas
Multi-objective Optimization of Two-Layer Microbeam used for Sensing of Viruses by Genetic Algorithm [Volume 24, Issue 1, 2023, Pages 70-84]
-
Rahmanei, Hamid
Vibration analysis of a rectangular composite plate in contact with fluid [Volume 17, Issue 2, 2016, Pages 67-83]
-
Rahmani, O.
Multiple Moving Cracks in a Nonhomogeneous Orthotropic Strip [Volume 14, Issue 1, 2013, Pages 17-32]
-
Rahmani Hanzaki, A.
Stability analysis of an axially moving thin wall conical shells made of shape memory alloy [Volume 23, Issue 2, 2022, Pages 105-128]
-
Rahmanpour, Morteza
Wind farm layout optimization using a Reynolds‐averaged Navier–Stokes model and a genetic algorithm [Volume 21, Issue 2, 2020]
-
Raissi, S.
Effect of Selecting the Suitable Design on Production Costs of Pressure Vessels [Volume 23, Issue 2, 2022, Pages 48-62]
-
Rajabi, M.
Residual Stress Assessment in Spiral Steel Pipe with the Grade of API-X65 after Submerged Arc-welding [Volume 23, Issue 1, 2022, Pages 5-29]
-
Ranamaye Lashkami, Fahime
Experimental Design by using Taguchi Method for Sensitivity Analysis of CuO/Deionized Water Nanofluid Properties [Volume 24, Issue 2, 2023, Pages 6-41]
-
Rasaee, S.
The Johnson-cook Constitutive Equation for Compression Behavior of the New Piston Aluminum Alloys at High Temperatures [Volume 23, Issue 1, 2022, Pages 30-45]
-
Rasam, Amin
Subgrid-scale flux modeling of a passive scalar in turbulent channel flow using artificial neural network [(Articles in Press)]
-
Rasekh, Mohamad
Numerical Study of the tongue geometry effects on the cavitation and performance of a centrifugal pump in off-design conditions [Volume 21, Issue 1, 2020, Pages 87-109]
-
Rashidi, Farzan
Optimizing Design of Stand-alone Hybrid Solar Micro-CHP Systems Using LUS Based Particle Swarm Optimization Algorithm [Volume 21, Issue 1, 2020, Pages 5-20]
-
Rashidi, Farzan
Robust sliding mode control of uncertain nonlinear ship autopilot system [Volume 21, Issue 2, 2020]
-
Rashidi, Halimeh
Optimizing Design of Stand-alone Hybrid Solar Micro-CHP Systems Using LUS Based Particle Swarm Optimization Algorithm [Volume 21, Issue 1, 2020, Pages 5-20]
-
Rashidi, M. M.
Comparison of Performances for Air-Standard Atkinson and Dual Combustion Cycles with Heat Transfer Considerations [Volume 13, Issue 2, 2012, Pages 5-19]
-
Razavi, S. E.
An Enhanced Flux Treatment in Solving Incompressible Flow in a Forward-Facing Step [Volume 11, Issue 1, 2010, Pages 34-44]
-
Rezaei, Masoud
Mechanical Buckling of FG Saturated Porous Rectangular Plate under Temperature Field [Volume 17, Issue 1, 2016, Pages 61-78]
-
Rezaei, Masoud
Mechanical Buckling of FG Saturated Porous Rectangular Plate with Piezoelectric Actuators [Volume 17, Issue 2, 2016, Pages 46-66]
-
Rezaeian, J.
Prediction of Surface Roughness by Hybrid Artificial Neural Network and Evolutionary Algorithms in End Milling [Volume 15, Issue 1, 2014, Pages 39-47]
-
Rezaei Niya, S.M
Effect of Volute and Rotor Widths on Squirrel Cage Fan Performance and Velocity Profiles [Volume 9, Issue 2, 2020, Pages 80-97]
-
Roshanian, J
Nonlinear Non-minimum Phase Flight Vehicle Control Using Dynamic Sliding Manifold [Volume 9, Issue 2, 2020, Pages 42-58]
-
Rudrapati, Ramesh
Parametric optimization of cylindrical grinding process through hybrid Taguchi method and RSM approach using genetic algorithm [Volume 19, Issue 1, 2018, Pages 34-62]
S
-
Sabetghadam-Isfahani, Armin
Friction-Stir-Processing Effect on Fracture Toughness of Oil Pipelines in ST 37 Group Before/After Nano ZrO2-Coating [Volume 17, Issue 1, 2016, Pages 79-95]
-
Saboonchi, A.
