Abbasi, H. New Correlations for the Prediction of Terminal Velocity and Drag Coefficient of a Bubble Rising [Volume 22, Issue 2, 2021, Pages 71-87]
Abbasi, Hossein Comparative study of ultrasonic vibrations assisted EDM and magnetic field assisted EDM processes [Volume 21, Issue 1, 2020, Pages 45-64]
Abbasi, M. Finite Element Analysis of Functionally Graded Piezoelectric Beams [Volume 11, Issue 1, 2010, Pages 45-73]
Abbasi, Mohammad Reza Analytical Solution for Buckling Analysis of FGM Axisymmetric Cylindrical Shell under Axial Load using Shear Deformation Theory and Perturbation Technique [Volume 26, Issue 2, 2025, Pages 111-134]
Abdelfattah, Osama Influence of Biodiesel from Egyptian Used Cooking Oils on Performance and Emissions of Diesel Engine [Volume 18, Issue 1, 2017, Pages 65-80]
Abiri, A. New Correlations for the Prediction of Terminal Velocity and Drag Coefficient of a Bubble Rising [Volume 22, Issue 2, 2021, Pages 71-87]
Abolbashari, M.H. Vibrational Analysis of Cables Using the Non Standard Finite Difference Method [Volume 22, Issue 1, 2021, Pages 74-89]
Acheampong, Juliet Tensile properties and fatigue behavior of AHSS-DP 350/600 subjected to laser shock processing [Volume 20, Issue 2, 2019, Pages 74-86]
Adeli, Sara Integrating Adaptive Sliding Mode Control and Deep Learning for Autonomous Vision-driven Fruit Sorting robot [Volume 26, Issue 2, 2025, Pages 6-34]
Afshar, Mahmoud A Novel Straightforward Practice for Rotameter Calibration in Gas Flow Measurement [Volume 24, Issue 1, 2023, Pages 5-14]
Afshari, D. Investigation of welding parameters effects on residual stresses of resistance spot welding of AZ31 alloy [Volume 22, Issue 1, 2021, Pages 27-41]
Afshari, E. Thermo-economic performance of an indirect hybrid system of solid oxide fuel cell and micro gas turbine [Volume 22, Issue 1, 2021, Pages 5-26]
Afzalpour, Narges Wheelchair stabilization by the control of a spatial 3-RRS mechanism [Volume 17, Issue 2, 2016, Pages 84-100]
Aghaei, A.R. Effect of Magnetic Field on Heat Transfer of Nanofluid with Variable Properties on the Inclined Enclosure [Volume 15, Issue 1, 2014, Pages 28-38]
Ahangari Sisi, Zahra Time Delay Estimation and PID Controller Design using Smith Predictor for Lever Arm Platform [Volume 24, Issue 2, 2023, Pages 142-156]
Ahmadi, Behzad Thermo-economic analysis of absorption chiller integrated with a GE-F5 gas turbine for power enhancement (Zanbagh power plant, studied case) [Volume 19, Issue 1, 2018, Pages 20-33]
Ahmadi Boyaghchi, F. Assessment of a Real Combined Cycle Power Plant with Supplementary Firing Based on Advanced Exergy/Exergoeconomic Methods [Volume 15, Issue 2, 2014, Pages 28-58]
Ahrar, A. J. Influence Of Coiled Wire Presence On The Convective Heat Transfer Coefficients In R-600 Condensers [Volume 22, Issue 1, 2021, Pages 42-53]
Akbari, Afzal Transient Response of a Functionally Graded Piezoelectric Rectangular Plane with Multiple Cracks under Electromechanical Impacts [Volume 24, Issue 1, 2023, Pages 40-69]
Akbari Alashti, R. Linear Thermoplastic Analysis of FGM Rotating Discs with Variable Thickness [Volume 14, Issue 2, 2013, Pages 73-87]
Akbari Alashti, R. Thermo-elastic analysis of a functionally graded thick sphere by differential quadrature method [Volume 12, Issue 2, 2011, Pages 27-43]
Akbarshahi, H. Analytical Modeling of Axial Collapse of Circular Hybrid Tubes [Volume 12, Issue 2, 2011, Pages 44-53]
Alam-Hakkakan, Hosein Ali Investigating the Influence of Piezoelectric Excitation on the Veering Phenomenon Associated with Electrostatically Coupled Micro-beams [Volume 24, Issue 2, 2023, Pages 60-80]
Alaribe, Kenneth OAnalysis of squeezing flow of viscous fluid under the influence of slip and magnetic field: comparative studies of different approximate analytical methods [Volume 20, Issue 2, 2019, Pages 5-27]
Alasty, A. Variable Structure Behavioural Controller for Multi-agent Systems [Volume 10, Issue 2, 2009, Pages 49-63]
Alimardani, F. Modeling and Intelligent Control System Design for Overtaking Maneuver in Autonomous Vehicles [Volume 13, Issue 1, 2012, Pages 68-87]
Alipour, A. Numerical Simulation of Beta Type Stirling Engine Considering Heat and Power Losses [Volume 15, Issue 2, 2014, Pages 5-27]
Alipour, M. M.An Analytical Shear Factor for FGM Circular Plates with Non-uniform Elastic Foundations and Normal and Shear Tractions [Volume 14, Issue 2, 2013, Pages 50-72]
Alipour, M. M.A Differential Transform Approach for Modal Analysis of Variable Thickness Two-directional FGM Circular Plates on Elastic Foundations [Volume 11, Issue 2, 2010, Pages 15-38]
Alipour, M. Non-Equilibruim Molecular Dynamics Simulation of Poiseuille Flow in a Nanochannel [Volume 11, Issue 1, 2010, Pages 21-33]
Alizadeh, M. Linear Thermoplastic Analysis of FGM Rotating Discs with Variable Thickness [Volume 14, Issue 2, 2013, Pages 73-87]
Alizadeh Attar, Alireza A Novel Straightforward Practice for Rotameter Calibration in Gas Flow Measurement [Volume 24, Issue 1, 2023, Pages 5-14]
Alizadeh Attar, Mehdi A Novel Straightforward Practice for Rotameter Calibration in Gas Flow Measurement [Volume 24, Issue 1, 2023, Pages 5-14]
Allam, Sabry Influence of Biodiesel from Egyptian Used Cooking Oils on Performance and Emissions of Diesel Engine [Volume 18, Issue 1, 2017, Pages 65-80]
Aminfar, H. Eulerian simulation of bubble columns reactors and effect of various parameters on the gas holdup [Volume 13, Issue 1, 2012, Pages 52-67]
Aminfar, H. Modeling of Upward Subcooled Flow Boiling of Refrigerant-113 in a Vertical Annulus [Volume 12, Issue 1, 2011, Pages 19-40]
Aminfar, H. Experimental Study on the Effect of Magnetic Field on Critical Heat Flux of Ferrofluid Flow Boiling in a Vertical Tube [Volume 19, Issue 2, 2018, Pages 116-126]
Aminy, Mohammad Thermo-economic analysis of absorption chiller integrated with a GE-F5 gas turbine for power enhancement (Zanbagh power plant, studied case) [Volume 19, Issue 1, 2018, Pages 20-33]
Amirkhani, Saeed Model-based Approach for Multi-sensor Fault Identification in Power Plant Gas Turbines [Volume 21, Issue 1, 2020, Pages 65-86]
Amoah, Martin Tensile properties and fatigue behavior of AHSS-DP 350/600 subjected to laser shock processing [Volume 20, Issue 2, 2019, Pages 74-86]
Amrollahipour, R. Experimental Study on the Magnetomechanical Characteristics of Ni-Mn-Ga Ferromagnetic Shape Memory Alloy Single Crystals [Volume 14, Issue 1, 2013, Pages 72-84]
Anbumani, K. A Comparative Study on the use of Butyl Esters of Soyabean and Sunflower Oils as Biodiesel Fuel for Compression Ignition Engine [Volume 12, Issue 1, 2011, Pages 68-85]
Arabi, Seyed Mehdi Thermo-economic analysis of absorption chiller integrated with a GE-F5 gas turbine for power enhancement (Zanbagh power plant, studied case) [Volume 19, Issue 1, 2018, Pages 20-33]
Arabkoohsar, A. Proposing a Novel Configuration for CGSs Aimed at Reducing Energy Consumption and Exergy Destruction [Volume 15, Issue 1, 2014, Pages 5-27]
Arabkoohsar, A. Fuel Consumption Minimization in Greenhouses by Employing an Innovative System Taking Advantage of Solar and Geothermal Energies [Volume 15, Issue 2, 2014, Pages 91-115]
Arabkoohsar, Ahmad Dynamic Modelling of a Compressed Air Energy Storage System in a Grid Connected Photovoltaic Plant [Volume 16, Issue 1, 2015, Pages 29-51]
Arbab Tafti, M.R. Model Predictive Control System Design using ARMAX Identification Method for Car-following Behavior [Volume 14, Issue 1, 2013, Pages 48-71]
Arghavani, J. A fiber-reinforced Transversely Isotropic Constitutive Model for Liver Tissue [Volume 14, Issue 2, 2013, Pages 88-97]
Ariakia, Arian Numerical Analysis of Composite Beams with Piezoelectric Actuators [Volume 26, Issue 2, 2025, Pages 135-148]
Armin, A. Finite Element Analysis of Functionally Graded Piezoelectric Beams [Volume 11, Issue 1, 2010, Pages 45-73]
Arteshyar, Koosha Free vibration analysis of thin annular plates integrated with piezoelectric layers using differential quadrature method [Volume 20, Issue 1, 2019, Pages 71-93]
Asemi, Kamran Buckling and static analyses of functionally graded saturated porous thick beam resting on elastic foundation based on higher order beam theory [Volume 20, Issue 1, 2019, Pages 94-112]
Asgari, G. R. A generalized upper bound solution for bimetallic rod extrusion through arbitrarily curved dies [Volume 13, Issue 1, 2012, Pages 23-35]
Askari, Amir Reza Investigating the Influence of Piezoelectric Excitation on the Veering Phenomenon Associated with Electrostatically Coupled Micro-beams [Volume 24, Issue 2, 2023, Pages 60-80]
Ayatollahi, M. Multiple Moving Cracks in a Nonhomogeneous Orthotropic Strip [Volume 14, Issue 1, 2013, Pages 17-32]
Ayatollahi, M. Mixed Mode Fracture Analysis of Multiple Interface Cracks [Volume 15, Issue 2, 2014, Pages 78-90]
Ayatollahi, Mojtaba Multiple cracks in an elastic half-plane subjected to thermo-mechanical loading [Volume 17, Issue 2, 2016, Pages 19-45]
Ayatollahi, Mojtaba Transient Response of a Functionally Graded Piezoelectric Rectangular Plane with Multiple Cracks under Electromechanical Impacts [Volume 24, Issue 1, 2023, Pages 40-69]
