Mechanical Buckling of FG Saturated Porous Rectangular Plate under Temperature Field

Jabbari, Mohsen; Rezaei, Masoud; Mojahedin, Arvin; Eslami, Mohammad Reza

Mechanical Buckling of FG Saturated Porous Rectangular Plate under Temperature Field

Document Type : Research Paper

Authors

¹ Islamic Azad University South Tehran Branch

² Department of Mechanical Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran

³ Mechanical Engineering Department, Amirkabir University of Technology, Tehran, 15914 Iran.

Abstract

In this study buckling analysis of solid rectangular plate made of porous material in undrained condition is investigated. The mechanical properties of plate are assumed to vary through the thickness direction. Distributing of the pores through the plate thickness are assumed to be the nonlinear nonsymmetric, nonlinear symmetric, and monotonous distribution. The effect of pores and pores distribution on critical buckling load of porous plate are studied. Effect of fluid compressibility on critical buckling load is investigated in the undrained condition. Also, effect of temperature on fluid compressibility for symmetric porous material plate, choosing a linear function, is examined. A Direct and analytical method is used for solving governing equations usin Fourier expansion method. The results obtained for porous plates are verified with the known data in literature.

Keywords

20.1001.1.16059727.2016.17.1.3.8

Main Subjects

Beams, plates and shells

References

[1] Biot, M.A., "Theory of Buckling of a Porous Slab and its Thermoelastic Analogy", J. Appl. Mech. ASME, Vol. 31, No. 2, pp. 194-198, (1964).

[2] Magnucki, K., and Stasiewicz, P., "Elastic Buckling of a Porous Beam", J. Theor Appl. Mech. Vol. 42, No. 4, pp. 859-868, (2004).

[3] Magnucki, K., Malinowski, M., and Kasprzak, J.," Bending and Buckling of a Rectangular Porous Plate", Steel Compos Struct, Vol. 6, No. 4, pp. 319-333, (2006).

[4] Magnucka-Blandzi, E., "Dynamic Stability of a Metal Foam Circular Plate", J. Theor Appl. Mech. Vol. 47, No. 2, pp. 421-433, (2009).

[5] Jasion, P., Magnucka-Blandzi, E., Szyc, W., and Magnucki, K., "Global and Local Buckling of Sandwich Circular and Beam-rectangular Plates with Metal Foam Core", Thin-Walled Struct, Vol. 61, pp. 154-161, (2012).

[6] Zimmerman, R.W., "Coupling in Poroelasticity and Thermoelasticity", Int. J. Rock Mech. Min Sci, Vol. 37, No. 1, pp. 79-87, (2000).

[7] Ghassemi, A., and Zhang, Q., "A Transient Fictitious Stress Boundary Element Method for Poro-thermoelastic Media", J. Eng Analysis with Boundary Elements, Vol. 28, No. 11, pp. 1363-1373, (2004).

[8] Ghassemi, A., "Stress and Pore Pressure Distribution around a Pressurized, Cooled Crack in Low Permeability Rock", Proceedings of the Thirty-Second Workshop on Geothermal Reservoir Engineering Stanford University, Stanford, California, USA, January, (2007).

[9] Jabbari, M., Mojahedin, A., Khorshidvand, A.R., and Eslami, M.R., "Buckling Analysis of Functionally Graded Thin Circular Plate made of Saturated Porous Materials", ASCE's J. Eng Mech, Vol. 140, pp. 287-295, (2013).

[10] Jabbari, M., Hashemitaheri, M., and Mojahedin, A., "Thermal Buckling Analysis of Functionally Graded Thin Circular Plate made of Saturated Porous Materials", J. Therm Stress, Vol. 37, pp. 202-220, (2014).

[11] Jabbari, M., Farzaneh Joubaneh, E., and Mojahedin, A., "Thermal Buckling Analysis of a Porous Circular Plate with Piezoelectric Actuators Based on First Order Shear Deformation Theory", Int. J. Mech Sci, Vol. 83, pp. 57-64, (2014).

[12] Farzaneh Joubaneh, E., Mojahedin, A., Khorshidvand, A.R., and Jabbari, M.," Thermal Buckling Analysis of Porous Circular Plate with Piezoelectric Sensor-actuator Layers under Uniform Thermal Load", J. Sandwich Struct Mater, Vol. 17, pp. 3-25, (2015).

[13] Mojahedin, A., Farzaneh Joubaneh, E., and Jabbari, M., "Thermal and Mechanical Stability of a Circular Porous Plate with Piezoelectric Actuators", Acta Mecanica, Vol. 83, pp. 57-64, (2014).