Effects of Temperature on Radiative Properties of Nanoscale Multilayer with Coherent Formulation in Visible Wavelengths [Volume 11, Issue 2, 2010, Pages 5-14]
-
Sadati, H.
Modeling and Intelligent Control System Design for Overtaking Maneuver in Autonomous Vehicles [Volume 13, Issue 1, 2012, Pages 68-87]
-
Sadedel, Majid
Design and Development of an Emergency BVM-based Ventilator with 2D Look-up Table Control Algorithm [Volume 24, Issue 2, 2023, Pages 42-59]
-
Sadedel, Majid
Bevel Pipe Inspection by Snake Robot [Volume 24, Issue 2, 2023, Pages 81-103]
-
Sadighi, M.
Analytical Modeling of Axial Collapse of Circular Hybrid Tubes [Volume 12, Issue 2, 2011, Pages 44-53]
-
Sadighi, M.
Multi-objective Optimization of Crashworthiness of Cylindrical Tubes as Energy Absorbers [Volume 12, Issue 1, 2011, Pages 5-18]
-
Saedghi, Mohammad Hosein
Numerical Simulation of the Saline Water Electrolysis Process using Electromagnetic Waves [Volume 24, Issue 2, 2023, Pages 104-141]
-
Safarpour, Hamed
Vibration analysis of a double layer microshell utilizing a modified couple stress theory [Volume 21, Issue 1, 2020, Pages 21-44]
-
Safarpour, Pedram
Buckling and static analyses of functionally graded saturated porous thick beam resting on elastic foundation based on higher order beam theory [Volume 20, Issue 1, 2019, Pages 94-112]
-
Safarpour, Pedram
The effect of support parameters on the force transmissibility of a flexible rotor [Volume 20, Issue 2, 2019, Pages 28-41]
-
Safavinejad, A.
A New Modified Harmony Search Optimization Algorithm for Evaluating Airfoil Shape Parameterization Methods and Aerodynamic Optimization [Volume 23, Issue 2, 2022, Pages 80-104]
-
Saffar, S.
Enhancement of sound absorber by multi-area Helmholtz resonators array based on Fibonacci sequence [Volume 22, Issue 1, 2021, Pages 54-73]
-
Saffar, S.
Investigation and Comparison of Three Popular Ultrasonic Generators (PZT, PVDFEMFi) for Employing in Acoustic Scaling [Volume 22, Issue 2, 2021, Pages 21-37]
-
Safikhani, H.
Numerical Study of Flow Field in New Design Cyclones with Different Vortex Finder Shapes [Volume 23, Issue 2, 2022, Pages 63-79]
-
Sajjadi, Vahid
Numerical Study of the tongue geometry effects on the cavitation and performance of a centrifugal pump in off-design conditions [Volume 21, Issue 1, 2020, Pages 87-109]
-
Saleh, M. S.
Application of Wavelet Transform as a Signal Processing Method for Defect Detection using Lamb Waves: Experimental Verification [Volume 13, Issue 2, 2012, Pages 81-95]
-
Salehi, M.
Mechanical Behaviour of Femoral Diaphyseal Cortical Bone using the Computed Tomography Data: A Numerical Investigation [Volume 22, Issue 2, 2021, Pages 5-20]
-
Salehi, Sina
Design and Development of an Emergency BVM-based Ventilator with 2D Look-up Table Control Algorithm [Volume 24, Issue 2, 2023, Pages 42-59]
-
Salehinia, S.
Model Predictive Control System Design using ARMAX Identification Method for Car-following Behavior [Volume 14, Issue 1, 2013, Pages 48-71]
-
Salehnia, S.