Ayatollahi, Mojtaba Fracture Behavior of Bonded Dissimilar Piezoelectric Rectangular Planes with Multiple Interfacial Cracks under Anti-plane Mechanical and In-plane Electric Impact Loads [Volume 26, Issue 1, 2025, Pages 44-65]
Azizi, T. Assessment of a Real Combined Cycle Power Plant with Supplementary Firing Based on Advanced Exergy/Exergoeconomic Methods [Volume 15, Issue 2, 2014, Pages 28-58]
B
Babaei, Masoud Buckling and static analyses of functionally graded saturated porous thick beam resting on elastic foundation based on higher order beam theory [Volume 20, Issue 1, 2019, Pages 94-112]
Babaei Spouei, Reza A Comparison of Corrosion Behavior of Coarse and Ultrafine Grain Commercially Pure Titanium in Simulated Body Fluid [Volume 26, Issue 1, 2025, Pages 114-129]
Badri, M. A. Using Weibull probability distribution to calibrate prevailing wind applying in oil spill simulation [Volume 13, Issue 1, 2012, Pages 5-22]
Bagheri, R. Multiple Moving Cracks in a Nonhomogeneous Orthotropic Strip [Volume 14, Issue 1, 2013, Pages 17-32]
Bagheri, R. Mixed Mode Fracture Analysis of Multiple Interface Cracks [Volume 15, Issue 2, 2014, Pages 78-90]
Bagheri, Rasul Transient Response of a Functionally Graded Piezoelectric Rectangular Plane with Multiple Cracks under Electromechanical Impacts [Volume 24, Issue 1, 2023, Pages 40-69]
Bagherinejad, Navid A Novel Straightforward Practice for Rotameter Calibration in Gas Flow Measurement [Volume 24, Issue 1, 2023, Pages 5-14]
Bahrainian, Seyed Saied The Effect of Repeated Impact Loading on Reservoir Rock Properties [Volume 21, Issue 2, 2020]
Bahrami, M Nonlinear Non-minimum Phase Flight Vehicle Control Using Dynamic Sliding Manifold [Volume 9, Issue 2, 2020, Pages 42-58]
Bahtui, A. Thermoelastic Analysis in Thick FGM Cylinders with Extended Profile [Volume 12, Issue 2, 2011, Pages 73-91]
Baidoo, Philip Tensile properties and fatigue behavior of AHSS-DP 350/600 subjected to laser shock processing [Volume 20, Issue 2, 2019, Pages 74-86]
Bakhsheshy, Ali Effect of temperature on free vibration of functionally graded microbeams [Volume 19, Issue 1, 2018, Pages 5-19]
Bakkhoshnevis, Abdolamir Experimental investigation for wake of the circular cylinder by attaching different number of tripping wires [Volume 17, Issue 1, 2016, Pages 5-25]
Bakkhoshnevis, Abdolamir Experimental Investigation of wake on an elliptic cylinder in the presence of tripping wire [Volume 18, Issue 1, 2017, Pages 81-102]
Bak Khoshnevis, A. Experimental Investigation of the Flow Structure around a Pitching Airfoil by Mean and Instantaneous Data [Volume 23, Issue 2, 2022, Pages 5-32]
Bandyopadhyay, Asish Parametric optimization of cylindrical grinding process through hybrid Taguchi method and RSM approach using genetic algorithm [Volume 19, Issue 1, 2018, Pages 34-62]
Baraheni, Mohammad Experimental Investigation of Injection Pattern Effect on Tensile Strength of PLA Material in FDM Processes [Volume 26, Issue 2, 2025, Pages 51-71]
Barati, F. Calculating Stress Intensity Factor for Small Edge Radial Cracks on an Orthotropic Thick-walled Cylinder Subjected to Internal Pressure using the Average Stress [Volume 14, Issue 2, 2013, Pages 98-109]
Barati, Hossein A Hybrid Contactless Air-magnetic Bearing System for Operating at 15,000 rpm [Volume 25, Issue 2, 2024, Pages 40-62]
Basiri, M. Rapid Subsonic Flutter Analysis for Low Aspect Ratio Composite Wings [Volume 23, Issue 1, 2022, Pages 68-86]
Bastanfar, Marzieh Cracked piezoelectric layer bounded between two orthotropic half-planes [Volume 19, Issue 1, 2018, Pages 79-98]
Bateni, M. Coupled Thermoelasticity of FGM Truncated Conical Shells [Volume 22, Issue 1, 2021, Pages 127-142]
Bayati Nezhad, M.A Prediction of the Remaining useful Life of the Rolling Element Bearings using Recurrent Neural Network [Volume 21, Issue 2, 2020]
Behjat, B. Finite Element Analysis of Functionally Graded Piezoelectric Beams [Volume 11, Issue 1, 2010, Pages 45-73]
Behzad, E. A Hybrid Method for Prediction of Lean Blow Out in a Turbine Engine Combustion Chamber [Volume 22, Issue 2, 2021, Pages 54-70]
Bigdeloo, Fatemeh Stabilization of Intrusive DMD based Reduced Order Model of the Convection-diffusion Equations [Volume 25, Issue 1, 2024, Pages 41-64]
Boustani, Esmail The Exergy Optimization of a Flat-Plate Solar Collector Using AL2O3-Water, CuO-Water and TiO2-Water Nanofluids by Genetic Algorithm [Volume 17, Issue 2, 2016, Pages 5-18]
Boyaghchi, F. AhmadiThermodynamic Assessment and Parametric Study of a Supercritical Thermal Power Plant [Volume 13, Issue 2, 2012, Pages 59-80]
C
Chaibakhsh, Ali Model-based Approach for Multi-sensor Fault Identification in Power Plant Gas Turbines [Volume 21, Issue 1, 2020, Pages 65-86]
Chakerizade, A. Influence Of Coiled Wire Presence On The Convective Heat Transfer Coefficients In R-600 Condensers [Volume 22, Issue 1, 2021, Pages 42-53]
Cheloee Darabi, A. Linear Thermoplastic Analysis of FGM Rotating Discs with Variable Thickness [Volume 14, Issue 2, 2013, Pages 73-87]
Cheraghpour Samavati, F. Design and Implementation of a Control Device for Intelligent Wheelchair by Combining Image Processing and Acceleration Sensor [Volume 22, Issue 2, 2021, Pages 88-105]
D
Dadi, V. Emission Performance of a Diesel Engine Running on Biodiesel Fuel at Different Compression Ratios [Volume 15, Issue 1, 2014, Pages 82-98]
Damangir, E Effect of Volute and Rotor Widths on Squirrel Cage Fan Performance and Velocity Profiles [Volume 9, Issue 2, 2020, Pages 80-97]
Daneshmehr, A.R Three-Dimensional Elasticity Solution of Single Layer Piezoelectric Panel [Volume 9, Issue 2, 2020, Pages 26-40]
Davood Abadi, A Prediction of the Remaining useful Life of the Rolling Element Bearings using Recurrent Neural Network [Volume 21, Issue 2, 2020]
Davoodbeygi, Yegane Friction-Stir-Processing Effect on Fracture Toughness of Oil Pipelines in ST 37 Group Before/After Nano ZrO2-Coating [Volume 17, Issue 1, 2016, Pages 79-95]
Davoodi Yekta, Mohammadreza Multi-objective Optimization of Two-Layer Microbeam used for Sensing of Viruses by Genetic Algorithm [Volume 24, Issue 1, 2023, Pages 70-84]
Dehbani, H. An Exact Solution for Quasi-Static Poro-Thermoelasticity in Spherical Coordin [Volume 12, Issue 1, 2011, Pages 86-108]
Dehghan, Maziar Wind farm layout optimization using a Reynolds‐averaged Navier–Stokes model and a genetic algorithm [Volume 21, Issue 2, 2020]
Dehghan Niestanak, Vahid Design and Development of an Emergency BVM-based Ventilator with 2D Look-up Table Control Algorithm [Volume 24, Issue 2, 2023, Pages 42-59]
Dehkordi, A.H Effect of Volute and Rotor Widths on Squirrel Cage Fan Performance and Velocity Profiles [Volume 9, Issue 2, 2020, Pages 80-97]
Dehnad, Masoud Designing and Calibrating of a Millinewton Measurement System for Thermal-vacuum Conditions [Volume 25, Issue 1, 2024, Pages 89-111]
Dolatabadi, N. A Linear Approach to the Control of Vortex Induced Vibrations of Circular Cylinders with a 2-D Van der Pol Model for Structural Oscillator [Volume 12, Issue 2, 2011, Pages 54-72]
Dorali, M.R. Mechanical Behaviour of Femoral Diaphyseal Cortical Bone using the Computed Tomography Data: A Numerical Investigation [Volume 22, Issue 2, 2021, Pages 5-20]
Doustdar, M. M. Parametric Study of Fuel Vapor Concentration Distribution Due to Vaporization of Fuel Droplets in Free Atmosphere [Volume 10, Issue 1, 2009, Pages 23-36]
E
Ebrahimi, B Nonlinear Non-minimum Phase Flight Vehicle Control Using Dynamic Sliding Manifold [Volume 9, Issue 2, 2020, Pages 42-58]
Ebrahimi, Reza Wind farm layout optimization using a Reynolds‐averaged Navier–Stokes model and a genetic algorithm [Volume 21, Issue 2, 2020]
Ebrahimi-Nejad Rafsanjani, S. Optimizing the Characteristics of the Motion of Steel Balls and their Impact on Shell Liners in SAG Mills [Volume 10, Issue 1, 2009, Pages 5-22]
Eghbali, Akbar Numerical Simulation of the Saline Water Electrolysis Process using Electromagnetic Waves [Volume 24, Issue 2, 2023, Pages 104-141]
Eghbalian, Hirad Dynamic Coupled Thermo-Viscoelasticity of a Spherical Hollow Domain [Volume 17, Issue 1, 2016, Pages 96-110]
Ehteram, H. R. Effect of Magnetic Field on Heat Transfer of Nanofluid with Variable Properties on the Inclined Enclosure [Volume 15, Issue 1, 2014, Pages 28-38]
Ehyaei, Javad Vibration analysis of a double layer microshell utilizing a modified couple stress theory [Volume 21, Issue 1, 2020, Pages 21-44]
Ehyaei, Javad Coupler-curve Optimization of Planar Four Bar Mechanism Based on an Analytical Method [Volume 25, Issue 1, 2024, Pages 112-129]
Eliasi, H. Coupled Thermoelasticity of FGM Truncated Conical Shells [Volume 22, Issue 1, 2021, Pages 127-142]
Eliasi, Hossein Nonlinear Coupled Thermoelasticity of Cylindrical Shells Resting on Elastic Foundation [Volume 25, Issue 2, 2024, Pages 6-25]
Eltawwab, Ali Influence of Biodiesel from Egyptian Used Cooking Oils on Performance and Emissions of Diesel Engine [Volume 18, Issue 1, 2017, Pages 65-80]
