Reviewer List (2022.04.01 up to 2023.04.01)
No. | First Name | Last Name | Position | Affiliation | Publons |
1 | Hadi | Abdolhai | Assistant Professor | Urmia University of Technology | |
2 | Ebrahim | Afshari | Associate Professor | University of Isfahan | https://publons.com/researcher/1683599/ebrahim-afshari/ |
3 | Isa | Ahmadi | Associate Professor | University of Zanjan | |
4 | Ali Akbar | Alemrajabi | Professor | Isfahan University of Technology | |
5 | Aria | Alesti | Professor | Sharif University of Technology | |
6 | Alireza | Arab | Assistant Professor | Vali e Asr University | |
7 | Mohammad | Arefi | Assistant Professor | Kashan University | |
8 | Hadi | Arvin | Associate Professor | Shahrekord University | |
9 | Bahman | Asadi | Assistant Professor | Golpayegan University | |
10 | Mohammad Reza | Asari | Assistant Professor | Shahid Chamran University of Ahvaz | |
11 | Nariman | Ashrafi Khorasani | Assistant Professor | Islamic Azad University, Science and Research Branch, Tehran | |
12 | Ali Asghar | Attayi | Assistant Professor | University of Tehran | |
13 | Reza | Azar Afza | Assistant Professor | Malek-Ashtar University of Technology | |
14 | Mohsen | Bahrami | Professor | Amirkabir University of Technology | |
15 | Hassan | Basirat Tabrizi | Professor | Amirkabir University of Technology | |
16 | Hsan | Biglari | Assistant Professor | University of Tabriz | https://publons.com/researcher/2203569/hasan-biglari/ |
17 | Ali | Chaibakhsh | Associate Professor | Faculty of Mechanical Engineering, University of Gilan | |
18 | Farzad | Cheraghpour | Assistant Professor | Department of Mechanical Engineering, Islamic Azad University | |
19 | Saeed | Daneshmand | Associate Professor | Department of Mechanical Engineering IAU Majlesi Branch Isfahan, Iran | |
20 | Mohammad Reza | Dashtbayazi | Associate Professor | Shahid Bahonar University of Kerman | |
21 | Davood | Domiri ganji | Professor | Mechanical Engineering Department, Babol University of Technology, Babol, Iran | https://publons.com/researcher/3132324/davood-domiri-ganji/ |
22 | Saeed | Ebrahimi | Assistant Professor | University of Yazd | |
23 | Vali | Enjileli | Assistant Professor | Aazad Karaj University | |
24 | Jafar | Eskandari Jam | Professor | Malek-Ashtar University of Technology | |
25 | Seyed Reza | Falahatgar | Assistant Professor | Guilan University | |
26 | Famida | Fallah Rajab Zadeh | Assistant Professor | Sharif University of Technology | |
27 | Shahriar | Fariborz | Professor | Amirkabir University of Technology | |
28 | Alireza | Fathi | Assistant Professor | Babol Noshirvani University of Technology | |
29 | Reza | Ghaderi | Assistant Professor | Azad Shahrekord University | |
30 | Esmaeal | Ghavanloo | Associate Professor | Shiraz University | |
31 | Saeed | Golabi | Associate Professor | Kashan University | |
32 | Nabard | Habibi | Assistant Professor | University of Kurdistan | |
33 | Mehdi | Hamzeie | Assistant Professor | Azad Ahvaz University | |
34 | Seyed Ali Asghar | Hosseini | Assistant Professor | Kharazmi University | |
35 | Hossein | Hosseini | Professor | Amirkabir University of Technology | |
36 | Abdolrahman | Jaamialahmadi | Assistant Professor | Ferdowsi University of Mashhad | |
37 | Ali | Jabbari | Assistant Professor | University of Arak | |
38 | Akbar | Jafari | Associate Professor | Technical and Vocational University | |
39 | Maziar | Janghorban | Assistant Professor | ||
40 | Koorosh | Javahezadeh | Assistant Professor | University of Gilan | https://publons.com/researcher/3865876/kourosh-javaherdeh/ |
41 | Jafar | Keighobadi | Professor | University of Tabriz | |
42 | Mahmood | Mani | Professor | Amirkabir University of Technology | |
43 | Karim | Mazaheri | Professor | Sharif University of Technology | |
44 | Arash | Mirabdolah Lavasani | Associate Professor | Islamic Azad University Centeral Tehran Branch | |
45 | Behnam | Miripour Fard | Assistant Professor | University of Guilan | |
46 | Mohammad Kazem | Moayyedi | Assistant Professor | Department of Mechanical Engineering, University of Qom | |
47 | Hamed | Mohades deylami | Associate Professor | University of Gilan | |
48 | Hamid | Mohammad Sedighi | Assistant Professor | Shahid Chamran University of Ahvaz | |
49 | Meysam | Mohammadi Amin | Assistant Professor | Aerospace Research Institute | |
50 | Hamid | Mohammadion | Assistant Professor | Azad University of Shahrood | |
51 | Saeed Reza | Moheb Poor | Assistant Professor | Persian Gulf University | |
52 | Hamed | Moradi | Assistant Professor | Sharif University of Technology | |
53 | Mostafa | Nasiri | Assistant Professor | Golpayegan University | |
54 | Alireza | Novin Zadeh | Assistant Professor | K.N Toosi University | |
55 | Amin | RabieZadeh | Assistant Professor | Islamic Azad University, Shiraz Branch | |
56 | Roham | Rafiee | Associate Professor | ||
57 | Mehdi | Raghebi | Assistant Professor | University of Birjand | |
58 | Seyed Hossein | Sadati | Assistant Professor | K.N Toosi University | |
59 | Farhad | Sadegh Moghanlou | Assistant Professor | Daneshgah Street, Ardabil, Iran | https://publons.com/researcher/3781410/farhad-sadegh-moghanlou/ |
60 | Hamed | Saeedi | Assistant Professor | Iran University of Science and Technology | |
61 | Sepehr | Sanaye | Professor | Iran University of Science and Technology | |
62 | Mohamaad Reza | Shah Nazari | Associate Professor | K.N Toosi University | |
63 | Mehdi | Sharif Niai | Assistant Professor | Aazad Semnan University | |
64 | Hamid Reza | Tabatabaie | Assistant Professor | Kashan University | |
65 | Alireza | Tahavor | Assistant Professor | Shiraz Azad University | |
66 | S.A. | Tajalli | |||
67 | Reza | Teymoori Falal | Associate Professor | University of Zanjan | |
68 | Mohammad Reza | Yazdi | Professor | University of Tehran | |
69 | Asghar | Zajkani | Assistant Professor | Imam Khomeini International University |
Reviewer Name | Specialty | Affiliation |
---|---|---|
Abbas Abbasi | Bio, Micro and Nano Mechanics, Conduction heat transfer, Heat transfer in micro and nano scale, Heat transfer in porous media, Thermodynamics and Heat Transfer | Amirkabir University of Technology |
Hadi Abdolhai | Bio, Micro and Nano Mechanics, Elastic and inelastic stress analysis, Manufacturing and Production, Nanomaterials, Solid Mechanics, Welding | Urmia University of Technology |
Seyed Mahmood Abolhasan Alavi | Behavior of cogeneration systems using lost energy, Bio, Micro and Nano Mechanics, Boundary layers, Combined cooling, heat and power generation systems, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Computational heat transfer, Conduction heat transfer, Energy and Environment, Exergy and thermoeconomic of thermal systems, Fluid flow analysis in micro and nano scale, Fluid Mechanics, Heating and cooling facilities, Heating, cooling and air-conditioning, Heat transfer in micro and nano scale, Laminar flows, Large scale vertices modelling, Non-Newtonian fluids, Thermal power plants, Thermodynamics and Heat Transfer, Turbomachinery, Turbulence flows and models, Water purifier | Aazad Mashhad University |
Mohammad Mehdi Aboo Torabi | Automation, Machining, Manufacturing and Production, Modern manufacturing methods, Rapid prototyping | University of Yazd |
Hamed Afrasyab | Dynamics, Vibration and Control, Elastic and inelastic stress analysis, Fluid and solid interaction, Fluid and structure interaction, Fluid Mechanics, Manufacturing and Production, Metal forming, Solid Mechanics | Babol Noshirvani University of Technology |