Design, Fabrication and Intelligent Control of the Gripper Based on SMA Actuators [Volume 15, Issue 2, 2014, Pages 59-77]
-
Saviz, MohammadReza
Elasticity Solution Approach for Functionally Graded Spherical Shell with Piezoelectric Properties [Volume 18, Issue 1, 2017, Pages 103-123]
-
Sedaghat, S.
Effects of Temperature on Radiative Properties of Nanoscale Multilayer with Coherent Formulation in Visible Wavelengths [Volume 11, Issue 2, 2010, Pages 5-14]
-
Sedighi, M.
Investigation of welding parameters effects on residual stresses of resistance spot welding of AZ31 alloy [Volume 22, Issue 1, 2021, Pages 27-41]
-
Sedighi, Mohammd reza
Three-Dimensional Elasticity Solution of Single Layer Piezoelectric Panel [Volume 9, Issue 2, 2020, Pages 26-40]
-
Selk Ghafari, A
Dynamic and Uncertainty Analysis of an Exoskeletal Robot to Assist Paraplegics Motion [Volume 9, Issue 2, 2020, Pages 6-25]
-
Seyedi, S. E.
Multi-objective Optimization of Crashworthiness of Cylindrical Tubes as Energy Absorbers [Volume 12, Issue 1, 2011, Pages 5-18]
-
Seyed Roknizadeh, Seyed AliReza
Free and forced vibration behavior of cylinders made of two dimensional functionally graded materials using meshless method [Volume 21, Issue 2, 2020]
-
Shabgard, Mohammad Reza
Comparative study of ultrasonic vibrations assisted EDM and magnetic field assisted EDM processes [Volume 21, Issue 1, 2020, Pages 45-64]
-
Shadkami, M.
Vibrational Analysis of Cables Using the Non Standard Finite Difference Method [Volume 22, Issue 1, 2021, Pages 74-89]
-
Shafiee, M.
New Correlations for the Prediction of Terminal Velocity and Drag Coefficient of a Bubble Rising [Volume 22, Issue 2, 2021, Pages 71-87]
-
Shahabinejad, Esmaeil
Vibration analysis of a double layer microshell utilizing a modified couple stress theory [Volume 21, Issue 1, 2020, Pages 21-44]
-
Shahgholi, M.
Stability analysis of an axially moving thin wall conical shells made of shape memory alloy [Volume 23, Issue 2, 2022, Pages 105-128]
-
Shahgholi, Majid
Nonlinear Coupled Thermoelasticity of Functionally Graded Cylindrical Shells Resting on Elastic Foundation [Volume 24, Issue 2, 2023]
-
Shahi, T.
Fuel Consumption Minimization in Greenhouses by Employing an Innovative System Taking Advantage of Solar and Geothermal Energies [Volume 15, Issue 2, 2014, Pages 91-115]
-
Shahidian, Azadeh
Numerical Simulation of Blood Flow Mixed with Magnetic Nanoparticles under the Influence of AC and DC Magnetic Field [Volume 15, Issue 1, 2014, Pages 68-81]
-
Shahriari, Behrooz
Elastoplastic Analysis of Rotating Disk of Variable Thickness Made of Functionally Graded Materials [Volume 24, Issue 1, 2023, Pages 99-118]
-
Shahsiah, R.
A General Form Solution for Elastic Buckling of Thin Cylinders Made of FGM under Axial Loading [Volume 12, Issue 2, 2011, Pages 6-26]
-
Shahsiah, R.
Thermal Buckling of Functionally Graded Beams [Volume 10, Issue 2, 2009, Pages 65-81]
-
Shakeri, M
Three-Dimensional Elasticity Solution of Single Layer Piezoelectric Panel [Volume 9, Issue 2, 2020, Pages 26-40]
-
Shakeri, M.
Analytical Modeling of Axial Collapse of Circular Hybrid Tubes [Volume 12, Issue 2, 2011, Pages 44-53]
-
Shakeri, M.
Multi-objective Optimization of Crashworthiness of Cylindrical Tubes as Energy Absorbers [Volume 12, Issue 1, 2011, Pages 5-18]
-
Sharifi, Mohammad Hossein
Friction-Stir-Processing Effect on Fracture Toughness of Oil Pipelines in ST 37 Group Before/After Nano ZrO2-Coating [Volume 17, Issue 1, 2016, Pages 79-95]
-
Shariyat, M.