Emamifar, Armin Thermodynamic evaluation of a transcritical CO2 refrigeration system equipped with ORC, mechanical subcooling and expander [(Articles in Press)]
Eslami, M. R.Thermoelastic Analysis in Thick FGM Cylinders with Extended Profile [Volume 12, Issue 2, 2011, Pages 73-91]
Eslami, M. R.Thermomechanical Buckling of Simply Supported Shallow FGM Spherical Shells with Temperature dependent Material [Volume 11, Issue 2, 2010, Pages 39-65]
Eslami, M. R.Finite Element Analysis of Functionally Graded Piezoelectric Beams [Volume 11, Issue 1, 2010, Pages 45-73]
Eslami, Mohammad reza Mechanical and Thermal Stresses In a Linear Plastic FGM Hollow Cylinder Due to Axisymmetric Loads [Volume 16, Issue 2, 2015, Pages 39-65]
Eslami, Mohammad Reza Thermal Buckling of Functionally Graded Beams [Volume 10, Issue 2, 2009, Pages 65-81]
Eslami, Mohammad Reza Mechanical Buckling of FG Saturated Porous Rectangular Plate under Temperature Field [Volume 17, Issue 1, 2016, Pages 61-78]
Eslami, Mohammad Reza Dynamic Coupled Thermo-Viscoelasticity of a Spherical Hollow Domain [Volume 17, Issue 1, 2016, Pages 96-110]
Eslami, Mohammad Reza Cyclic Behavior of Beams Based on the Chaboche Unified Viscoplastic Model [Volume 18, Issue 2, 2017, Pages 63-81]
Eslami, Mohammad Reza Nonlinear Coupled Thermoelasticity of Cylindrical Shells Resting on Elastic Foundation [Volume 25, Issue 2, 2024, Pages 6-25]
Eslami, Mohammad Reza Thermoelasticity of Functionally Graded Cylindrical Shells under Axisymmetric Partial Thermal Shock [Volume 26, Issue 1, 2025, Pages 6-30]
Eslami, M. R. A shell superelement for mechanical analysis of cylindrical structures [Volume 22, Issue 1, 2021, Pages 90-107]
Eslami, M. R. Coupled Thermoelasticity of FGM Truncated Conical Shells [Volume 22, Issue 1, 2021, Pages 127-142]
Etemadi, S. Variable Structure Behavioural Controller for Multi-agent Systems [Volume 10, Issue 2, 2009, Pages 49-63]
Eynalvandpour, A. Eulerian simulation of bubble columns reactors and effect of various parameters on the gas holdup [Volume 13, Issue 1, 2012, Pages 52-67]
Ezazi, S. An Enhanced Flux Treatment in Solving Incompressible Flow in a Forward-Facing Step [Volume 11, Issue 1, 2010, Pages 34-44]
F
Fadaei Tehrani, A.R. Improving the Surface Quality using Combined Ultrasonic Vibration and Magnetic Abrasive Finishing Method [Volume 14, Issue 2, 2013, Pages 37-49]
Fahimirad, A. Comparison of Performances for Air-Standard Atkinson and Dual Combustion Cycles with Heat Transfer Considerations [Volume 13, Issue 2, 2012, Pages 5-19]
Falahi, Vahid Cyclic Behavior of Beams Based on the Chaboche Unified Viscoplastic Model [Volume 18, Issue 2, 2017, Pages 63-81]
Faraji, Javad Low-dimensional Friction Modelling with Considering Random Asperity Distributions [Volume 24, Issue 1, 2023, Pages 119-140]
Farajidavar, A. Ionic Channel Blockage Effect on the Electromechanical Model of Human Gastric Wall Smooth Muscle Cells [Volume 23, Issue 2, 2022, Pages 33-47]
Farhid, Morteza Designing and Calibrating of a Millinewton Measurement System for Thermal-vacuum Conditions [Volume 25, Issue 1, 2024, Pages 89-111]
Farrokhfal, H. Rapid Subsonic Flutter Analysis for Low Aspect Ratio Composite Wings [Volume 23, Issue 1, 2022, Pages 68-86]
Farshid Far, Anooshivan The Lock-in Phenomenon in VIV using A Modified Wake Oscillator Model for both High and Low Mass-Damping Ratio [Volume 10, Issue 2, 2009, Pages 5-28]
Farshidianfar, A. Tuned Mass Dampers for Earthquake Vibrations of High-rise Buildings using Bee Colony Optimization Technique [Volume 13, Issue 1, 2012, Pages 36-51]
Farshidianfar, A. A Linear Approach to the Control of Vortex Induced Vibrations of Circular Cylinders with a 2-D Van der Pol Model for Structural Oscillator [Volume 12, Issue 2, 2011, Pages 54-72]
Farshidianfar, A. Some New Analytical Techniques for Duffing Oscillator with Very Strong Nonlinearity [Volume 10, Issue 1, 2009, Pages 37-54]
Farsi, M.A Uncertainty Analysis of Spray Injection Process in a Model Scale Liquid Fuel Micro-Motor [Volume 21, Issue 2, 2020]
Farzaneh-Gord, M. Proposing a Novel Configuration for CGSs Aimed at Reducing Energy Consumption and Exergy Destruction [Volume 15, Issue 1, 2014, Pages 5-27]
Farzaneh-Gord, M. Fuel Consumption Minimization in Greenhouses by Employing an Innovative System Taking Advantage of Solar and Geothermal Energies [Volume 15, Issue 2, 2014, Pages 91-115]
Farzaneh-Gord, Mahmood Dynamic Modelling of a Compressed Air Energy Storage System in a Grid Connected Photovoltaic Plant [Volume 16, Issue 1, 2015, Pages 29-51]
Fattahi Avati, A. Theoretical Study of Effective Parameters in the Friction Reduction by Ultrasonic Vibrations in Solid Surfaces [Volume 23, Issue 2, 2022, Pages 129-144]
Fattahi Avati, Ali Experimental Study of Parameters Affecting Friction Reduction in Solid-Liquid Interfaces using Ultrasonic Vibrations [Volume 24, Issue 1, 2023, Pages 85-98]
Fazli, Asghar Geometry Improvement of an Asymmetric S-shaped Intake with a Combination of Artificial Neural Networks and Genetic Algorithm [Volume 26, Issue 1, 2025, Pages 130-161]
Fereidoonnezhad, B. A fiber-reinforced Transversely Isotropic Constitutive Model for Liver Tissue [Volume 14, Issue 2, 2013, Pages 88-97]
Fooladi-Mahani, M. Optimizing the Characteristics of the Motion of Steel Balls and their Impact on Shell Liners in SAG Mills [Volume 10, Issue 1, 2009, Pages 5-22]
Fouladi, N. One Dimensional Internal Ballistics Simulation of Solid Rocket Motor [Volume 14, Issue 1, 2013, Pages 5-16]
Garousi, Morteza Simultaneous estimation of heat fluxes applied to the wall of a channel with turbulent flow using inverse analysis [Volume 20, Issue 2, 2019, Pages 42-74]
Geramizadeh, Hosein Design and Analysis of Impact Attenuator for Formula Student Car [(Articles in Press)]
Ghadam, F. New Correlations for the Prediction of Terminal Velocity and Drag Coefficient of a Bubble Rising [Volume 22, Issue 2, 2021, Pages 71-87]
Ghadamian, Hossein Thermo-economic analysis of absorption chiller integrated with a GE-F5 gas turbine for power enhancement (Zanbagh power plant, studied case) [Volume 19, Issue 1, 2018, Pages 20-33]
Ghadimi, Mojtaba Elasto-plastic Analysis of Thick Cylinders using Shear Deformation Theories and Radial Return Mapping Method [Volume 25, Issue 2, 2024, Pages 93-113]
Ghaffari, A. Model Predictive Control System Design using ARMAX Identification Method for Car-following Behavior [Volume 14, Issue 1, 2013, Pages 48-71]
Ghaffari, A. Modeling and Intelligent Control System Design for Overtaking Maneuver in Autonomous Vehicles [Volume 13, Issue 1, 2012, Pages 68-87]
Ghaffari, Ali Model-based Approach for Multi-sensor Fault Identification in Power Plant Gas Turbines [Volume 21, Issue 1, 2020, Pages 65-86]
Ghaffari Some’e, H. Calculating Stress Intensity Factor for Small Edge Radial Cracks on an Orthotropic Thick-walled Cylinder Subjected to Internal Pressure using the Average Stress [Volume 14, Issue 2, 2013, Pages 98-109]
Ghafori, H. Experimental investigation of Convective Heat Transfer of Carbon Nanotubes / Water Flow in a helical Triple tube Heat Exchanger [Volume 22, Issue 2, 2021, Pages 106-115]
Ghanadi Azar, Roozbeh A Modeling Framework for Rigid Legs Passive Dynamic Biped Walkers in MSC ADAMS [Volume 26, Issue 2, 2025, Pages 72-92]
Ghannad, Mehdi Elasto-plastic Analysis of Thick Cylinders using Shear Deformation Theories and Radial Return Mapping Method [Volume 25, Issue 2, 2024, Pages 93-113]
Ghannad, Mehdi Analytical Solution for Buckling Analysis of FGM Axisymmetric Cylindrical Shell under Axial Load using Shear Deformation Theory and Perturbation Technique [Volume 26, Issue 2, 2025, Pages 111-134]
Ghannad, Mehdi Perturbation technique in thermoelastic analysis of thick cylinders under various boundary conditions using shear deformation and temperature theories [(Articles in Press)]
Ghasemi, Majid Numerical Simulation of Blood Flow Mixed with Magnetic Nanoparticles under the Influence of AC and DC Magnetic Field [Volume 15, Issue 1, 2014, Pages 68-81]
Ghassemi, M. Investigation of the Effects of Temperature, Mass Flow Rate of the Injected Fuel, Pore Diameter, Porosity and Ambient Pressure on the Amount of Pollutants in the Combustion Chamber [Volume 23, Issue 1, 2022, Pages 122-146]
Ghassemi, Majid Investigating the Impact of Geometric Parameters on Radial Fan Performance [Volume 25, Issue 1, 2024, Pages 6-20]
Ghazali, Majid Damage Detection using Machine Learning: A Comparative Analysis for Dimensionality Reduction and Classification Techniques [Volume 26, Issue 1, 2025, Pages 84-113]
Ghazizadeh, H. Modeling Diffusion to Thermal Wave Heat Propagation by Using Fractional Heat Conduction Constitutive Model [Volume 11, Issue 2, 2010, Pages 66-80]
Ghazizadeh, H. R.Hybrid differential transform-finite difference solution of 2D transient nonlinear annular fin equation [Volume 11, Issue 1, 2010, Pages 5-20]
Ghezelbash, R. Fuel Consumption Minimization in Greenhouses by Employing an Innovative System Taking Advantage of Solar and Geothermal Energies [Volume 15, Issue 2, 2014, Pages 91-115]