Hossein Afshar | Aerodynamics, Bio, Micro and Nano Mechanics, Boundary layers, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Computational heat transfer, Conduction heat transfer, Experimental fluid mechanics, Fluid Mechanics, Heat transfer in micro and nano scale, Hydrodynamics, Thermodynamics and Heat Transfer | East Tehran Branch, Islamic Azad University |
Isa Ahmadi | Beams, plates and shells, Computational and experimental methods in solid mechanics, Creep and fatigue analysis, Dynamics of multiple particle systems, Dynamics, Vibration and Control, Elastic and inelastic stress analysis, Impact and penetration problems, Impact mechanics, Modeling of dynamic systems, Nonclassical elasticity, Pressure vessel and piping, Smart and composite structures, Solid Mechanics, Structural mechanics, Thermoelasticity | University of Zanjan |
Hamid Ahmadian | Condition monitoring of structures, Dynamics, Vibration and Control, Measurment and callibration, Modeling of dynamic systems, Nonlinear vibration, Structural dynamics | Iran University of Science and Technology |
Seyed Yoosef Ahmadi Broughani | Acoustics, Beams, plates and shells, Bio, Micro and Nano Mechanics, Computational and experimental methods in solid mechanics, Computer aided design and manufacturing, Dynamics, Vibration and Control, Fracture mechanics, Manufacturing and Production, Material science, Metal forming, Modeling of dynamic systems, Nanomaterials, Nonlinear vibration, Perturbation and nonlinear dynamics, Solid Mechanics, Welding | University of Birjand |
Ghasem Akbari | Boundary layers, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Computational heat transfer, Conduction heat transfer, Experimental fluid mechanics, Fluid Mechanics, Laminar flows, Large scale vertices modelling, Methods of numerical and experimental data analysis, Rheometry, Thermodynamics and Heat Transfer, Transient flows, Turbomachinery, Turbulence flows and models | Azad Ghazvin University |
Nozar Akbari | Acoustics, Aerodynamics, Boundary layers, Chemical and phase equilibrium, Combustion and reaction flows, Compressible flows, Conduction heat transfer, Dynamics, Vibration and Control, Fluid Mechanics, Inverse heat transfer, Modern technologies in internal combustion engines, Radiative heat transfer, Thermodynamics and Heat Transfer, Transient flows, Turbomachinery, Vehicles and Transportations | Shahid Sattari University of Aeronautical Engineering |
Ali Akbar Alemrajabi | Energy and Environment, Fuel cells, Heat exchangers, Heat transfer enhancement, Optimization of energy consumption in buildings and industry, Renewable energies, Thermodynamics and Heat Transfer | Isfahan University of Technology |
Vali Ali Mirzaloo | Computer aided design and manufacturing, Machining, Manufacturing and Production, Metal forming, Modern manufacturing methods | Urmia University of Technology |
Ehsan Aman | Combustion and reaction flows, Fluid Mechanics, Large scale vertices modelling, Multiphase flows, Thermodynamics and Heat Transfer, Turbulence flows and models | Amirkabir University of Technology |
Mehran Ameri | Behavior of cogeneration systems using lost energy, Combined cooling, heat and power generation systems, Energy and Environment, Exergy and thermoeconomic of thermal systems, Heating and cooling facilities, Renewable energies, Thermal energy storage, Thermodynamics and Heat Transfer, Water purifier | Shahid Bahonar University of Kerman |
Mohammad Ameri | Combined cooling, heat and power generation systems, Combustion and air pollution, Condensation, evaporation and refrigeration, Conduction heat transfer, Energy and Environment, Exergy and thermoeconomic of thermal systems, Fuel cells, Global warming, Heat exchangers, Heat transfer in micro and nano scale, Mechanical Engineering Education and Globalization, Modern energy technologies, Modern technologies of energy, New thermodynamic cycles, Optimization of energy consumption in buildings and industry, Thermal energy storage, Thermal power plants, Thermodynamics and Heat Transfer, Water purifier | Shahid Beheshti University |
Reza Ansari | Beams, plates and shells, Bio, Micro and Nano Mechanics, Computational and experimental methods in solid mechanics, Dynamics, Vibration and Control, Intelligent structures, Mechanics in micro and nano scale, Multiscale analysis, Nonlinear vibration, Solid Mechanics | Guilan University |
Alireza Arab | Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Computational heat transfer, Conduction heat transfer, Exergy and thermoeconomic of thermal systems, Experimental fluid mechanics, Fluid Mechanics, Heat exchangers, Heat transfer enhancement, Heat transfer in porous media, Hydrodynamics, Laminar flows, New thermodynamic cycles, Radiative heat transfer, Thermodynamics and Heat Transfer, Thermodynamics of multiparticle systems, Turbulence flows and models | Vali e Asr University |
Mohammad Arefi | Beams, plates and shells, Elastic and inelastic stress analysis, Pressure vessel and piping, Smart and composite structures, Solid Mechanics, Thermoelasticity | Kashan University |
Hadi Arvin | Dynamics, Vibration and Control, Intelligent structures, Mechanical Engineering Education and Globalization, Nonlinear vibration, Perturbation and nonlinear dynamics, Structural dynamics | Shahrekord University |
Bahman Asadi | Aerodynamics and space propulsion, Compressible flows, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Computational heat transfer, Conduction heat transfer, Energy and Environment, Fluid and structure interaction, Fluid Mechanics, Heating, cooling and air-conditioning, Heat transfer enhancement, Laminar flows, Mass and heat transfer and phase change, Modern energy technologies, Multiphase flows, Thermal power plants, Thermodynamics and Heat Transfer, Turbomachinery, Turbulence flows and models, Vehicles and Transportations | Golpayegan University |
Hsan Asadi | Bio, Micro and Nano Mechanics, Boundary layers, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Elastic and inelastic stress analysis, Flow in porous media, Fluid flow analysis in micro and nano scale, Fluid Mechanics, Non-Newtonian fluids, Solid Mechanics, Structural mechanics, Transient flows | Guilan University |
Mohammad Reza Asari | Combustion and air pollution, Energy and Environment, Fuel cells, Heat exchangers, Heating, cooling and air-conditioning, Heat transfer enhancement, Mechanical Engineering Education and Globalization, Modern technologies of energy, Renewable energies, Thermal energy storage, Thermodynamics and Heat Transfer | Shahid Chamran University of Ahvaz |
Nariman Ashrafi Khorasani | Boundary layers, Fluid Mechanics, Laminar flows, Non-Newtonian fluids, Transient flows | Islamic Azad University, Science and Research Branch, Tehran |
Ali Asghar Attayi | Beams, plates and shells, Computational and experimental methods in solid mechanics, Design and control of robots and mechanisms, Dynamics, Vibration and Control, Elastic and inelastic stress analysis, Modeling of dynamic systems, Pressure vessel and piping, Solid Mechanics, Structural mechanics | University of Tehran |
Mojtaba Ayatollahi | Fracture mechanics | Zanjan University |
Reza Azar Afza | Aerospace materials and structures, Beams, plates and shells, Dynamics, Vibration and Control, Elastic and inelastic stress analysis, Modeling of dynamic systems, Pressure vessel and piping, Smart and composite structures, Solid Mechanics, Structural mechanics, Vehicles and Transportations | Malek-Ashtar University of Technology |