An Analytical Shear Factor for FGM Circular Plates with Non-uniform Elastic Foundations and Normal and Shear Tractions [Volume 14, Issue 2, 2013, Pages 50-72]
-
Shariyat, M.
A Differential Transform Approach for Modal Analysis of Variable Thickness Two-directional FGM Circular Plates on Elastic Foundations [Volume 11, Issue 2, 2010, Pages 15-38]
-
Shariyat, M.
Non-Equilibruim Molecular Dynamics Simulation of Poiseuille Flow in a Nanochannel [Volume 11, Issue 1, 2010, Pages 21-33]
-
Shariyat, M.
Coupled Thermoelasticity Impact Response Analysis of Composite Plates with SMA Wires in Thermal Environments [Volume 16, Issue 1, 2015, Pages 73-96]
-
Sharyat, Mohammad
An Exact Elastodynamic Solution for Func-tionally Graded Thick-Walled Cylinders Subjected to Dynamic Pressures [Volume 10, Issue 1, 2009, Pages 56-75]
-
Sheikhzadeh, Gh. A.
Effect of Magnetic Field on Heat Transfer of Nanofluid with Variable Properties on the Inclined Enclosure [Volume 15, Issue 1, 2014, Pages 28-38]
-
Shirazi, Mehran
Subgrid-scale flux modeling of a passive scalar in turbulent channel flow using artificial neural network [(Articles in Press)]
-
Shokouhfar, Milad
Mechanical and Thermal Stresses In a Linear Plastic FGM Hollow Cylinder Due to Axisymmetric Loads [Volume 16, Issue 2, 2015, Pages 39-65]
-
Sobamowo, G. M.
Finite Difference Analysis of Transient Flow Analysis of Casson Magneto-nanofluid over a Vertical Porous Conical Plate under the Influence of Thermal Radiation [Volume 23, Issue 1, 2022, Pages 46-67]
-
Sobamowo, Gbeminiyi Musibau
Nonlinear Analysis of Flow-induced Vibration in Fluid-conveying Structures using Differential Transformation Method with Cosine-Aftertreatment Technique [Volume 18, Issue 1, 2017, Pages 5-42]
-
Sobamowo, Gbeminiyi Musibau
Transient Three-Dimensional Thermal Analysis of a Slab with internal heat generation and heated by a Point Moving Heat Source [Volume 18, Issue 1, 2017, Pages 43-64]
-
Sobamowo, Gbeminiyi
Nonlinear Analysis of Integrated Kinetics and Heat Transfer Models of Slow Pyrolysis of Biomass Particles using Differential Transformation Method [Volume 19, Issue 2, 2018, Pages 5-45]
-
Sobamowo, Gbeminiyi Musibau
Insight into the Boundary Layer Flows of Free Convection and Heat Transfer of Nanofluids over a Vertical Plate using Multi-Step Differential Transformation Method [Volume 20, Issue 1, 2019, Pages 5-45]
-
Sobamowo, Gbeminiyi Musibau
Analysis of squeezing flow of viscous fluid under the influence of slip and magnetic field: comparative studies of different approximate analytical methods [Volume 20, Issue 2, 2019, Pages 5-27]
-
Soheili, S.
Tuned Mass Dampers for Earthquake Vibrations of High-rise Buildings using Bee Colony Optimization Technique [Volume 13, Issue 1, 2012, Pages 36-51]
-
Soleyman, A.
One Dimensional Internal Ballistics Simulation of Solid Rocket Motor [Volume 14, Issue 1, 2013, Pages 5-16]
-
Soorgee, M. H.