Gholipoor, Ahad Comparative study of ultrasonic vibrations assisted EDM and magnetic field assisted EDM processes [Volume 21, Issue 1, 2020, Pages 45-64]
Gholipour, Farid Experimental Investigation of Injection Pattern Effect on Tensile Strength of PLA Material in FDM Processes [Volume 26, Issue 2, 2025, Pages 51-71]
Ghorbanpour Arani, Ali Vibration analysis of coupled double-nanocomposite microplate-systems [Volume 16, Issue 1, 2015, Pages 5-28]
Ghorbanpour Arani, Ali Elasticity Solution Approach for Functionally Graded Spherical Shell with Piezoelectric Properties [Volume 18, Issue 1, 2017, Pages 103-123]
Ghotbinasab, Samira Effects of Bronze Element Surface on Bubble Departure Size in Pool Boiling and its Prediction through ANN and GA Approaches [Volume 24, Issue 1, 2023, Pages 15-39]
H
Habibi, MohammadReza Introduced a Modified Set of Boundary Condition of Lattice Boltzmann Method Based on Bennett extension in Presence of Buoyancy Term Considering Variable Diffusion Coefficients [Volume 18, Issue 2, 2017, Pages 5-22]
Hafezalkotob, A. Thermomechanical Buckling of Simply Supported Shallow FGM Spherical Shells with Temperature dependent Material [Volume 11, Issue 2, 2010, Pages 39-65]
Haghaiegh, S. Prediction of Surface Roughness by Hybrid Artificial Neural Network and Evolutionary Algorithms in End Milling [Volume 15, Issue 1, 2014, Pages 39-47]
Haghgoo, M. R.Modeling of Upward Subcooled Flow Boiling of Refrigerant-113 in a Vertical Annulus [Volume 12, Issue 1, 2011, Pages 19-40]
Haghighat, H. A generalized upper bound solution for bimetallic rod extrusion through arbitrarily curved dies [Volume 13, Issue 1, 2012, Pages 23-35]
Haghighat, Heshmat Allah On the optimum die angle in rod drawing process considering strain-hardening effect of material [Volume 20, Issue 1, 2019, Pages 113-128]
Haghjoo, Mohammad Reza A Modeling Framework for Rigid Legs Passive Dynamic Biped Walkers in MSC ADAMS [Volume 26, Issue 2, 2025, Pages 72-92]
Hajipour, A. Comparison of Performances for Air-Standard Atkinson and Dual Combustion Cycles with Heat Transfer Considerations [Volume 13, Issue 2, 2012, Pages 5-19]
Hamedi, J. Modeling and Wrench Feasible Workspace Analysis of a Cable Suspended Robot for Heavy Loads Handling [Volume 10, Issue 2, 2009, Pages 29-48]
Hamediestakhrsar, M.H. Numerical Investigation of the Circumferential Angle of the Axisymmetric Bypass Dual Throat Nozzle [Volume 22, Issue 1, 2021, Pages 143-154]
Harifi, Abbas Robust sliding mode control of uncertain nonlinear ship autopilot system [Volume 21, Issue 2, 2020]
Hasanlu, Mojtaba Vibration Attenuation Timoshenko Beam Based on Optimal Placement Sensors/Actuators PZT Patches with LQR-MOPSO [Volume 17, Issue 1, 2016, Pages 26-60]
Hashemi, Seyyed Mohammad Moein Transient Response of a Functionally Graded Piezoelectric Rectangular Plane with Multiple Cracks under Electromechanical Impacts [Volume 24, Issue 1, 2023, Pages 40-69]
Hashemi, SH. Residual Stress Assessment in Spiral Steel Pipe with the Grade of API-X65 after Submerged Arc-welding [Volume 23, Issue 1, 2022, Pages 5-29]
Hashemi, Soheil Nonlinear vibration analysis of functionally graded plate in contact with fluid: Analytical study [Volume 21, Issue 1, 2020, Pages 110-134]
Hashemi, Soheil An analytical study for nonlinear vibration analysis of two-directional functionally graded rectangular plate [Volume 21, Issue 2, 2020]
Hassani, Alireza Crack analysis of an orthotropic circular bars reinforced by a magnetic coating under Saint-Venant torsion [Volume 20, Issue 2, 2019, Pages 87-111]
Hassani, Mohammad Computation of SIF for Several Moving Cracks in an Orthotropic Layer Bonded to a Functionally Graded Piezoelectric Coating [Volume 26, Issue 2, 2025, Pages 35-56]
Hatefkia, Atefeh Mechanical and Thermal Stresses In a Linear Plastic FGM Hollow Cylinder Due to Axisymmetric Loads [Volume 16, Issue 2, 2015, Pages 39-65]
Heidari, Hamidreza The effect of support parameters on the force transmissibility of a flexible rotor [Volume 20, Issue 2, 2019, Pages 28-41]
Heirani, Hasan A Comparison of Corrosion Behavior of Coarse and Ultrafine Grain Commercially Pure Titanium in Simulated Body Fluid [Volume 26, Issue 1, 2025, Pages 114-129]
Heydari, P. Evaluation and Simulation of Performance, Environmental and Economic Aspects of 1MW Photovoltaic Powerplant and Comparison with an Operational Powerplant [Volume 23, Issue 1, 2022, Pages 101-121]
Hormozi, Faramarz Experimental Design by using Taguchi Method for Sensitivity Analysis of CuO/Deionized Water Nanofluid Properties [Volume 24, Issue 2, 2023, Pages 5-41]
Hosein Ali Poor, Seyed Mostafa Parametric Study of Fuel Vapor Concentration Distribution Due to Vaporization of Fuel Droplets in Free Atmosphere [Volume 10, Issue 1, 2009, Pages 23-36]
Hosseinalipour, S. M. Parametric Study of Fuel Vapor Concentration Distribution Due to Vaporization of Fuel Droplets in Free Atmosphere [Volume 10, Issue 1, 2009, Pages 23-36]
Hosseini Hashemi, Sh. Low Velocity Impact on Relatively Thick Rectangular Plate under In-plane Loads Resting on Pasternak Elastic Foundation [Volume 12, Issue 1, 2011, Pages 41-67]
Hosseinpour, Mahdi The Optimum Design of an Anti-vibration Boring Bar by Improving Dynamic Characteristics [Volume 26, Issue 1, 2025, Pages 31-43]
J
Jabbari, M. An Exact Solution for Quasi-Static Poro-Thermoelasticity in Spherical Coordin [Volume 12, Issue 1, 2011, Pages 86-108]
Jabbari, M. Mechanical Buckling of FG Saturated Porous Rectangular Plate with Piezoelectric Actuators [Volume 17, Issue 2, 2016, Pages 46-66]
Jabbari, mohsen Mechanical Buckling of FG Saturated Porous Rectangular Plate under Temperature Field [Volume 17, Issue 1, 2016, Pages 61-78]
Jabbari, Mohsen Mechanical and Thermal Stresses In a Linear Plastic FGM Hollow Cylinder Due to Axisymmetric Loads [Volume 16, Issue 2, 2015, Pages 39-65]
Jafari, A. A. Nonlinear Vibration of Functionally Graded Cylindrical Shells under Radial Harmonic Load [Volume 13, Issue 2, 2012, Pages 20-34]
Jafari, Ali Asghar Vibration analysis of a rectangular composite plate in contact with fluid [Volume 17, Issue 2, 2016, Pages 67-83]
Jafari, Ali Asghar Nonlinear vibration analysis of functionally graded plate in contact with fluid: Analytical study [Volume 21, Issue 1, 2020, Pages 110-134]
Jafari, Ali Asghar An analytical study for nonlinear vibration analysis of two-directional functionally graded rectangular plate [Volume 21, Issue 2, 2020]
Jafari, Peymaan Wheelchair stabilization by the control of a spatial 3-RRS mechanism [Volume 17, Issue 2, 2016, Pages 84-100]
Jafari-Nadoushan, Mahdi Coordinated Landing Control of Multiple Vehicles using Rough Neural Network and Sliding Mode Methods [Volume 26, Issue 2, 2025, Pages 93-110]
Jafarnia Dabanloo, N. Ionic Channel Blockage Effect on the Electromechanical Model of Human Gastric Wall Smooth Muscle Cells [Volume 23, Issue 2, 2022, Pages 33-47]
Jafarzadeh, A. A shell superelement for mechanical analysis of cylindrical structures [Volume 22, Issue 1, 2021, Pages 90-107]
Jahdi, M.H. Capturing of Shock Wave of Supersonic Flow over the Bump Channel with TVD, ACM and Jameson Methods [Volume 22, Issue 1, 2021, Pages 108-126]
Jahromi, M. A Hybrid Method for Prediction of Lean Blow Out in a Turbine Engine Combustion Chamber [Volume 22, Issue 2, 2021, Pages 54-70]
Jahromi, Mehdi Analysing Jet Trainer Engine Performance During Steady-State and Transient Process Under Varying Humidity Conditions [(Articles in Press)]
Jaiyesimi, Lawrence Transient Three-Dimensional Thermal Analysis of a Slab with internal heat generation and heated by a Point Moving Heat Source [Volume 18, Issue 1, 2017, Pages 43-64]
Jalili, F. A New Modified Harmony Search Optimization Algorithm for Evaluating Airfoil Shape Parameterization Methods and Aerodynamic Optimization [Volume 23, Issue 2, 2022, Pages 80-104]
Javadi, M. Effect of Selecting the Suitable Design on Production Costs of Pressure Vessels [Volume 23, Issue 2, 2022, Pages 48-62]
Javadi, Mehrdad Wheelchair stabilization by the control of a spatial 3-RRS mechanism [Volume 17, Issue 2, 2016, Pages 84-100]
Javanshir, Khodabakhsh A Novel Switching Control Scheme for Rehabilitation of the Lower Limbs of a Human Body [Volume 25, Issue 1, 2024, Pages 65-88]
Jayesimi, Lawrence OlumideAnalysis of squeezing flow of viscous fluid under the influence of slip and magnetic field: comparative studies of different approximate analytical methods [Volume 20, Issue 2, 2019, Pages 5-27]
Jedari Salami, Sattar Design and Analysis of Impact Attenuator for Formula Student Car [(Articles in Press)]
K
Kabganian, M Fuzzy Variable-Length Sliding Window Blockwise Least Square Algorithm with Application to Vehicle Heading Determination [Volume 9, Issue 2, 2020, Pages 59-79]
Kadkhodaei, M. Experimental Study on the Magnetomechanical Characteristics of Ni-Mn-Ga Ferromagnetic Shape Memory Alloy Single Crystals [Volume 14, Issue 1, 2013, Pages 72-84]
Kadkhodayan, M. A Closed-form Semi-analytical Elastic-Plastic Solution for Predicting the Onset of Flange Wrinkling in Deep-drawing of a Two-layered Circular Plate [Volume 14, Issue 2, 2013, Pages 5-36]