Ahmad Azari | Boundary layers, Compressible flows, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Computational heat transfer, Condensation, evaporation and refrigeration, Conduction heat transfer, Energy and Environment, Flow in porous media, Fluid Mechanics, Heat exchangers, Heat transfer enhancement, Heat transfer in porous media, Laminar flows, Mass and heat transfer and phase change, Multiphase flows, Radiative heat transfer, Renewable energies, Thermal energy storage, Thermodynamics and Heat Transfer, Turbulence flows and models, Water purifier | Persian Gulf University |
Hashem Babaei | Impact and penetration problems, Impact mechanics, Solid Mechanics | Guilan University |
Sima Baheri Eslami | Bio, Micro and Nano Mechanics, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Computational heat transfer, Fluid and heat transfer in biological tissues, Fluid flow analysis in micro and nano scale, Fluid Mechanics, Heat transfer enhancement, Heat transfer in micro and nano scale, Non-Newtonian fluids, Thermodynamics and Heat Transfer | University of Tabriz |
Gholam Hosein Baradarn | Beams, plates and shells, Bio, Micro and Nano Mechanics, Computational and experimental methods in solid mechanics, Elastic and inelastic stress analysis, Mechanics in micro and nano scale, Solid Mechanics | Shahid Bahonar University of Kerman |
Hamid Baseri | Automation, Machining, Manufacturing and Production, Modern manufacturing methods | Babol Noshirvani University of Technology |
Hassan Basirat Tabrizi | Bio, Micro and Nano Mechanics, Conduction heat transfer, Energy and Environment, Flow in porous media, Fluid and heat transfer in biological tissues, Fluid Mechanics, Heat transfer in porous media, Inverse heat transfer, Mass and heat transfer and phase change, Multiphase flows, Thermodynamics and Heat Transfer, Turbulence flows and models | Amirkabir University of Technology |
Seyed Mohammad Bozorg | Control of dynamic systems, Dynamics, Vibration and Control, Mechatronics, Vehicle dynamics, Vehicles and Transportations | University of Yazd |
Ali Chaibakhsh | Condition monitoring of structures, Dynamics, Vibration and Control, Intelligent control systems and soft computing methodologies, Process identification and control | Faculty of Mechanical Engineering, University of Gilan |
Farzad Cheraghpour | Design and control of robots and mechanisms | Department of Mechanical Engineering, Islamic Azad University |
Saeed Daneshmand | Computer aided design and manufacturing, Creep and fatigue analysis, Design and control of robots and mechanisms, Dynamics, Vibration and Control, Fracture mechanics, Intelligent structures, Machining, Manufacturing and Production, Metal forming, Modern manufacturing methods, Pressure vessel and piping, Rapid prototyping, Smart and composite structures, Solid Mechanics, Structural mechanics | Department of Mechanical Engineering IAU Majlesi Branch Isfahan, Iran |
Mohammad Reza Dashtbayazi | Bio, Micro and Nano Mechanics, Elastic and inelastic stress analysis, Manufacturing and Production, Material science, Mechanics in micro and nano scale, Nanomaterials, Solid Mechanics | Shahid Bahonar University of Kerman |
Ali Davar | Design and Reliability of Mechanical Systems, Optimization of mechanical systems, Solid Mechanics, Structural mechanics | Malek-Ashtar University of Technology |
Ali Akbar Dehghan | Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Energy and Environment, Exergy and thermoeconomic of thermal systems, Experimental fluid mechanics, Fluid Mechanics, Large scale vertices modelling, Noise reduction, Renewable energies, Thermodynamics and Heat Transfer | University of Yazd |
Mojtaba Dehghan Monshadi | Aerodynamics, Aerodynamics and space propulsion, Compressible flows, Energy and Environment, Exergy and thermoeconomic of thermal systems, Experimental fluid mechanics, Fluid Mechanics, Heating, cooling and air-conditioning, Hydrodynamics, Mechanical Engineering Education and Globalization, Methods of numerical and experimental data analysis, Modern technologies of energy, New thermodynamic cycles, Statistical thermodynamics, Thermodynamics and Heat Transfer, Turbulence flows and models, Vehicles and Transportations | Malek Ashtar University |
Farzad Ebrahimi | Bio, Micro and Nano Mechanics, Mechanics in micro and nano scale, Nonclassical elasticity, Solid Mechanics | Imam Khomeini International University |
Mohammad Ali Ehteram | Alternative fuels, Combustion and air pollution, Conduction heat transfer, Electric and hybrid vehicles, Energy and Environment, Engine lubrication and cooling, Experimental fluid mechanics, Fluid Mechanics, Fuel consumption and air pollution reduction methods for internal combustion engines, Heat transfer enhancement, Methods of numerical and experimental data analysis, Modern technologies in internal combustion engines, Multiphase flows, Thermodynamics and Heat Transfer, Vehicles and Transportations | QOM University of Technology |
Vali Enjileli | Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Computational heat transfer, Fluid Mechanics, Thermodynamics and Heat Transfer | Aazad Karaj University |
Hamid Erfan-Niya | Bio, Micro and Nano Mechanics, Chemical and phase equilibrium, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Computational heat transfer, Condensation, evaporation and refrigeration, Conduction heat transfer, Fluid flow analysis in micro and nano scale, Fluid Mechanics, Mass and heat transfer and phase change, Multiscale analysis, Nanomaterials, New thermodynamic cycles, Statistical thermodynamics, Thermodynamics and Heat Transfer, Thermodynamics of multiparticle systems | University of Tabriz |
Mohammad Reza Eslami | Beams, plates and shells, Computational and experimental methods in solid mechanics, Pressure vessel and piping, Smart and composite structures, Solid Mechanics, Thermoelasticity | Amirkabir University of Technology |
Reza Eslami Farsani | Fracture mechanics, Smart and composite structures, Solid Mechanics | K.N Toosi University |
Seyed Reza Falahatgar | Beams, plates and shells, Bio, Micro and Nano Mechanics, Computational and experimental methods in solid mechanics, Creep and fatigue analysis, Elastic and inelastic stress analysis, Fracture mechanics, Mechanics in micro and nano scale, Multiscale analysis, Smart and composite structures, Solid Mechanics | Guilan University |
Famida Fallah Rajab Zadeh | Aerospace materials and structures, Beams, plates and shells, Offshore structures, Pressure vessel and piping, Smart and composite structures, Solid Mechanics, Thermoelasticity, Vehicles and Transportations | Sharif University of Technology |
Mousa Farhadi | Experimental fluid mechanics, Fluid Mechanics, Heat transfer enhancement, Hydraulics, Large scale vertices modelling, Noise reduction, Thermodynamics and Heat Transfer, Turbomachinery, Turbulence flows and models | Babol Noshirvani University of Technology |
Shahriar Fariborz | Beams, plates and shells, Computational and experimental methods in solid mechanics, Creep and fatigue analysis, Elastic and inelastic stress analysis, Fracture mechanics, Impact mechanics, Nonclassical elasticity, Pressure vessel and piping, Smart and composite structures, Solid Mechanics, Structural mechanics, Thermoelasticity | Amirkabir University of Technology |
Mohammad Ali Farsi | Computer aided design and manufacturing, Design and Reliability of Mechanical Systems, Manufacturing and Production, Modern manufacturing methods, Optimization of mechanical systems, Safety and risk assessment of mechanical systems and products, Theoritical and experimental evaluation of reliability of mechanical elements | Iranian Space Research Center |