Application of Wavelet Transform as a Signal Processing Method for Defect Detection using Lamb Waves: Experimental Verification [Volume 13, Issue 2, 2012, Pages 81-95]
-
Sourki, Reza
Multiple cracks in an elastic half-plane subjected to thermo-mechanical loading [Volume 17, Issue 2, 2016, Pages 19-45]
-
Sourki, Reza
Analysis of Multiple Yoffe-type Moving Cracks in an Orthotropic Half-Plane under Mixed Mode Loading Condition [Volume 18, Issue 2, 2017, Pages 39-62]
-
Sulieman, Abdurhaman
Design and Modification of One Arm Driven Manual Hemiplegic Wheelchair [Volume 19, Issue 1, 2018, Pages 63-78]
T
-
Tabatabai Ghomsheh, F.
Ionic Channel Blockage Effect on the Electromechanical Model of Human Gastric Wall Smooth Muscle Cells [Volume 23, Issue 2, 2022, Pages 33-47]
-
Taghadosi, H.
Ionic Channel Blockage Effect on the Electromechanical Model of Human Gastric Wall Smooth Muscle Cells [Volume 23, Issue 2, 2022, Pages 33-47]
-
Taghvaeipour, A.
A shell superelement for mechanical analysis of cylindrical structures [Volume 22, Issue 1, 2021, Pages 90-107]
-
Taghvaeipour, Afshin
On the Corotational Beam Element Formulation in Large Deformation Analysis [Volume 19, Issue 2, 2018, Pages 94-115]
-
Tahani, Masoud
Investigating the Influence of Piezoelectric Excitation on the Veering Phenomenon Associated with Electrostatically Coupled Micro-beams [Volume 24, Issue 2, 2023, Pages 60-80]
-
Taheri, A.
Prediction of Surface Roughness by Hybrid Artificial Neural Network and Evolutionary Algorithms in End Milling [Volume 15, Issue 1, 2014, Pages 39-47]
-
Talebi, M.
Experimental investigation of Convective Heat Transfer of Carbon Nanotubes / Water Flow in a helical Triple tube Heat Exchanger [Volume 22, Issue 2, 2021, Pages 106-115]
-
Talley, Mohammad
Free vibration analysis of functionally graded rectangular plates via differential quadrature method [Volume 20, Issue 1, 2019, Pages 46-70]
-
Tamiru, Bethelhem
Design and Modification of One Arm Driven Manual Hemiplegic Wheelchair [Volume 19, Issue 1, 2018, Pages 63-78]
-
Tarahhomi, M. H.
Thermo-elastic analysis of a functionally graded thick sphere by differential quadrature method [Volume 12, Issue 2, 2011, Pages 27-43]
-
Tavakolian, M.
Nonlinear Vibration of Functionally Graded Cylindrical Shells under Radial Harmonic Load [Volume 13, Issue 2, 2012, Pages 20-34]
-
Torabi Rad, M.
Hybrid differential transform-finite difference solution of 2D transient nonlinear annular fin equation [Volume 11, Issue 1, 2010, Pages 5-20]
V
-
Vahidi, H.
Stability analysis of an axially moving thin wall conical shells made of shape memory alloy [Volume 23, Issue 2, 2022, Pages 105-128]
-
Varmazyar, Mostafa
Introduced a Modified Set of Boundary Condition of Lattice Boltzmann Method Based on Bennett extension in Presence of Buoyancy Term Considering Variable Diffusion Coefficients [Volume 18, Issue 2, 2017, Pages 5-22]
-
Vatankhahan, F.
Mechanical Behaviour of Femoral Diaphyseal Cortical Bone using the Computed Tomography Data: A Numerical Investigation [Volume 22, Issue 2, 2021, Pages 5-20]
-
Vossough, Hossein
Vibration analysis of coupled double-nanocomposite microplate-systems [Volume 16, Issue 1, 2015, Pages 5-28]
-
Vossoughi, G.R
Dynamic and Uncertainty Analysis of an Exoskeletal Robot to Assist Paraplegics Motion [Volume 9, Issue 2, 2020, Pages 6-25]
-
Vossoughi, G.R.
Variable Structure Behavioural Controller for Multi-agent Systems [Volume 10, Issue 2, 2009, Pages 49-63]
W
-
Waheed, Akindoye O
Transient Three-Dimensional Thermal Analysis of a Slab with internal heat generation and heated by a Point Moving Heat Source [Volume 18, Issue 1, 2017, Pages 43-64]
Y
-
Yadegari, M.