Kalhor, R. Low Velocity Impact on Relatively Thick Rectangular Plate under In-plane Loads Resting on Pasternak Elastic Foundation [Volume 12, Issue 1, 2011, Pages 41-67]
Kamali, Ali On the Corotational Beam Element Formulation in Large Deformation Analysis [Volume 19, Issue 2, 2018, Pages 94-115]
Kameli, P. Experimental Study on the Magnetomechanical Characteristics of Ni-Mn-Ga Ferromagnetic Shape Memory Alloy Single Crystals [Volume 14, Issue 1, 2013, Pages 72-84]
Kamgar, S. Emission Performance of a Diesel Engine Running on Biodiesel Fuel at Different Compression Ratios [Volume 15, Issue 1, 2014, Pages 82-98]
Karafi, Mohammad Reza Experimental Study of Parameters Affecting Friction Reduction in Solid-Liquid Interfaces using Ultrasonic Vibrations [Volume 24, Issue 1, 2023, Pages 85-98]
Karafi, Mohammad Reza Numerical Simulation of the Saline Water Electrolysis Process using Electromagnetic Waves [Volume 24, Issue 2, 2023, Pages 104-141]
Karafi, Mohammad Reza A Hybrid Contactless Air-magnetic Bearing System for Operating at 15,000 rpm [Volume 25, Issue 2, 2024, Pages 40-62]
Karafi, M.R. Theoretical Study of Effective Parameters in the Friction Reduction by Ultrasonic Vibrations in Solid Surfaces [Volume 23, Issue 2, 2022, Pages 129-144]
Karamooz Mahdiabadi, Morteza Damage Detection using Machine Learning: A Comparative Analysis for Dimensionality Reduction and Classification Techniques [Volume 26, Issue 1, 2025, Pages 84-113]
Karamoozravari, Mohammad Reza Elastoplastic Analysis of Rotating Disk of Variable Thickness Made of Functionally Graded Materials [Volume 24, Issue 1, 2023, Pages 99-118]
Karimi, Mahdi Thermoelasticity of Functionally Graded Cylindrical Shells under Axisymmetric Partial Thermal Shock [Volume 26, Issue 1, 2025, Pages 6-30]
Karimi, S. New Correlations for the Prediction of Terminal Velocity and Drag Coefficient of a Bubble Rising [Volume 22, Issue 2, 2021, Pages 71-87]
Kassa, Ephrem ZelekeDesign and Modification of One Arm Driven Manual Hemiplegic Wheelchair [Volume 19, Issue 1, 2018, Pages 63-78]
Kassaei, F. Numerical Modeling and Analysis of the Performance of a Stepped Solar Still using Multi-phase Method [Volume 23, Issue 1, 2022, Pages 87-100]
Kebriaee, Azadeh Implementation of Local Chemiluminescence Method on a Premixed Laminar Propane/Air Flame [Volume 25, Issue 2, 2024, Pages 66-77]
Keighobadi, J Fuzzy Variable-Length Sliding Window Blockwise Least Square Algorithm with Application to Vehicle Heading Determination [Volume 9, Issue 2, 2020, Pages 59-79]
Kermanian, Ali On the Corotational Beam Element Formulation in Large Deformation Analysis [Volume 19, Issue 2, 2018, Pages 94-115]
Keshavarz, Arash An experimental study on effects of opening on buckling of FML plates reinforced with basalt [Volume 20, Issue 2, 2019, Pages 112-124]
Khakzari, Zohreh Stabilization of Intrusive DMD based Reduced Order Model of the Convection-diffusion Equations [Volume 25, Issue 1, 2024, Pages 41-64]
Khalaj Amineh, S. Improving the Surface Quality using Combined Ultrasonic Vibration and Magnetic Abrasive Finishing Method [Volume 14, Issue 2, 2013, Pages 37-49]
Khaleghi, Ali Simultaneous estimation of heat fluxes applied to the wall of a channel with turbulent flow using inverse analysis [Volume 20, Issue 2, 2019, Pages 42-74]
Khalili, S. M. R. Nonlinear Vibration of Functionally Graded Cylindrical Shells under Radial Harmonic Load [Volume 13, Issue 2, 2012, Pages 20-34]
Kharazmi, Mehdi Low-dimensional Friction Modelling with Considering Random Asperity Distributions [Volume 24, Issue 1, 2023, Pages 119-140]
Khazaee, Mostafa Analysing Jet Trainer Engine Performance During Steady-State and Transient Process Under Varying Humidity Conditions [(Articles in Press)]
Kheiri Khah, Mohammad Mehdi Optimization of fuzzy controller for an SMA-actuated artificial finger robot [Volume 21, Issue 1, 2020, Pages 135-149]
Kheirkhah, M. M.Design, Fabrication and Intelligent Control of the Gripper Based on SMA Actuators [Volume 15, Issue 2, 2014, Pages 59-77]
Khodadadi, Mahdieh Experimental investigation for wake of the circular cylinder by attaching different number of tripping wires [Volume 17, Issue 1, 2016, Pages 5-25]
Khodayari, A. Design, Fabrication and Intelligent Control of the Gripper Based on SMA Actuators [Volume 15, Issue 2, 2014, Pages 59-77]
Khodayari, A. R.Optimization of fuzzy controller for an SMA-actuated artificial finger robot [Volume 21, Issue 1, 2020, Pages 135-149]
Khodayari, Alireza A New Model of Car Following Behavior Based on Lane Change Effects Using Anticipation and Evaluation Idea [Volume 16, Issue 2, 2015, Pages 26-38]
Khodayari, Alireza Detection and Recognition of Multi-language Traffic Sign Context by Intelligent Driver Assistance Systems [Volume 20, Issue 2, 2019, Pages 125-136]
Khodayari, A. R. Modeling and Intelligent Control System Design for Overtaking Maneuver in Autonomous Vehicles [Volume 13, Issue 1, 2012, Pages 68-87]
Khodayari, A.R. Model Predictive Control System Design using ARMAX Identification Method for Car-following Behavior [Volume 14, Issue 1, 2013, Pages 48-71]
Khodsiani, Milad Thermo-economic analysis of absorption chiller integrated with a GE-F5 gas turbine for power enhancement (Zanbagh power plant, studied case) [Volume 19, Issue 1, 2018, Pages 20-33]
Khooshehchin, Mohsen Effects of Bronze Element Surface on Bubble Departure Size in Pool Boiling and its Prediction through ANN and GA Approaches [Volume 24, Issue 1, 2023, Pages 15-39]
Khoramdel, K. Simulating Cooling Injection Effect of Trailing Edge of Gas Turbine Blade on Surface Mach Number Distribution of Blade [Volume 15, Issue 1, 2014, Pages 48-67]
Khoran, Eisa Friction stir spot welding of polycarbonate by a new design tool [Volume 16, Issue 2, 2015, Pages 66-76]
Khoran, Mohammad Friction stir spot welding of polycarbonate by a new design tool [Volume 16, Issue 2, 2015, Pages 66-76]
Khorasanizadeh, H. Effect of Magnetic Field on Heat Transfer of Nanofluid with Variable Properties on the Inclined Enclosure [Volume 15, Issue 1, 2014, Pages 28-38]
Khorsand, M. Thermo-elastic analysis of a functionally graded thick sphere by differential quadrature method [Volume 12, Issue 2, 2011, Pages 27-43]
Khorsandi, K. Design and Implementation of a Control Device for Intelligent Wheelchair by Combining Image Processing and Acceleration Sensor [Volume 22, Issue 2, 2021, Pages 88-105]
KhorsandiJou, Mahdi Wheelchair stabilization by the control of a spatial 3-RRS mechanism [Volume 17, Issue 2, 2016, Pages 84-100]
Khorshidvand, Ahmad reza Free vibration analysis of functionally graded rectangular plates via differential quadrature method [Volume 20, Issue 1, 2019, Pages 46-70]
Kiani, Mohammad aminHollow Piezoelectric Cylinder under Transient Loads [Volume 18, Issue 2, 2017, Pages 23-38]
Koohi, R. Rapid Subsonic Flutter Analysis for Low Aspect Ratio Composite Wings [Volume 23, Issue 1, 2022, Pages 68-86]
Kordbacheh, M. Application of Wavelet Transform as a Signal Processing Method for Defect Detection using Lamb Waves: Experimental Verification [Volume 13, Issue 2, 2012, Pages 81-95]
Kouhi, E. Experimental Investigation of the Flow Structure around a Pitching Airfoil by Mean and Instantaneous Data [Volume 23, Issue 2, 2022, Pages 5-32]
Kouhi, H. Variable Structure Behavioural Controller for Multi-agent Systems [Volume 10, Issue 2, 2009, Pages 49-63]
Koury, R. Proposing a Novel Configuration for CGSs Aimed at Reducing Energy Consumption and Exergy Destruction [Volume 15, Issue 1, 2014, Pages 5-27]
Koury, Ricardo N.N.Dynamic Modelling of a Compressed Air Energy Storage System in a Grid Connected Photovoltaic Plant [Volume 16, Issue 1, 2015, Pages 29-51]
M
Maererfat, M. Hybrid differential transform-finite difference solution of 2D transient nonlinear annular fin equation [Volume 11, Issue 1, 2010, Pages 5-20]
Mahbadi, H. Calculating Stress Intensity Factor for Small Edge Radial Cracks on an Orthotropic Thick-walled Cylinder Subjected to Internal Pressure using the Average Stress [Volume 14, Issue 2, 2013, Pages 98-109]
Mahbadi, H. Elastoplastic Analysis of Functionally Graded Beams under Mechanical Loads [Volume 13, Issue 2, 2012, Pages 35-58]
Mahbadi, H. Stress Intensity Factor of Radial Cracks for Rotating Disks and Cylinders using Average Stress Method [Volume 13, Issue 1, 2012, Pages 88-103]
Mahbadi, H. Mechanical Behaviour of Femoral Diaphyseal Cortical Bone using the Computed Tomography Data: A Numerical Investigation [Volume 22, Issue 2, 2021, Pages 5-20]
Mahbadi, Hossein Cyclic Behavior of Beams Based on the Chaboche Unified Viscoplastic Model [Volume 18, Issue 2, 2017, Pages 63-81]
Mahbadi, Hossein Effect of temperature on free vibration of functionally graded microbeams [Volume 19, Issue 1, 2018, Pages 5-19]
Mahboubi Nasrekani, Farid Analytical Solution for Buckling Analysis of FGM Axisymmetric Cylindrical Shell under Axial Load using Shear Deformation Theory and Perturbation Technique [Volume 26, Issue 2, 2025, Pages 111-134]