[14] Jabbari, M., Mojahedin, A., and Haghi, M., "Buckling Analysis of Thin Circular FG Plates Made of Saturated Porous-softferro Magnetic Materials in Transverse Magnetic Field", Thin-Walled Struct, Vol. 85, pp. 50-56, (2014).

[15] Kumar, R., Kumar, S., and Gourla, M.G., "Interaction Due to Expanding Surface Loads in Thermoporoelastic Medium", Mater Phys Mech, Vol. 21, pp. 126-134, (2014).

[16] Javaheri, R., and Eslami, M.R., "Buckling of Functionally Graded Plates under in-plane Compressive Loading", ZAMM, Vol. 82, pp. 277-283, (2002).

[17] Javaheri, R., Eslami, M.R., "Thermal Buckling of Functionally Graded Plates", AIAA J. Vol. 40, pp. 162-169, (2002).

[18] Javaheri, R., and Eslami, M.R., "Thermal Buckling of Functionally Graded Plates Based on Higher Order Theory", J. Therm. Stress, Vol. 25, No. 7, pp. 603-625, (2002).

[19] Lanhe, W., "Thermal Buckling of a Simply Supported Moderately Thick Rectangular FGM Plate", Compos Struct. Vol. 64, No. 2, pp. 211-218, (2004).

[20] Shariat, B.A.S., and Eslami, M.R., "Buckling of Thick Functionally Graded Plates under Mechanical and Thermal Loads", Compos Struct, Vol. 78, No. 3, pp. 433-439, (2007).

[21] Mohammadi, M., Saidi, A.R., and Jomehzadeh, E., "A Novel Analytical Approach for the Buckling Analysis of Moderately Thick Functionally Graded Rectangular Plates with Two Opposite Edges Simply Supported", Mech Eng Sci, Vol. 224, pp. 1831-1841, (2010).

[22] Mohammadi, M., Saidi, A.R., and Jomehzadeh, E., "Levy Solution for Buckling Analysis of Functionally Graded Rectangular Plates", Appl Compos Mater, Vol. 17, pp. 81-93, (2010).

[23] Bodaghi, M., and Saidi, A.R., "Levy-type Solution for Buckling Analysis of Thick Functionally Graded Rectangular Plates Based on the Higher-order Shear Deformation Plate Theory", Appl Math Model, Vol. 34, No. 11, pp. 3659-3673, (2010).

[24] Bodaghi, M., and Saidi, A.R., "Thermoelastic Buckling Behavior of Thick Functionally Graded Rectangular Plates", Arch Appl Mech, Vol. 81, No. 11, pp. 1555-1572, (2011).

[25] Bateni, M., Kiani, Y., and Eslami, M.R., "A Comprehensive Study on Stability of FGM Plates", Int. J. Mech Sci, Vol. 75, pp. 134-144, (2013).

[26] Behravan Rad, A., and Shariyat, M., "Three-dimensional Magneto-elastic Analysis of Asymmetric Variable Thickness Porous FGM Circular Plates with Non-uniform Tractions and Kerr Elastic Foundations", Compos Struct, Vol. 125, pp. 558-574, (2015).

[27] Swaminathan, K., Naveenkumar, D.T., Zenkour, A.M., and Carrera, E., "Stress, Vibration and Buckling Analyses of FGM Plates-A State-of-the-art Review", Compos Struct, Vol. 120, pp. 10-31, (2015).

[28] Chen, D., Yang, J., and Kitipornchai, S., "Elastic Buckling and Static Bending of Shear Deformable Functionally Graded Porous Beam", Compos Struct, Vol. 133, pp. 54–61, (2015).

[29] Chen, D., Yang, J., and Kitipornchai, S., "Free and Forced Vibrations of Shear Deformable Functionally Graded Porous Beams", Int. J. Mech Sci, Vol. 108-109, pp. 14–22, (2016).

[30] Brush, D.O., and Almroth, B.O., “Buckling of Bars, Plates and Shells”, McGraw-Hill, New York, USA, (1975).

[31] Wang, C.M., Reddy, J.N., and Lee, K.H., “Shear Deformable Beams and Plates: Relationships with Classical Solutions”, Oxford, Elsevier, (2000).

[32] Detournay, E., and Cheng, A.H.D., “Fundamentals of Poroelasticity”, Comprehensive Rock Engineering, Vol. 2, Pergamon Press, New York, USA, (1993).

[33] Eslami, M.R., “Thermo-Mechanical Buckling of Composite Plates and Shells”, Amirkabir University Press, Tehran, Iran, (2010).