Capturing of Shock Wave of Supersonic Flow over the Bump Channel with TVD, ACM and Jameson Methods [Volume 22, Issue 1, 2021, Pages 108-126]
-
Yadegari, M.
Investigation of the Effects of Temperature, Mass Flow Rate of the Injected Fuel, Pore Diameter, Porosity and Ambient Pressure on the Amount of Pollutants in the Combustion Chamber [Volume 23, Issue 1, 2022, Pages 122-146]
-
Yaghoubi, Reza
Analysis of Multiple Yoffe-type Moving Cracks in an Orthotropic Half-Plane under Mixed Mode Loading Condition [Volume 18, Issue 2, 2017, Pages 39-62]
-
Yaghoubi, S.
Evaluation and Simulation of Performance, Environmental and Economic Aspects of 1MW Photovoltaic Powerplant and Comparison with an Operational Powerplant [Volume 23, Issue 1, 2022, Pages 101-121]
-
Yarmohammad Tooski, Mehdi
An experimental study on effects of opening on buckling of FML plates reinforced with basalt [Volume 20, Issue 2, 2019, Pages 112-124]
-
Yassi, Y.
Experimental Study of a High Speed Micro Waterwheel [Volume 14, Issue 1, 2013, Pages 33-47]
-
Yazdanpanah, M J
Fuzzy Variable-Length Sliding Window Blockwise Least Square Algorithm with Application to Vehicle Heading Determination [Volume 9, Issue 2, 2020, Pages 59-79]
-
Yimam, Abdurhaman
Design and Modification of One Arm Driven Manual Hemiplegic Wheelchair [Volume 19, Issue 1, 2018, Pages 63-78]
-
Yinusa, Ahmed Amao
Insight into the Boundary Layer Flows of Free Convection and Heat Transfer of Nanofluids over a Vertical Plate using Multi-Step Differential Transformation Method [Volume 20, Issue 1, 2019, Pages 5-45]
-
Yinusa,, Ahmed Amoo
Analysis of squeezing flow of viscous fluid under the influence of slip and magnetic field: comparative studies of different approximate analytical methods [Volume 20, Issue 2, 2019, Pages 5-27]
-
Yoosefi Koma, M. S.
Application of Wavelet Transform as a Signal Processing Method for Defect Detection using Lamb Waves: Experimental Verification [Volume 13, Issue 2, 2012, Pages 81-95]
-
Yousefi, Mehrdad
Detection and Recognition of Multi-language Traffic Sign Context by Intelligent Driver Assistance Systems [Volume 20, Issue 2, 2019, Pages 125-136]
-
Youssef, Ismail
Influence of Biodiesel from Egyptian Used Cooking Oils on Performance and Emissions of Diesel Engine [Volume 18, Issue 1, 2017, Pages 65-80]
Z
-
Zakeri, Manizhe
Low-dimensional Friction Modelling with Considering Random Asperity Distributions [Volume 24, Issue 1, 2023, Pages 119-140]
-
Zamzamian, Seyed Amir Hossein
Experimental Design by using Taguchi Method for Sensitivity Analysis of CuO/Deionized Water Nanofluid Properties [Volume 24, Issue 2, 2023, Pages 6-41]
-
Zanganeh, H.
The Lock-in Phenomenon in VIV using A Modified Wake Oscillator Model for both High and Low Mass-Damping Ratio [Volume 10, Issue 2, 2009, Pages 5-28]
-
Zangeneh, Sh.
The Johnson-cook Constitutive Equation for Compression Behavior of the New Piston Aluminum Alloys at High Temperatures [Volume 23, Issue 1, 2022, Pages 30-45]
-
Zarefar, B.
Design, Fabrication and Intelligent Control of the Gripper Based on SMA Actuators [Volume 15, Issue 2, 2014, Pages 59-77]
-
Zohoor, H.
Modeling and Wrench Feasible Workspace Analysis of a Cable Suspended Robot for Heavy Loads Handling [Volume 10, Issue 2, 2009, Pages 29-48]
Your query does not match with any item