Mahdavi, E. Linear Thermoplastic Analysis of FGM Rotating Discs with Variable Thickness [Volume 14, Issue 2, 2013, Pages 73-87]
Mahdavi, M.M. On the optimum die angle in rod drawing process considering strain-hardening effect of material [Volume 20, Issue 1, 2019, Pages 113-128]
Mahdavinejad, Rameanali Numerical Analysis of Composite Beams with Piezoelectric Actuators [Volume 26, Issue 2, 2025, Pages 135-148]
Mahdavy-Moghaddam, H. Numerical Investigation of the Circumferential Angle of the Axisymmetric Bypass Dual Throat Nozzle [Volume 22, Issue 1, 2021, Pages 143-154]
Mahdi, Miralam Numerical Study of the tongue geometry effects on the cavitation and performance of a centrifugal pump in off-design conditions [Volume 21, Issue 1, 2020, Pages 87-109]
Mahmoodi, M. Simulating Cooling Injection Effect of Trailing Edge of Gas Turbine Blade on Surface Mach Number Distribution of Blade [Volume 15, Issue 1, 2014, Pages 48-67]
Mahmoodi, M. Numerical Simulation of Beta Type Stirling Engine Considering Heat and Power Losses [Volume 15, Issue 2, 2014, Pages 5-27]
Mahmoodi, Mohammad Mostafa Geometry Improvement of an Asymmetric S-shaped Intake with a Combination of Artificial Neural Networks and Genetic Algorithm [Volume 26, Issue 1, 2025, Pages 130-161]
Mahmoodi, Moslem Perturbation technique in thermoelastic analysis of thick cylinders under various boundary conditions using shear deformation and temperature theories [(Articles in Press)]
Mahmoodi, Mostafa Analysing Jet Trainer Engine Performance During Steady-State and Transient Process Under Varying Humidity Conditions [(Articles in Press)]
Mahmoudi, M. Mechanical Behaviour of Femoral Diaphyseal Cortical Bone using the Computed Tomography Data: A Numerical Investigation [Volume 22, Issue 2, 2021, Pages 5-20]
Mahmoudi Monfared, Mojtaba Analysis of Multiple Yoffe-type Moving Cracks in an Orthotropic Half-Plane under Mixed Mode Loading Condition [Volume 18, Issue 2, 2017, Pages 39-62]
Mahmoudi Monfared, Mojtaba Computation of SIF for Several Moving Cracks in an Orthotropic Layer Bonded to a Functionally Graded Piezoelectric Coating [Volume 26, Issue 2, 2025, Pages 35-56]
Malek Jafarian, S.M. Study of flow over bluff bodies using combination of FD-CVC methods [Volume 22, Issue 2, 2021, Pages 38-53]
MalekJafarian, S. M. A New Modified Harmony Search Optimization Algorithm for Evaluating Airfoil Shape Parameterization Methods and Aerodynamic Optimization [Volume 23, Issue 2, 2022, Pages 80-104]
Mamouri, Amir RezaExperimental investigation for wake of the circular cylinder by attaching different number of tripping wires [Volume 17, Issue 1, 2016, Pages 5-25]
Mamouri, Amir Experimental Investigation of wake on an elliptic cylinder in the presence of tripping wire [Volume 18, Issue 1, 2017, Pages 81-102]
Mamouri, Amir Reza Stability investigation of hydraulic interconnected suspension system of a vehicle with a quaternion neural network controller [Volume 20, Issue 1, 2019, Pages 129-151]
Mardani, Morteza Modeling the Effects of Geometric Asymmetry on Aero-heating of the Ablative Noses [Volume 17, Issue 2, 2016, Pages 101-120]
Marefat, M. Modeling Diffusion to Thermal Wave Heat Propagation by Using Fractional Heat Conduction Constitutive Model [Volume 11, Issue 2, 2010, Pages 66-80]
Maroofiazar, Rasool Experimental Study on the Effect of Magnetic Field on Critical Heat Flux of Ferrofluid Flow Boiling in a Vertical Tube [Volume 19, Issue 2, 2018, Pages 116-126]
Masoumi, H. A New Modified Harmony Search Optimization Algorithm for Evaluating Airfoil Shape Parameterization Methods and Aerodynamic Optimization [Volume 23, Issue 2, 2022, Pages 80-104]
Meghdari, A Dynamic and Uncertainty Analysis of an Exoskeletal Robot to Assist Paraplegics Motion [Volume 9, Issue 2, 2020, Pages 6-25]
Mirabdolah Lavasani, Arash The Exergy Optimization of a Flat-Plate Solar Collector Using AL2O3-Water, CuO-Water and TiO2-Water Nanofluids by Genetic Algorithm [Volume 17, Issue 2, 2016, Pages 5-18]
Mirzaei, M. Analytical Modeling of Axial Collapse of Circular Hybrid Tubes [Volume 12, Issue 2, 2011, Pages 44-53]
Mirzaei, M. Multi-objective Optimization of Crashworthiness of Cylindrical Tubes as Energy Absorbers [Volume 12, Issue 1, 2011, Pages 5-18]
Mirzaei, Mehdi Time Delay Estimation and PID Controller Design using Smith Predictor for Lever Arm Platform [Volume 24, Issue 2, 2023, Pages 142-156]
Mirzaei, Mehdi Enrichment of Approximated Flexible Beam Model for Constrained Control of Vibration Suppression [Volume 25, Issue 2, 2024, Pages 114-141]
Mirzaie, Habib Free and forced vibration behavior of cylinders made of two dimensional functionally graded materials using meshless method [Volume 21, Issue 2, 2020]
Moadel, Masoud Interval-based Solar PV Power Forecasting Using MLP-NSGAII in Niroo Research Institute of Iran [Volume 18, Issue 2, 2017, Pages 82-94]
Moayyedi, Mohammad Kazem Stabilization of Intrusive DMD based Reduced Order Model of the Convection-diffusion Equations [Volume 25, Issue 1, 2024, Pages 41-64]
Moayyedian, F. A Closed-form Semi-analytical Elastic-Plastic Solution for Predicting the Onset of Flange Wrinkling in Deep-drawing of a Two-layered Circular Plate [Volume 14, Issue 2, 2013, Pages 5-36]
Modabberifar, M. Numerical Study of Flow Field in New Design Cyclones with Different Vortex Finder Shapes [Volume 23, Issue 2, 2022, Pages 63-79]
Moeeni, H. Effect of Selecting the Suitable Design on Production Costs of Pressure Vessels [Volume 23, Issue 2, 2022, Pages 48-62]
Moeini, Kourosh A Modeling Framework for Rigid Legs Passive Dynamic Biped Walkers in MSC ADAMS [Volume 26, Issue 2, 2025, Pages 72-92]
Moghadam, M. M. The Johnson-cook Constitutive Equation for Compression Behavior of the New Piston Aluminum Alloys at High Temperatures [Volume 23, Issue 1, 2022, Pages 30-45]
Mohamadi, A. Stability analysis of an axially moving thin wall conical shells made of shape memory alloy [Volume 23, Issue 2, 2022, Pages 105-128]
Mohammad, Esam Analysing Jet Trainer Engine Performance During Steady-State and Transient Process Under Varying Humidity Conditions [(Articles in Press)]
Mohammadi, A Prediction of the Remaining useful Life of the Rolling Element Bearings using Recurrent Neural Network [Volume 21, Issue 2, 2020]
Mohammadi, A. Improving the Surface Quality using Combined Ultrasonic Vibration and Magnetic Abrasive Finishing Method [Volume 14, Issue 2, 2013, Pages 37-49]
Mohammadi, Arash Introduced a Modified Set of Boundary Condition of Lattice Boltzmann Method Based on Bennett extension in Presence of Buoyancy Term Considering Variable Diffusion Coefficients [Volume 18, Issue 2, 2017, Pages 5-22]
Mohammadi, M. R. Numerical Simulation of Blood Flow Mixed with Magnetic Nanoparticles under the Influence of AC and DC Magnetic Field [Volume 15, Issue 1, 2014, Pages 68-81]
Mohammadi Daniali, Hamidreza A Novel Switching Control Scheme for Rehabilitation of the Lower Limbs of a Human Body [Volume 25, Issue 1, 2024, Pages 65-88]
Mohammadidoust, Akbar Effects of Bronze Element Surface on Bubble Departure Size in Pool Boiling and its Prediction through ANN and GA Approaches [Volume 24, Issue 1, 2023, Pages 15-39]
Mohammadpourfard, M. Eulerian simulation of bubble columns reactors and effect of various parameters on the gas holdup [Volume 13, Issue 1, 2012, Pages 52-67]
Mohammadpourfard, Mousa Experimental Study on the Effect of Magnetic Field on Critical Heat Flux of Ferrofluid Flow Boiling in a Vertical Tube [Volume 19, Issue 2, 2018, Pages 116-126]
Mohammadpourfard, Mousa Comparative study of ultrasonic vibrations assisted EDM and magnetic field assisted EDM processes [Volume 21, Issue 1, 2020, Pages 45-64]
Mohapatra, Taraprasad A review article on three fluid heat exchanger with different flow configurations [(Articles in Press)]
Moharrami, Rasoul Numerical Study of the Effect of Materials’ Plastic Behavior on Equibiaxial Residual Stress Measurement Using Indentation [Volume 19, Issue 2, 2018, Pages 78-93]
Mohieddin Ghomshei, Mohammad Monsour Free vibration analysis of thin annular plates integrated with piezoelectric layers using differential quadrature method [Volume 20, Issue 1, 2019, Pages 71-93]
Mohseni, M. Study of flow over bluff bodies using combination of FD-CVC methods [Volume 22, Issue 2, 2021, Pages 38-53]
Mohseni, yahya Design and Analysis of Impact Attenuator for Formula Student Car [(Articles in Press)]
Mojahedin, A. Mechanical Buckling of FG Saturated Porous Rectangular Plate with Piezoelectric Actuators [Volume 17, Issue 2, 2016, Pages 46-66]
Mojahedin, Arvin Mechanical Buckling of FG Saturated Porous Rectangular Plate under Temperature Field [Volume 17, Issue 1, 2016, Pages 61-78]
Mojra, Afsaneh Viscoelastic Analysis of Malignant Breast Tumors using Fractional Derivative Model and in Vitro Test Data [Volume 25, Issue 1, 2024, Pages 21-40]
Mojtahedi, M. The Johnson-cook Constitutive Equation for Compression Behavior of the New Piston Aluminum Alloys at High Temperatures [Volume 23, Issue 1, 2022, Pages 30-45]
