Bevel Pipe Inspection by Snake Robot

Document Type : Research Paper

Authors

1 M.Sc., Student, Tarbiat Modares University, Department of Mechanical Engineering, Tehran, Iran

2 Assistant Professor, Tarbiat Modares University, Department of Mechanical Engineering, Tehran, Iran

Abstract

Investigation on snake robots for pipe inspection purposes has been the subject of various papers. In this paper, we explore a unique type of snake robot that utilizes spherical modules. Ensuring proper contact between the robot and the pipe walls is crucial for successful climbing. If the normal force is too low, the friction force will not be enough for the robot to ascend, while excessive normal force can increase energy consumption. Therefore, it's necessary to investigate the robot's ability to move on sloped surfaces to ensure its practicality. In this paper, we present a new method for adjusting the robot's behavior on different surface slopes, which has been instrumental in optimizing its locomotion on sloped surfaces. Additionally, we have tested a novel torque control method to avoid boundary condition violations with promising results. The results of simulations conducted in MATLAB and Simulink have been validated by comparing them to existing experimental data. The simulations indicate that an excessive value of parameters in the proposed method can increase the generated torque by up to 295%.

Keywords

Main Subjects

References

[1]        S. Hirose, "Biologically Inspired Robots," Snake-like Locomotors and Manipulators, 1993, https://lccn.loc.gov/92034986.
 
[2]        A. Crespi, A. Badertscher, A. Guignard, and A. J. Ijspeert, "Swimming and Crawling with an Amphibious Snake Robot," in Proceedings of the 2005 IEEE International Conference on Robotics and Automation, 2005: IEEE, pp. 3024-3028, https://doi.org/10.1109/ROBOT.2005.1570574.
 
[3]        S. A. Fjerdingen, P. Liljebäck, and A. A. Transeth, "A Snake-like Robot for Internal Inspection of Complex Pipe Structures (PIKo)," in 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2009: IEEE, pp. 5665-5671, https://doi.org/10.1109/IROS.2009.5354751.
[4]        B. Murugendran, A. A. Transeth, and S. A. Fjerdingen, "Modeling and Path-following for a Snake Robot with Active Wheels," In 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2009: IEEE, pp. 3643-3650, https://doi.org/10.1109/IROS.2009.5353886.
 
[5]        K. Mateja and W. Panfil, "Design of a Motion System for 3D Printed Snakebot," Technical Sciences, Vol. 24, pp. 57–66-57–66, 2021, https://doi.org/10.31648/ts.6820.
 
[6]        T. Lipták, I. Virgala, P. Frankovský, P. Šarga, A. Gmiterko, and L. Baločková, "A Geometric Approach to Modeling of Four-and Five-link Planar Snake-like Robot," International Journal of Advanced Robotic Systems, Vol. 13, No. 5, p. 1729881416663714, 2016, https://doi.org/10.1177/1729881416663714.
 
[7]        T. Lipták et al., "Modeling and Control of Two-link Snake," International Journal of Advanced Robotic Systems, Vol. 15, No. 2, p. 1729881418760638, 2018, https://doi.org/10.1177/1729881418760638.
 
[8]        T. Dear, B. Buchanan, R. Abrajan-Guerrero, S. D. Kelly, M. Travers, and H. Choset, "Locomotion of a Multi-link Non-holonomic Snake Robot with Passive Joints," The International Journal of Robotics Research, Vol. 39, No. 5, pp. 598-616, 2020, https://doi.org/10.1177/0278364919898503.
 
[9]        L. Chen, S. Ma, Y. Wang, B. Li, and D. Duan, "Design and Modelling of a Snake Robot in Traveling Wave Locomotion," Mechanism and Machine Theory, Vol. 42, No. 12, pp. 1632-1642, 2007, https://doi.org/10.1016/j.mechmachtheory.2006.12.003.
 
[10]      E. Prada et al., "New Approach of Fixation Possibilities Investigation for Snake Robot in the Pipe," In 2015 IEEE International Conference on Mechatronics and Automation (ICMA), 2015: IEEE, pp. 1204-1210, https://doi.org/10.1109/ICMA.2015.7237657.
 
[11]      I. Virgala et al., "Investigation of Snake Robot Locomotion Possibilities in a Pipe," Symmetry, Vol. 12, No. 6, p. 939, 2020, https://doi.org/10.3390/sym12060939.
 
[12]      M. J. Koopaee, S. Bal, C. Pretty, and X. Chen, "Design and Development of a Wheel-less Snake Robot with Active Stiffness Control for Adaptive Pedal Wave Locomotion," Journal of Bionic Engineering, Vol. 16, pp. 593-607, 2019, https://doi.org/10.1007/s42235-019-0048-x.
 
[13]      A. Selvarajan, A. Kumar, D. Sethu, and M. A. bin Ramlan, "Design and Development of a Snake-robot for Pipeline Inspection," in 2019 IEEE Student Conference on Research and Development (SCOReD), 2019: IEEE, pp. 237-242, https://doi.org/10.1109/SCORED.2019.8896254.
 
[14]      A. H. Chang and P. A. Vela, "Shape-centric Modeling for Control of Traveling Wave Rectilinear Locomotion on Snake-like Robots," Robotics and Autonomous Systems, Vol. 124, p. 103406, 2020, https://doi.org/10.1016/j.robot.2019.103406.
 
[15]      I. Virgala et al., "A Snake Robot for Locomotion in a Pipe using Trapezium-like Travelling Wave," Mechanism and Machine Theory, Vol. 158, p. 104221, 2021, https://doi.org/10.1016/j.mechmachtheory.2020.104221.
[16]      H. M. Kim et al., "An In-pipe Robot with Multi-axial Differential Gear Mechanism," In 2013 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2013: IEEE, pp. 252-257, https://doi.org/10.1109/IROS.2013.6696361.
 
[17]      S. Wakimoto, J. Nakajima, M. Takata, T. Kanda, and K. Suzumori, "A Micro Snake-like Robot for Small Pipe Inspection," In MHS2003. Proceedings of 2003 International Symposium on Micromechatronics and Human Science (IEEE Cat. No. 03TH8717), 2003: IEEE, pp. 303-308, https://doi.org/10.1109/MHS.2003.1249959.
 
[18]      H. Shin, K.-M. Jeong, and J.-J. Kwon, "Development of a Snake Robot Moving in a Small Diameter Pipe," In ICCAS 2010, 2010: IEEE, pp. 1826-1829, https://doi.org/10.1109/ICCAS.2010.5669881.
 
[19]      J. Whitman, N. Zevallos, M. Travers, and H. Choset, "Snake Robot Urban Search after the 2017 Mexico City Earthquake," In 2018 IEEE International Symposium on Safety, Security, and Rescue Robotics (SSRR), 2018: IEEE, pp. 1-6, https://doi.org/10.1109/SSRR.2018.8468633.
 
[20]      F. Trebuňa, I. Virgala, M. Pástor, T. Lipták, and Ľ. Miková, "An Inspection of Pipe by Snake Robot," International Journal of Advanced Robotic Systems, Vol. 13, No. 5, p. 1729881416663668, 2016, https://doi.org/10.1177/1729881416663668.
Iranian Journal of Mechanical Engineering Transactions of the ISME
Volume 24, Issue 2 - Serial Number 41
September 2023
Pages 81-103

Files

Share

How to cite

Statistics