Jamshid Fazilati | Aerospace materials and structures, Beams, plates and shells, Computational and experimental methods in solid mechanics, Condition monitoring of structures, Dynamics of manned and unmanned vehicles, Dynamics, Vibration and Control, Elastic and inelastic stress analysis, Fluid and solid interaction, Fracture mechanics, Impact and penetration problems, Impact mechanics, Intelligent structures, Manufacturing and Production, Nondestructive testing, Nonlinear vibration, Smart and composite structures, Solid Mechanics, Space engineering and science, Structural dynamics, Structural mechanics, Vehicles and Transportations | Iranian Space Research Center |
Abdolhossein Fereydoon | Bio, Micro and Nano Mechanics, Design and Reliability of Mechanical Systems, Elastic and inelastic stress analysis, Mechanics in micro and nano scale, Nanomaterials, Nanomaterials and nanostructures for energy applications, Optimization of mechanical systems, Smart and composite structures, Solid Mechanics, Structural mechanics | Semnan University |
Bahar FiroozAbadi | Application of mechanical engineering in living organisms, Experimental fluid mechanics, Fluid Mechanics, Hydraulics, Hydrodynamics, Laminar flows, Multiscale analysis, Non-Newtonian fluids, Transient flows | Sharif University of Technology |
Ali Reza Fotuhi Firoozabad | Beams, plates and shells, Elastic and inelastic stress analysis, Fracture mechanics, Solid Mechanics, Thermoelasticity | University of Yazd |
Seyed Mehdi Ganjiani | Computational and experimental methods in solid mechanics, Elastic and inelastic stress analysis, Solid Mechanics | University of Tehran |
Reza Ghaderi | Bio, Micro and Nano Mechanics, Computational heat transfer, Dynamics and control of micro and nano mechanisms, Dynamics, Vibration and Control, Heat transfer enhancement, Mechanics in micro and nano scale, Modeling of dynamic systems, Multiscale analysis, Nonlinear vibration, Solid Mechanics, Thermodynamics and Heat Transfer | Azad Shahrekord University |
Ali Ghaffari | Automotive control systems, Bio, Micro and Nano Mechanics, Control of dynamic systems, Design and control of robots and mechanisms, Dynamics and control of micro and nano mechanisms, Dynamics of manned and unmanned vehicles, Dynamics of multiple particle systems, Dynamics, Vibration and Control, Engineering ethics and safety requirements, Innovation in curriculum, education and teaching methods, Intelligent control systems and soft computing methodologies, Measurment and callibration, Mechanical Engineering Education and Globalization, Mechatronics, Modeling of dynamic systems, Modern capabilities in modeling and simulation of digital and automation manufacturing, Modern technologies in internal combustion engines, Perturbation and nonlinear dynamics, Process identification and control, Suspension, steering and braking systems, Sustainable development in mechanical engineering, Vehicle dynamics, Vehicles and Transportations, Virtual training, models, technologies and globalization | K.N Toosi University |
Mehran Ghalami | ||
Jaafar Ghanbari | Bio, Micro and Nano Mechanics, Elastic and inelastic stress analysis, Mechanics in micro and nano scale, Solid Mechanics | Qom University of Technology |
Hsan Ghasemi | Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Fluid and structure interaction, Fluid Mechanics, Hydraulics, Turbomachinery | Amirkabir University of Technology |
Aazam Ghassemi | ||
Esmaeal Ghavanloo | Beams, plates and shells, Bio, Micro and Nano Mechanics, Dynamics, Vibration and Control, Fluid and solid interaction, Intelligent structures, Mechanics in micro and nano scale, Multiscale analysis, Nonclassical elasticity, Solid Mechanics, Structural dynamics | Shiraz University |
Jafar Ghazanfarian | Bio, Micro and Nano Mechanics, Computational heat transfer, Conduction heat transfer, Heat transfer in micro and nano scale, Radiative heat transfer, Thermodynamics and Heat Transfer | University of Zanjan |
Ali Ghorbanpour Arani | Beams, plates and shells, Bio, Micro and Nano Mechanics, Dynamics, Vibration and Control, Elastic and inelastic stress analysis, Impact mechanics, Mechanics in micro and nano scale, Pressure vessel and piping, Solid Mechanics, Thermoelasticity | Faculty of Mechanical Engineering, University of Kashan, Kashan, Iran. |
Majid Ghoreishi | Machining, Manufacturing and Production, Modern manufacturing methods, Welding | K.N Toosi University |
Hosein Golestanian | Bio, Micro and Nano Mechanics, Mechanics in micro and nano scale, Smart and composite structures, Solid Mechanics | Shahrekord University |
Nabard Habibi | Aerospace materials and structures, Computational and experimental methods in solid mechanics, Creep and fatigue analysis, Design and Reliability of Mechanical Systems, Elastic and inelastic stress analysis, Engineering ethics and safety requirements, Fracture mechanics, Innovation in curriculum, education and teaching methods, Manufacturing and Production, Mechanical Engineering Education and Globalization, Metal forming, Nondestructive testing, Offshore structures, Pressure vessel and piping, Solid Mechanics, Structural mechanics, Theoritical and experimental evaluation of reliability of mechanical elements, Vehicles and Transportations, Welding | University of Kurdistan |
Heshmat Allah Haghighat | Computational and experimental methods in solid mechanics, Manufacturing and Production, Metal forming, Solid Mechanics | Razi University |
Mehdi Hamzeie | Behavior of cogeneration systems using lost energy, Combined cooling, heat and power generation systems, Combustion and air pollution, Combustion and reaction flows, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Energy and Environment, Engine lubrication and cooling, Experimental fluid mechanics, Fluid Mechanics, Fuel consumption and air pollution reduction methods for internal combustion engines, Heat exchangers, Mass and heat transfer and phase change, Methods of numerical and experimental data analysis, Modern energy technologies, Multiphase flows, Non-Newtonian fluids, Rheometry, Thermal energy storage, Thermal power plants, Thermodynamics and Heat Transfer, Vehicles and Transportations | Azad Ahvaz University |
Seyed Reza Hamzeloo | Automation, Creep and fatigue analysis, Dynamics, Vibration and Control, Elastic and inelastic stress analysis, Fracture mechanics, Manufacturing and Production, Mechatronics, Modern manufacturing methods, Nondestructive testing, Solid Mechanics | Shahid Rajaee Teacher Training University |
Alireza Hosein Nezhad | Bio, Micro and Nano Mechanics, Fluid flow analysis in micro and nano scale, Heat transfer in micro and nano scale, Mechanics in micro and nano scale, Nanomaterials and nanostructures for energy applications | University of Sistan and Baluchestan |
Hossein Hosseini | Fracture mechanics, Manufacturing and Production, Nondestructive testing, Solid Mechanics | Amirkabir University of Technology |
Seyed Ali Asghar Hosseini | Condition monitoring of structures, Dynamics, Vibration and Control, Modeling of dynamic systems, Perturbation and nonlinear dynamics | Kharazmi University |
Ahmad Hosseini Sianaki | Design and control of robots and mechanisms, Dynamics, Vibration and Control, Energy and Environment | Azad Tehran Markaz University |
Abdolrahman Jaamialahmadi | Elastic and inelastic stress analysis, Manufacturing and Production, Metal forming, Solid Mechanics | Ferdowsi University of Mashhad |
Ali Jabbari | Automation, Computer aided design and manufacturing, Manufacturing and Production, Metal forming, Modern manufacturing methods | University of Arak |