Monfared, M. M.Mixed Mode Fracture Analysis of Multiple Interface Cracks [Volume 15, Issue 2, 2014, Pages 78-90]
Monfared, M. M. Multiple cracks in an elastic half-plane subjected to thermo-mechanical loading [Volume 17, Issue 2, 2016, Pages 19-45]
Monshizadeh, Arisa Viscoelastic Analysis of Malignant Breast Tumors using Fractional Derivative Model and in Vitro Test Data [Volume 25, Issue 1, 2024, Pages 21-40]
Montazerin, N Effect of Volute and Rotor Widths on Squirrel Cage Fan Performance and Velocity Profiles [Volume 9, Issue 2, 2020, Pages 80-97]
Moradihaji, Kowsar Investigating the Impact of Geometric Parameters on Radial Fan Performance [Volume 25, Issue 1, 2024, Pages 6-20]
Mosadegh, P. Improving the Surface Quality using Combined Ultrasonic Vibration and Magnetic Abrasive Finishing Method [Volume 14, Issue 2, 2013, Pages 37-49]
Mosayebi, M. Rapid Subsonic Flutter Analysis for Low Aspect Ratio Composite Wings [Volume 23, Issue 1, 2022, Pages 68-86]
Moshir Stekhareh, S. Gh. One Dimensional Internal Ballistics Simulation of Solid Rocket Motor [Volume 14, Issue 1, 2013, Pages 5-16]
Moslemi, Mohammadmahdi Design and Development of an Emergency BVM-based Ventilator with 2D Look-up Table Control Algorithm [Volume 24, Issue 2, 2023, Pages 42-59]
Mostofizadeh, A. R. One Dimensional Internal Ballistics Simulation of Solid Rocket Motor [Volume 14, Issue 1, 2013, Pages 5-16]
Mourad, Mohamed Influence of Biodiesel from Egyptian Used Cooking Oils on Performance and Emissions of Diesel Engine [Volume 18, Issue 1, 2017, Pages 65-80]
Mousavi, Seyed Mahmoud Multiple cracks in an elastic half-plane subjected to thermo-mechanical loading [Volume 17, Issue 2, 2016, Pages 19-45]
Mozaffari, Mohammad Hossein A Comparison of Corrosion Behavior of Coarse and Ultrafine Grain Commercially Pure Titanium in Simulated Body Fluid [Volume 26, Issue 1, 2025, Pages 114-129]
N
Naderan Tahan, Khosro The Effect of Repeated Impact Loading on Reservoir Rock Properties [Volume 21, Issue 2, 2020]
Naderan Tahan, Marzieh The Effect of Repeated Impact Loading on Reservoir Rock Properties [Volume 21, Issue 2, 2020]
Nadjafi, M Uncertainty Analysis of Spray Injection Process in a Model Scale Liquid Fuel Micro-Motor [Volume 21, Issue 2, 2020]
Naghdabadi, R. A fiber-reinforced Transversely Isotropic Constitutive Model for Liver Tissue [Volume 14, Issue 2, 2013, Pages 88-97]
Naseri, Reza A Comparison of Corrosion Behavior of Coarse and Ultrafine Grain Commercially Pure Titanium in Simulated Body Fluid [Volume 26, Issue 1, 2025, Pages 114-129]
Nazari, F. Investigation of welding parameters effects on residual stresses of resistance spot welding of AZ31 alloy [Volume 22, Issue 1, 2021, Pages 27-41]
Nazari, Mohsen Simultaneous estimation of heat fluxes applied to the wall of a channel with turbulent flow using inverse analysis [Volume 20, Issue 2, 2019, Pages 42-74]
Nazari, Sajjad Experimental Investigation of wake on an elliptic cylinder in the presence of tripping wire [Volume 18, Issue 1, 2017, Pages 81-102]
Nazaripoor, H. Numerical Study of Flow Field in New Design Cyclones with Different Vortex Finder Shapes [Volume 23, Issue 2, 2022, Pages 63-79]
Nickmehr, N. Some New Analytical Techniques for Duffing Oscillator with Very Strong Nonlinearity [Volume 10, Issue 1, 2009, Pages 37-54]
Nikkhah, M. An Exact Elastodynamic Solution for Func-tionally Graded Thick-Walled Cylinders Subjected to Dynamic Pressures [Volume 10, Issue 1, 2009, Pages 56-75]
Niknami, A. Coupled Thermoelasticity Impact Response Analysis of Composite Plates with SMA Wires in Thermal Environments [Volume 16, Issue 1, 2015, Pages 73-96]
Nikookar, Ali Interval-based Solar PV Power Forecasting Using MLP-NSGAII in Niroo Research Institute of Iran [Volume 18, Issue 2, 2017, Pages 82-94]
Nikseresht, Saba Coordinated Landing Control of Multiple Vehicles using Rough Neural Network and Sliding Mode Methods [Volume 26, Issue 2, 2025, Pages 93-110]
Nourazar, Mahsa Multiple moving cracks in an orthotropic strip sandwiched between two piezoelectric layers [Volume 16, Issue 1, 2015, Pages 97-113]
Nouri-Khajavi, M. Model Predictive Control System Design using ARMAX Identification Method for Car-following Behavior [Volume 14, Issue 1, 2013, Pages 48-71]
O
Ojolo, Sunday Nonlinear Analysis of Integrated Kinetics and Heat Transfer Models of Slow Pyrolysis of Biomass Particles using Differential Transformation Method [Volume 19, Issue 2, 2018, Pages 5-45]
Oloomi, S. A. A. Effects of Temperature on Radiative Properties of Nanoscale Multilayer with Coherent Formulation in Visible Wavelengths [Volume 11, Issue 2, 2010, Pages 5-14]
Omidpanah, Mohammad Analysis of an Efficient Circular Solar Air Heater [Volume 25, Issue 2, 2024, Pages 78-92]
Ommi, F Uncertainty Analysis of Spray Injection Process in a Model Scale Liquid Fuel Micro-Motor [Volume 21, Issue 2, 2020]
Ommian, M. Thermo-economic performance of an indirect hybrid system of solid oxide fuel cell and micro gas turbine [Volume 22, Issue 1, 2021, Pages 5-26]
Osheku, Charles Nonlinear Analysis of Integrated Kinetics and Heat Transfer Models of Slow Pyrolysis of Biomass Particles using Differential Transformation Method [Volume 19, Issue 2, 2018, Pages 5-45]
Ozgoli, Hassan Ali Thermo-economic analysis of absorption chiller integrated with a GE-F5 gas turbine for power enhancement (Zanbagh power plant, studied case) [Volume 19, Issue 1, 2018, Pages 20-33]
P
Pal, Pradip KumarParametric optimization of cylindrical grinding process through hybrid Taguchi method and RSM approach using genetic algorithm [Volume 19, Issue 1, 2018, Pages 34-62]
Palangsavar, Nabiollah Stability investigation of hydraulic interconnected suspension system of a vehicle with a quaternion neural network controller [Volume 20, Issue 1, 2019, Pages 129-151]
Pal Singh, Ajit A Comparative Study on the use of Butyl Esters of Soyabean and Sunflower Oils as Biodiesel Fuel for Compression Ignition Engine [Volume 12, Issue 1, 2011, Pages 68-85]
Parhizkar, H. Numerical Modeling and Analysis of the Performance of a Stepped Solar Still using Multi-phase Method [Volume 23, Issue 1, 2022, Pages 87-100]
Payan, Samira Effect of Insulated Up and Down Lid Motion on the Heat Transfer of a Lid-Driven Cavity with an attached fin [Volume 19, Issue 1, 2018, Pages 99-126]
Payeganeh, Gholamhasan Nonlinear Coupled Thermoelasticity of Cylindrical Shells Resting on Elastic Foundation [Volume 25, Issue 2, 2024, Pages 6-25]
Pirkandi, J. Simulating Cooling Injection Effect of Trailing Edge of Gas Turbine Blade on Surface Mach Number Distribution of Blade [Volume 15, Issue 1, 2014, Pages 48-67]
Pirkandi, J. Numerical Simulation of Beta Type Stirling Engine Considering Heat and Power Losses [Volume 15, Issue 2, 2014, Pages 5-27]
Pirkandi, J. Thermo-economic performance of an indirect hybrid system of solid oxide fuel cell and micro gas turbine [Volume 22, Issue 1, 2021, Pages 5-26]
Pirkandi, J. A Hybrid Method for Prediction of Lean Blow Out in a Turbine Engine Combustion Chamber [Volume 22, Issue 2, 2021, Pages 54-70]
Pirkandi, J. Numerical Modeling and Analysis of the Performance of a Stepped Solar Still using Multi-phase Method [Volume 23, Issue 1, 2022, Pages 87-100]
Pirkandi, Jamasb Analysing Jet Trainer Engine Performance During Steady-State and Transient Process Under Varying Humidity Conditions [(Articles in Press)]
Poultangari, R. Thermoelastic Analysis in Thick FGM Cylinders with Extended Profile [Volume 12, Issue 2, 2011, Pages 73-91]
Pourbagian, Mahdi Investigating the Impact of Geometric Parameters on Radial Fan Performance [Volume 25, Issue 1, 2024, Pages 6-20]
Poureshghi, Masoumeh Enrichment of Approximated Flexible Beam Model for Constrained Control of Vibration Suppression [Volume 25, Issue 2, 2024, Pages 114-141]
Pourrajabian, Abolfazl Wind farm layout optimization using a Reynolds‐averaged Navier–Stokes model and a genetic algorithm [Volume 21, Issue 2, 2020]
Q
Qhafuri, Amir Experimental Study on the Effect of Magnetic Field on Critical Heat Flux of Ferrofluid Flow Boiling in a Vertical Tube [Volume 19, Issue 2, 2018, Pages 116-126]
R
Rafatnia, Sadra Time Delay Estimation and PID Controller Design using Smith Predictor for Lever Arm Platform [Volume 24, Issue 2, 2023, Pages 142-156]
Rafatnia, Sadra Enrichment of Approximated Flexible Beam Model for Constrained Control of Vibration Suppression [Volume 25, Issue 2, 2024, Pages 114-141]
Rafiee, Masoud Effects of Bronze Element Surface on Bubble Departure Size in Pool Boiling and its Prediction through ANN and GA Approaches [Volume 24, Issue 1, 2023, Pages 15-39]
Rahgozar, Saeed Wind farm layout optimization using a Reynolds‐averaged Navier–Stokes model and a genetic algorithm [Volume 21, Issue 2, 2020]
Rahi, Abbas Multi-objective Optimization of Two-Layer Microbeam used for Sensing of Viruses by Genetic Algorithm [Volume 24, Issue 1, 2023, Pages 70-84]
Rahi, Abbas The Optimum Design of an Anti-vibration Boring Bar by Improving Dynamic Characteristics [Volume 26, Issue 1, 2025, Pages 31-43]