Akbar Jafari | Bio, Micro and Nano Mechanics, Computational and experimental methods in solid mechanics, Condition monitoring of structures, Creep and fatigue analysis, Dynamics, Vibration and Control, Elastic and inelastic stress analysis, Fracture mechanics, Intelligent structures, Manufacturing and Production, Mechanics in micro and nano scale, Metal forming, Multiscale analysis, Nanomaterials, Nonclassical elasticity, Pressure vessel and piping, Smart and composite structures, Solid Mechanics, Structural mechanics | Technical and Vocational University |
Saeed Jafari Mehr Abadi | Beams, plates and shells, Bio, Micro and Nano Mechanics, Computational and experimental methods in solid mechanics, Dynamics, Vibration and Control, Elastic and inelastic stress analysis, Intelligent structures, Nanomaterials, Smart and composite structures, Solid Mechanics | Azad University of Arak |
Omid Jahanian | Alternative fuels, Automotive control systems, Behavior of cogeneration systems using lost energy, Chemical and phase equilibrium, Combined cooling, heat and power generation systems, Combustion and air pollution, Combustion and reaction flows, Electric and hybrid vehicles, Energy and Environment, Engineering ethics and safety requirements, Engine lubrication and cooling, Exergy and thermoeconomic of thermal systems, Fuel cells, Fuel consumption and air pollution reduction methods for internal combustion engines, Mechanical Engineering Education and Globalization, Modern energy technologies, Modern technologies in internal combustion engines, New thermodynamic cycles, Renewable energies, Thermodynamics and Heat Transfer, Thermodynamics of multiparticle systems, Vehicles and Transportations | Babol Noshirvani University of Technology |
Reza Jahedi | Creep and fatigue analysis, Elastic and inelastic stress analysis, Fracture mechanics, Impact and penetration problems, Smart and composite structures, Solid Mechanics | Shiraz Azad University |
Mehdi Jahromi | Aerodynamics and space propulsion, Combined cooling, heat and power generation systems, Combustion and air pollution, Compressible flows, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Conduction heat transfer, Design and Reliability of Mechanical Systems, Energy and Environment, Fluid Mechanics, Innovation in curriculum, education and teaching methods, Mechanical Engineering Education and Globalization, Modern technologies of energy, Optimization of mechanical systems, Thermodynamics and Heat Transfer, Transient flows, Turbomachinery, Turbulence flows and models, Vehicles and Transportations | Malek-Ashtar University of Technology |
Mehdi Jalali Aziz Pour | Machining, Manufacturing and Production, Material science, Metal forming, Modern manufacturing methods | Azad Ahvaz University |
Jafar Jamaati | Bio, Micro and Nano Mechanics, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Computational heat transfer, Conduction heat transfer, Fluid flow analysis in micro and nano scale, Fluid Mechanics, Heat transfer in micro and nano scale, Thermodynamics and Heat Transfer | Razi University |
Maziar Janghorban | ||
mehrdad javadi | Mechatronics dept. - Islamic Azad University - South Tehran Branch | |
Sattar Jedari Salami | Solid Mechanics | Department of mechanical engineering, Damavand branch, Islamic Azad University, Damavand, Iran |
Fathi Jegar Kandi | Control and navigation, Control of dynamic systems, Design and Reliability of Mechanical Systems, Dynamics, Vibration and Control, Fluid and solid interaction, Fluid and structure interaction, Fluid Mechanics, Geometric and dimensional tolerancing design and analysis, Modeling of dynamic systems, Safety and risk assessment of mechanical systems and products, Sound and vibration control, Space engineering and science, Theoritical and experimental evaluation of reliability of mechanical elements, Turbomachinery, Vehicles and Transportations | Sharif University of Technology |
Mehran Kadkhodaeean | Beams, plates and shells, Elastic and inelastic stress analysis, Manufacturing and Production, Material science, Metal forming, Solid Mechanics, Welding | Ferdowsi University of Mashhad |
Vali Kalantar | Combined cooling, heat and power generation systems, Energy and Environment, Modern energy technologies, Renewable energies, Water purifier | University of Yazd |
Mansoor Kamyar | Aerodynamics, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Fluid Mechanics | Amirkabir University of Technology |
Jafar Keighobadi | Automotive control systems, Control and navigation, Control of dynamic systems, Design and control of robots and mechanisms, Dynamics, Vibration and Control, Intelligent control systems and soft computing methodologies, Measurment and callibration, Mechatronics, Vehicles and Transportations | University of Tabriz |
Saeid Kheradmand | Combustion and air pollution, Combustion and reaction flows, Energy and Environment, Engine lubrication and cooling, Fluid Mechanics, Fuel consumption and air pollution reduction methods for internal combustion engines, Multiphase flows, Noise reduction, Thermodynamics and Heat Transfer, Vehicles and Transportations | Malek-Ashtar University of Technology |
Alireza Khodayari | Automotive control systems, Control and navigation, Control of dynamic systems, Design and control of robots and mechanisms, Dynamics of manned and unmanned vehicles, Dynamics, Vibration and Control, Intelligent control systems and soft computing methodologies, Mechanical Engineering Education and Globalization, Mechatronics, Modeling of dynamic systems, Modern capabilities in modeling and simulation of digital and automation manufacturing, Modern technologies in internal combustion engines, Vehicles and Transportations | Department of Mechanical Enineering Pardis Branch Islamic Azad University |
Seyed Amir Khosravi Frad | Beams, plates and shells, Computational and experimental methods in solid mechanics, Elastic and inelastic stress analysis, Fracture mechanics, Innovation in curriculum, education and teaching methods, Mechanical Engineering Education and Globalization, Nonclassical elasticity, Smart and composite structures, Solid Mechanics, Thermoelasticity | Shiraz University |
Yaser Kiani | Solid Mechanics | Shahrekord University |
Abbas Kosarineia | Compressible flows, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Conduction heat transfer, Fluid Mechanics, Heat exchangers, Heat transfer enhancement, Hydrodynamics, Laminar flows, Methods of numerical and experimental data analysis, Non-Newtonian fluids, Thermodynamics and Heat Transfer, Turbomachinery, Turbulence flows and models | Department of Mechanical Engineering, Ahvaz Branch, Islamic Azad University, Ahvaz, Iran |
J.Y. Liou | Kao Yuan University, Kaohsiung 82151, Taiwan | |
Hossein Mahbadi | Beams, plates and shells, Creep and fatigue analysis, Elastic and inelastic stress analysis, Fracture mechanics, Pressure vessel and piping, Smart and composite structures, Solid Mechanics, Thermoelasticity | Islamic Azad Univ., Central Tehran Branch |
Mohammad Javad Mahmoodi | Beams, plates and shells, Bio, Micro and Nano Mechanics, Computational and experimental methods in solid mechanics, Dynamics, Vibration and Control, Elastic and inelastic stress analysis, Modeling of dynamic systems, Nonclassical elasticity, Smart and composite structures, Solid Mechanics, Structural mechanics | Shahid Beheshti University |
Alireza Majidian | Combustion and air pollution, Energy and Environment, Engineering ethics and safety requirements, Fluid Mechanics, Fuel consumption and air pollution reduction methods for internal combustion engines, Mechanical Engineering Education and Globalization, Multiphase flows, Thermal power plants, Turbomachinery, Vehicles and Transportations | Azad Sari University |
Mahmood Mani | Aerodynamics, Compressible flows, Experimental fluid mechanics, Fluid Mechanics | Amirkabir University of Technology |
Masood Masih Tehrani | Automotive control systems, Vehicle dynamics, Vehicle noise reduction, Vehicles and Transportations | Iran University of Science and Technology |
Karim Mazaheri | Aerodynamics, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Fluid Mechanics | Sharif University of Technology |
Hamid Mehdigholi | Acoustics, Dynamics, Vibration and Control, Sound and vibration control | Sharif University of Technology |
Ramin Mehdipour | faculty member | |
Arash Mirabdolah Lavasani | Bio, Micro and Nano Mechanics, Boundary layers, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Computational heat transfer, Conduction heat transfer, Energy and Environment, Experimental fluid mechanics, Fluid Mechanics, Heat exchangers, Heat transfer in micro and nano scale, Laminar flows, Methods of numerical and experimental data analysis, Renewable energies, Thermodynamics and Heat Transfer | Islamic Azad University Centeral Tehran Branch |
Majid Moavenian | Automation, Automotive control systems, Condition monitoring of structures, Control of dynamic systems, Design and Reliability of Mechanical Systems, Dynamics, Vibration and Control, Innovation in curriculum, education and teaching methods, Innovative design of mechanisms, Intelligent control systems and soft computing methodologies, Manufacturing and Production, Mechanical Engineering Education and Globalization, Modeling of dynamic systems, Nondestructive testing, Process identification and control, Sound and vibration control, Structural dynamics, Suspension, steering and braking systems, Vehicles and Transportations | Ferdowsi University of Mashhad |
Mohammad Kazem Moayyedi | Aerodynamics, Aerodynamics and space propulsion, Boundary layers, Combustion and air pollution, Compressible flows, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Computational heat transfer, Conduction heat transfer, Dynamics, Vibration and Control, Energy and Environment, Flow in porous media, Fluid and solid interaction, Fluid and structure interaction, Fluid Mechanics, Heat transfer in porous media, Hydrodynamics, Inverse heat transfer, Laminar flows, Large scale vertices modelling, Non-Newtonian fluids, Thermodynamics and Heat Transfer, Transient flows, Turbulence flows and models, Vehicles and Transportations | Department of Mechanical Engineering, University of Qom |
Mehdi Moghimi Zand | Acoustics, Application of mechanical engineering in living organisms, Bio, Micro and Nano Mechanics, Dynamics and control of micro and nano mechanisms, Dynamics of multiple particle systems, Dynamics, Vibration and Control, Energy and Environment, Engineering ethics and safety requirements, Fluid and heat transfer in biological tissues, Fluid and solid interaction, Fluid flow analysis in micro and nano scale, Innovation in curriculum, education and teaching methods, Intelligent structures, Manufacturing process of micro and nano mechanisms, Mechanical Engineering Education and Globalization, Mechanics in micro and nano scale, Modeling of dynamic systems, Multiscale analysis, Nanomaterials, Nanomaterials and nanostructures for energy applications, Nonlinear vibration, Perturbation and nonlinear dynamics, Solid Mechanics, Sound and vibration control, Structural dynamics | University of Tehran |
Hamed Mohades deylami | Aerodynamics, Boundary layers, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Computational heat transfer, Conduction heat transfer, Experimental fluid mechanics, Flow in porous media, Fluid Mechanics, Heat transfer enhancement, Heat transfer in porous media, Laminar flows, Large scale vertices modelling, Thermodynamics and Heat Transfer, Turbomachinery, Turbulence flows and models | University of Gilan |
Hossein Mohammadi | Application of mechanical engineering in living organisms, Bio, Micro and Nano Mechanics, Control of dynamic systems, Design and control of robots and mechanisms, Dynamics and control of micro and nano mechanisms, Dynamics, Vibration and Control, Fluid flow analysis in micro and nano scale, Manufacturing and Production, Mechanics in micro and nano scale, Modeling of dynamic systems, Nanomaterials, Nonlinear vibration, Perturbation and nonlinear dynamics | Shiraz University |
Meysam Mohammadi Amin | Aerodynamics, Aerodynamics and space propulsion, Application of mechanical engineering in living organisms, Bio, Micro and Nano Mechanics, Boundary layers, Compressible flows, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Dynamics, Vibration and Control, Fluid and solid interaction, Fluid and structure interaction, Fluid Mechanics, Innovation in curriculum, education and teaching methods, Laminar flows, Mechanical Engineering Education and Globalization, Space engineering and science, Turbulence flows and models, Vehicles and Transportations | Aerospace Research Institute |
Hamid Mohammadion | Boundary layers, Compressible flows, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Computational heat transfer, Conduction heat transfer, Fluid Mechanics, Inverse heat transfer, Laminar flows, Non-Newtonian fluids, Transient flows | Azad University of Shahrood |
Hamid Mohammad Sedighi | Bio, Micro and Nano Mechanics, Dynamics and control of micro and nano mechanisms, Dynamics, Vibration and Control, Manufacturing process of micro and nano mechanisms, Mechanics in micro and nano scale, Nonlinear vibration, Perturbation and nonlinear dynamics | Shahid Chamran University of Ahvaz |
Mehdi Mohammmadi Mehr | Beams, plates and shells, Bio, Micro and Nano Mechanics, Dynamics, Vibration and Control, Intelligent structures, Mechanics in micro and nano scale, Nonclassical elasticity, Smart and composite structures, Solid Mechanics, Structural mechanics, Thermoelasticity | Kashan University |
Saeed Reza Moheb Poor | Beams, plates and shells, Elastic and inelastic stress analysis, Solid Mechanics, Structural mechanics | Persian Gulf University |
Gholam Reza Molayei Manesh | Boundary layers, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Computational heat transfer, Conduction heat transfer, Electric and hybrid vehicles, Energy and Environment, Engineering ethics and safety requirements, Engine lubrication and cooling, Flow in porous media, Fluid Mechanics, Fuel cells, Fuel consumption and air pollution reduction methods for internal combustion engines, Heating, cooling and air-conditioning, Heat transfer in porous media, Mechanical Engineering Education and Globalization, Modern energy technologies, Modern technologies in internal combustion engines, Renewable energies, Thermodynamics and Heat Transfer, Vehicles and Transportations | Iran University of Science and Technology |
Hamed Moradi | Automation, Combined cooling, heat and power generation systems, Control of dynamic systems, Design and control of robots and mechanisms, Dynamics, Vibration and Control, Echo-friendly design methods, Energy and Environment, Fuel consumption and air pollution reduction methods for internal combustion engines, Heat exchangers, Heating and cooling facilities, Heating, cooling and air-conditioning, Innovation in curriculum, education and teaching methods, Intelligent control systems and soft computing methodologies, Machining, Manufacturing and Production, Mechanical Engineering Education and Globalization, Modeling of dynamic systems, Nonlinear vibration, Offshore structures, Perturbation and nonlinear dynamics, Process identification and control, Smart and composite structures, Solid Mechanics, Structural dynamics, Thermal power plants, Thermodynamics and Heat Transfer, Vehicle noise reduction | Sharif University of Technology |
Seyed Salar Moshkoh | Bio, Micro and Nano Mechanics, Chemical and phase equilibrium, Conduction heat transfer, Inverse heat transfer, Mass and heat transfer and phase change, Nanomaterials, Nanomaterials and nanostructures for energy applications, Radiative heat transfer, Thermodynamics and Heat Transfer, Thermodynamics of multiparticle systems | Urmia University of Technology |
Mohammad Bagher Nazari | Fracture mechanics, Solid Mechanics | University of Shahrood |
Mohsen Nazari | Bio, Micro and Nano Mechanics, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Computational heat transfer, Conduction heat transfer, Flow in porous media, Fluid flow analysis in micro and nano scale, Fluid Mechanics, Heat transfer in micro and nano scale, Heat transfer in porous media, Multiphase flows, Thermodynamics and Heat Transfer | Shahrood University of Tech. |
Reza Nazemnezhad | Bio, Micro and Nano Mechanics | Damghan University |
Abbas Niknejad | Computational and experimental methods in solid mechanics, Impact and penetration problems, Impact mechanics, Manufacturing and Production, Mechanical Engineering Education and Globalization, Metal forming, Modern technologies in internal combustion engines, Smart and composite structures, Solid Mechanics | Yasouj University |
Ali Noori Broojerdi | Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Computational heat transfer, Conduction heat transfer, Flow in porous media, Fluid Mechanics, Multiphase flows, Radiative heat transfer, Rheometry, Thermodynamics and Heat Transfer | Sharif University of Technology |
Behzad Omidi Kashani | Chemical and phase equilibrium, Combustion and air pollution, Combustion and reaction flows, Condensation, evaporation and refrigeration, Energy and Environment, Engineering ethics and safety requirements, Engine lubrication and cooling, Fuel consumption and air pollution reduction methods for internal combustion engines, Heating, cooling and air-conditioning, Mass and heat transfer and phase change, Mechanical Engineering Education and Globalization, Thermal power plants, Thermodynamics and Heat Transfer, Vehicles and Transportations, Water purifier | University of Birjand |
Samira Payan | Heat exchangers, Inverse heat transfer, Radiative heat transfer, Thermodynamics and Heat Transfer | University of Sistan and Baluchestan |
Esmaeel Poor Saeedi | Bio, Micro and Nano Mechanics, Computational and experimental methods in solid mechanics, Creep and fatigue analysis, Dynamics, Vibration and Control, Energy and Environment, Exergy and thermoeconomic of thermal systems, Fluid and solid interaction, Fluid and structure interaction, Fluid Mechanics, Fracture mechanics, Manufacturing process of micro and nano mechanisms, Material science, Mechanics in micro and nano scale, Nanomaterials, Nanomaterials and nanostructures for energy applications, Nondestructive testing, Pressure vessel and piping, Solid Mechanics, Statistical analysis in fracture and impact mechanics, Structural mechanics, Theoritical and experimental evaluation of reliability of mechanical elements, Thermal power plants, Thermodynamics and Heat Transfer, Turbomachinery | University of Zanjan |
Amin RabieZadeh | Bio, Micro and Nano Mechanics, Creep and fatigue analysis, Fracture mechanics, Manufacturing and Production, Material science, Nanomaterials, Nondestructive testing, Solid Mechanics, Welding | Islamic Azad University, Shiraz Branch |
Roham Rafiee | Mechanics in micro and nano scale | |
Abbas Rahi | Acoustics, Bio, Micro and Nano Mechanics, Control of dynamic systems, Design and control of robots and mechanisms, Dynamics and control of micro and nano mechanisms, Dynamics of multiple particle systems, Dynamics, Vibration and Control, Fluid and solid interaction, Intelligent control systems and soft computing methodologies, Intelligent structures, Mechanics in micro and nano scale, Modeling of dynamic systems, Nonlinear vibration, Perturbation and nonlinear dynamics, Sound and vibration control, Structural dynamics | Shahid Beheshti University |
Mostafa Rahimi | Boundary layers, Computational heat transfer, Conduction heat transfer, Energy and Environment, Experimental fluid mechanics, Fluid Mechanics, Heating and cooling facilities, Heating, cooling and air-conditioning, Heat transfer enhancement, Laminar flows, Optimization of energy consumption in buildings and industry, Thermodynamics and Heat Transfer | University of Mohaghegh Ardabili |
Sadegh Rahmati | Automation, Bio, Micro and Nano Mechanics, Computer aided design and manufacturing, Design and Reliability of Mechanical Systems, Geometric and dimensional tolerancing design and analysis, Machining, Manufacturing and Production, Manufacturing process of micro and nano mechanisms, Material science, Metal forming, Modern manufacturing methods, Nondestructive testing, Rapid prototyping | Science and Research Branch |
Seyed Esmaeel Razavi | Application of mechanical engineering in living organisms, Bio, Micro and Nano Mechanics, Conduction heat transfer, Fluid and structure interaction, Fluid Mechanics, Heat transfer enhancement, Thermodynamics and Heat Transfer | University of Tabriz |
Kambiz Reza Pour | Alternative fuels, Behavior of cogeneration systems using lost energy, Combined cooling, heat and power generation systems, Combustion and air pollution, Echo-friendly design methods, Energy and Environment, Fuel cells, Fuel consumption and air pollution reduction methods for internal combustion engines, Global warming, Heating and cooling facilities, Heating, cooling and air-conditioning, Mechanical Engineering Education and Globalization, Modern energy technologies, Modern technologies of energy, Optimization of energy consumption in buildings and industry, Renewable energies, Sustainable development in mechanical engineering, Thermal energy storage, Thermal power plants, Vehicles and Transportations, Water purifier | Aazad Karaj University |
Marzieh Reza Zadeh | Bio, Micro and Nano Mechanics, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Computational heat transfer, Conduction heat transfer, Energy and Environment, Fluid and heat transfer in biological tissues, Fluid and structure interaction, Fluid flow analysis in micro and nano scale, Fluid Mechanics, Heat exchangers, Heating, cooling and air-conditioning, Laminar flows, Methods of numerical and experimental data analysis, Optimization of energy consumption in buildings and industry, Thermodynamics and Heat Transfer | Golpayegan University |
Mohammad Riahi | Dynamics, Vibration and Control, Manufacturing and Production, Measurment and callibration, Nondestructive testing | Iran University of Science and Technology |
Seyed Ali Sadoogh Venini | Aerospace materials and structures, Bio, Micro and Nano Mechanics, Creep and fatigue analysis, Fracture mechanics, Manufacturing and Production, Material science, Metal forming, Nanomaterials, Smart and composite structures, Solid Mechanics, Vehicles and Transportations, Welding | Amirkabir University of Technology |
Hamed Saeedi | Beams, plates and shells, Computational and experimental methods in solid mechanics, Creep and fatigue analysis, Elastic and inelastic stress analysis, Fracture mechanics, Impact and penetration problems, Impact mechanics, Nonclassical elasticity, Pressure vessel and piping, Smart and composite structures, Solid Mechanics, Structural mechanics, Thermoelasticity | Iran University of Science and Technology |
Majid Safarabadi Farahani | Aerospace materials and structures, Bio, Micro and Nano Mechanics, Computational and experimental methods in solid mechanics, Condition monitoring of structures, Dynamics, Vibration and Control, Elastic and inelastic stress analysis, Manufacturing and Production, Mechanics in micro and nano scale, Pressure vessel and piping, Smart and composite structures, Solid Mechanics, Structural mechanics, Thermoelasticity, Vehicles and Transportations | University of Tehran |
Mehdi Safari | Computational and experimental methods in solid mechanics, Computer aided design and manufacturing, Elastic and inelastic stress analysis, Manufacturing and Production, Metal forming, Modern manufacturing methods, Solid Mechanics, Welding | University of Arak |
Manoochehr Salehi | Beams, plates and shells, Bio, Micro and Nano Mechanics, Elastic and inelastic stress analysis, Mechanics in micro and nano scale, Multiscale analysis, Nonclassical elasticity, Smart and composite structures, Solid Mechanics, Structural mechanics | Amirkabir University of Technology |
Mohammad Behshad Shafiee | Behavior of cogeneration systems using lost energy, Bio, Micro and Nano Mechanics, Combined cooling, heat and power generation systems, Condensation, evaporation and refrigeration, Conduction heat transfer, Energy and Environment, Heat transfer enhancement, Heat transfer in micro and nano scale, Thermal energy storage, Thermodynamics and Heat Transfer, Water purifier | Sharif University of Technology |
Azadeh Shahidian | Application of mechanical engineering in living organisms, Bio, Micro and Nano Mechanics, Combined cooling, heat and power generation systems, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Energy and Environment, Engineering ethics and safety requirements, Exergy and thermoeconomic of thermal systems, Fluid and heat transfer in biological tissues, Fluid flow analysis in micro and nano scale, Heating and cooling facilities, Heating, cooling and air-conditioning, Heat transfer in micro and nano scale, Mechanical Engineering Education and Globalization, Modern technologies of energy, Optimization of energy consumption in buildings and industry, Thermodynamics and Heat Transfer | K.N Toosi University |
Majid Shahravi | Aerospace materials and structures, Control of dynamic systems, Design and Reliability of Mechanical Systems, Dynamics, Vibration and Control, Echo-friendly design methods, Energy and Environment, Fluid and solid interaction, Geometric and dimensional tolerancing design and analysis, Innovation in curriculum, education and teaching methods, Innovative design of mechanisms, Mechanical Engineering Education and Globalization, Modeling of dynamic systems, Modern energy technologies, Modern technologies in internal combustion engines, Modern technologies of energy, Offshore structures, Optimization of mechanical systems, Railway engineering, Renewable energies, Safety and risk assessment of mechanical systems and products, Solid Mechanics, Space engineering and science, Statistical analysis in fracture and impact mechanics, Structural dynamics, Sustainable development in mechanical engineering, Theoritical and experimental evaluation of reliability of mechanical elements, Vehicles and Transportations | Iran University of Science and Technology |
Mohammad Sharyat | Beams, plates and shells, Bio, Micro and Nano Mechanics, Computational and experimental methods in solid mechanics, Elastic and inelastic stress analysis, Impact mechanics, Mechanics in micro and nano scale, Multiscale analysis, Pressure vessel and piping, Smart and composite structures, Solid Mechanics, Structural mechanics, Thermoelasticity | K.N Toosi University |
Abdullah Sofiyev | ||
Hamid Reza Tabatabaie | Aerodynamics and space propulsion, Aerospace materials and structures, Alternative fuels, Automotive control systems, Boundary layers, Combined cooling, heat and power generation systems, Compressible flows, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Design, analysis and manufacturing of automotive body, Electric and hybrid vehicles, Energy and Environment, Fluid Mechanics, Heating and cooling facilities, Manufacturing and Production, Mechanical Engineering Education and Globalization, Methods of numerical and experimental data analysis, Modern capabilities in modeling and simulation of digital and automation manufacturing, Modern energy technologies, Modern manufacturing methods, Modern technologies in internal combustion engines, Modern technologies of energy, Renewable energies, Space engineering and science, Turbomachinery, Turbulence flows and models, Vehicles and Transportations | Kashan University |
Yaghoob Tadi Bani | Bio, Micro and Nano Mechanics, Nanomaterials, Solid Mechanics, Structural mechanics, Suspension, steering and braking systems, Vehicles and Transportations | Shahrekord University |
Pezhman Taghipour Birgani | Acoustics, Condition monitoring of structures, Dynamics, Vibration and Control, Manufacturing and Production, Nondestructive testing, Smart and composite structures, Solid Mechanics, Structural mechanics | Department of Mechanical Engineering, Ahvaz Branch, Islamic Azad University, Ahvaz, Iran. |
Mojtaba Tahani | Aerodynamics, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Energy and Environment, Fluid Mechanics, Renewable energies | University of Tehran |
Alireza Tahavor | Application of mechanical engineering in living organisms, Bio, Micro and Nano Mechanics, Boundary layers, Compressible flows, Computational fluid dynamics (Finite difference, Finite volume and Lattice Boltzmann), Computational heat transfer, Conduction heat transfer, Energy and Environment, Fluid Mechanics, Heat transfer enhancement, Laminar flows, Mass and heat transfer and phase change, Renewable energies, Thermodynamics and Heat Transfer, Turbulence flows and models | Shiraz Azad University |
S.A. Tajalli | ||
Rooh Allah Talebi | Acoustics, Aerospace materials and structures, Beams, plates and shells, Dynamics of manned and unmanned vehicles, Fluid and solid interaction, Solid Mechanics, Sound and vibration control, Suspension, steering and braking systems, Vehicle dynamics | Iran University of Science and Technology |
Reza Teymoori Falal | Acoustics, Beams, plates and shells, Dynamics, Vibration and Control, Elastic and inelastic stress analysis, Fluid and solid interaction, Fracture mechanics, Impact mechanics, Solid Mechanics, Structural dynamics | University of Zanjan |
Abbas Vafaee | Computer aided design and manufacturing, Design and Reliability of Mechanical Systems, Manufacturing and Production, Metal forming, Modern manufacturing methods, Optimization of mechanical systems | Ferdowsi University of Mashhad |
Yongping Wan | ||
Mohammad Reza Yazdi | Control of dynamic systems, Design and control of robots and mechanisms, Dynamics of multiple particle systems, Dynamics, Vibration and Control, Modeling of dynamic systems, Nonlinear vibration | University of Tehran |
Aghil Yoosefi Koma | Control of dynamic systems, Design and Reliability of Mechanical Systems, Dynamics of multiple particle systems, Dynamics, Vibration and Control, Innovative design of mechanisms | University of Tehran |
Mehdi Zamaian | Bio, Micro and Nano Mechanics, Dynamics and control of micro and nano mechanisms, Dynamics, Vibration and Control, Nonlinear vibration | Department of mechanical engineering, Faculty of engineering, Kharazmi University, P.O. Box 15719-14911, Tehran, Iran |
Sima Ziaee | Design and Reliability of Mechanical Systems, Elastic and inelastic stress analysis, Solid Mechanics, Statistical analysis in fracture and impact mechanics | University of Yasooj |
Seyed Ali Reza Zolfaghari | Energy and Environment, Heating and cooling facilities, Heating, cooling and air-conditioning, Optimization of energy consumption in buildings and industry, Renewable energies | University of Birjand |
محمد حسین احمدی |