Rahmanei, Hamid Vibration analysis of a rectangular composite plate in contact with fluid [Volume 17, Issue 2, 2016, Pages 67-83]
Rahmani, O. Multiple Moving Cracks in a Nonhomogeneous Orthotropic Strip [Volume 14, Issue 1, 2013, Pages 17-32]
Rahmani Hanzaki, A. Stability analysis of an axially moving thin wall conical shells made of shape memory alloy [Volume 23, Issue 2, 2022, Pages 105-128]
Rahmanpour, Morteza Wind farm layout optimization using a Reynolds‐averaged Navier–Stokes model and a genetic algorithm [Volume 21, Issue 2, 2020]
Raissi, S. Effect of Selecting the Suitable Design on Production Costs of Pressure Vessels [Volume 23, Issue 2, 2022, Pages 48-62]
Rajabi, M. Residual Stress Assessment in Spiral Steel Pipe with the Grade of API-X65 after Submerged Arc-welding [Volume 23, Issue 1, 2022, Pages 5-29]
Ranamaye Lashkami, Fahime Experimental Design by using Taguchi Method for Sensitivity Analysis of CuO/Deionized Water Nanofluid Properties [Volume 24, Issue 2, 2023, Pages 5-41]
Rasaee, S. The Johnson-cook Constitutive Equation for Compression Behavior of the New Piston Aluminum Alloys at High Temperatures [Volume 23, Issue 1, 2022, Pages 30-45]
Rasam, Amin Subgrid-scale Flux Modeling of a Passive Scalar in Turbulent Channel Flow using Artificial Neural Network [Volume 24, Issue 2, 2023, Pages 157-172]
Rasekh, Mohamad Numerical Study of the tongue geometry effects on the cavitation and performance of a centrifugal pump in off-design conditions [Volume 21, Issue 1, 2020, Pages 87-109]
Rashidi, Farzan Optimizing Design of Stand-alone Hybrid Solar Micro-CHP Systems Using LUS Based Particle Swarm Optimization Algorithm [Volume 21, Issue 1, 2020, Pages 5-20]
Rashidi, Farzan Robust sliding mode control of uncertain nonlinear ship autopilot system [Volume 21, Issue 2, 2020]
Rashidi, Halimeh Optimizing Design of Stand-alone Hybrid Solar Micro-CHP Systems Using LUS Based Particle Swarm Optimization Algorithm [Volume 21, Issue 1, 2020, Pages 5-20]
Rashidi, M. M. Comparison of Performances for Air-Standard Atkinson and Dual Combustion Cycles with Heat Transfer Considerations [Volume 13, Issue 2, 2012, Pages 5-19]
Razavi, S. E. An Enhanced Flux Treatment in Solving Incompressible Flow in a Forward-Facing Step [Volume 11, Issue 1, 2010, Pages 34-44]
Reyhani, Anahita Implementation of Local Chemiluminescence Method on a Premixed Laminar Propane/Air Flame [Volume 25, Issue 2, 2024, Pages 66-77]
Rezaei, Masoud Mechanical Buckling of FG Saturated Porous Rectangular Plate under Temperature Field [Volume 17, Issue 1, 2016, Pages 61-78]
Rezaei, Masoud Mechanical Buckling of FG Saturated Porous Rectangular Plate with Piezoelectric Actuators [Volume 17, Issue 2, 2016, Pages 46-66]
Rezaeian, J. Prediction of Surface Roughness by Hybrid Artificial Neural Network and Evolutionary Algorithms in End Milling [Volume 15, Issue 1, 2014, Pages 39-47]
Rezaei Niya, S.M Effect of Volute and Rotor Widths on Squirrel Cage Fan Performance and Velocity Profiles [Volume 9, Issue 2, 2020, Pages 80-97]
Rezvani, Farhad A Novel Switching Control Scheme for Rehabilitation of the Lower Limbs of a Human Body [Volume 25, Issue 1, 2024, Pages 65-88]
Roshanian, J Nonlinear Non-minimum Phase Flight Vehicle Control Using Dynamic Sliding Manifold [Volume 9, Issue 2, 2020, Pages 42-58]
Rudrapati, Ramesh Parametric optimization of cylindrical grinding process through hybrid Taguchi method and RSM approach using genetic algorithm [Volume 19, Issue 1, 2018, Pages 34-62]
S
Sabetghadam-Isfahani, Armin Friction-Stir-Processing Effect on Fracture Toughness of Oil Pipelines in ST 37 Group Before/After Nano ZrO2-Coating [Volume 17, Issue 1, 2016, Pages 79-95]
Saboonchi, A. Effects of Temperature on Radiative Properties of Nanoscale Multilayer with Coherent Formulation in Visible Wavelengths [Volume 11, Issue 2, 2010, Pages 5-14]
Sadati, H. Modeling and Intelligent Control System Design for Overtaking Maneuver in Autonomous Vehicles [Volume 13, Issue 1, 2012, Pages 68-87]
Sadedel, Majid Design and Development of an Emergency BVM-based Ventilator with 2D Look-up Table Control Algorithm [Volume 24, Issue 2, 2023, Pages 42-59]
Sadighi, M. Analytical Modeling of Axial Collapse of Circular Hybrid Tubes [Volume 12, Issue 2, 2011, Pages 44-53]
Sadighi, M. Multi-objective Optimization of Crashworthiness of Cylindrical Tubes as Energy Absorbers [Volume 12, Issue 1, 2011, Pages 5-18]
Saedghi, Mohammad Hosein Numerical Simulation of the Saline Water Electrolysis Process using Electromagnetic Waves [Volume 24, Issue 2, 2023, Pages 104-141]
Saeedi, Mohammad Hasan Comparative Evaluation of Combustion Mechanisms (GRI 3.0 and DRM19) in MILD Combustor [Volume 26, Issue 1, 2025, Pages 66-83]
Safarpour, Hamed Vibration analysis of a double layer microshell utilizing a modified couple stress theory [Volume 21, Issue 1, 2020, Pages 21-44]
Safarpour, Pedram Buckling and static analyses of functionally graded saturated porous thick beam resting on elastic foundation based on higher order beam theory [Volume 20, Issue 1, 2019, Pages 94-112]
Safarpour, Pedram The effect of support parameters on the force transmissibility of a flexible rotor [Volume 20, Issue 2, 2019, Pages 28-41]
Safavinejad, A. A New Modified Harmony Search Optimization Algorithm for Evaluating Airfoil Shape Parameterization Methods and Aerodynamic Optimization [Volume 23, Issue 2, 2022, Pages 80-104]
Saffar, S. Enhancement of sound absorber by multi-area Helmholtz resonators array based on Fibonacci sequence [Volume 22, Issue 1, 2021, Pages 54-73]
Saffar, S. Investigation and Comparison of Three Popular Ultrasonic Generators (PZT, PVDFEMFi) for Employing in Acoustic Scaling [Volume 22, Issue 2, 2021, Pages 21-37]
Safikhani, H. Numerical Study of Flow Field in New Design Cyclones with Different Vortex Finder Shapes [Volume 23, Issue 2, 2022, Pages 63-79]
Saidi, Mohammad Hassan A Simulation Study on Ionic Current in Cylindrical Hydrophobic Nanopores [Volume 25, Issue 1, 2024, Pages 130-142]
Sajjadi, Vahid Numerical Study of the tongue geometry effects on the cavitation and performance of a centrifugal pump in off-design conditions [Volume 21, Issue 1, 2020, Pages 87-109]
Saleh, M. S. Application of Wavelet Transform as a Signal Processing Method for Defect Detection using Lamb Waves: Experimental Verification [Volume 13, Issue 2, 2012, Pages 81-95]
Salehi, M. Mechanical Behaviour of Femoral Diaphyseal Cortical Bone using the Computed Tomography Data: A Numerical Investigation [Volume 22, Issue 2, 2021, Pages 5-20]
Salehi, Sina Design and Development of an Emergency BVM-based Ventilator with 2D Look-up Table Control Algorithm [Volume 24, Issue 2, 2023, Pages 42-59]
Salehinia, S. Model Predictive Control System Design using ARMAX Identification Method for Car-following Behavior [Volume 14, Issue 1, 2013, Pages 48-71]
Salehnia, S. Design, Fabrication and Intelligent Control of the Gripper Based on SMA Actuators [Volume 15, Issue 2, 2014, Pages 59-77]
Saviz, MohammadReza Elasticity Solution Approach for Functionally Graded Spherical Shell with Piezoelectric Properties [Volume 18, Issue 1, 2017, Pages 103-123]
Sayyaadi, Hassan Integrating Adaptive Sliding Mode Control and Deep Learning for Autonomous Vision-driven Fruit Sorting robot [Volume 26, Issue 2, 2025, Pages 6-34]
Sedaghat, S. Effects of Temperature on Radiative Properties of Nanoscale Multilayer with Coherent Formulation in Visible Wavelengths [Volume 11, Issue 2, 2010, Pages 5-14]
Sedighi, M. Investigation of welding parameters effects on residual stresses of resistance spot welding of AZ31 alloy [Volume 22, Issue 1, 2021, Pages 27-41]
Sedighi, Mohammd reza Three-Dimensional Elasticity Solution of Single Layer Piezoelectric Panel [Volume 9, Issue 2, 2020, Pages 26-40]
Selk Ghafari, A Dynamic and Uncertainty Analysis of an Exoskeletal Robot to Assist Paraplegics Motion [Volume 9, Issue 2, 2020, Pages 6-25]
Seyedi, S. E.Multi-objective Optimization of Crashworthiness of Cylindrical Tubes as Energy Absorbers [Volume 12, Issue 1, 2011, Pages 5-18]
Seyed Roknizadeh, Seyed AliReza Free and forced vibration behavior of cylinders made of two dimensional functionally graded materials using meshless method [Volume 21, Issue 2, 2020]
Shabgard, Mohammad Reza Comparative study of ultrasonic vibrations assisted EDM and magnetic field assisted EDM processes [Volume 21, Issue 1, 2020, Pages 45-64]
Shabgard, Mohammad Reza Experimental Investigation of Injection Pattern Effect on Tensile Strength of PLA Material in FDM Processes [Volume 26, Issue 2, 2025, Pages 51-71]
Shadkami, M. Vibrational Analysis of Cables Using the Non Standard Finite Difference Method [Volume 22, Issue 1, 2021, Pages 74-89]
Shafiee, M. New Correlations for the Prediction of Terminal Velocity and Drag Coefficient of a Bubble Rising [Volume 22, Issue 2, 2021, Pages 71-87]
Shafiei Souderjani, Ali A Simulation Study on Ionic Current in Cylindrical Hydrophobic Nanopores [Volume 25, Issue 1, 2024, Pages 130-142]
Shahabinejad, Esmaeil Vibration analysis of a double layer microshell utilizing a modified couple stress theory [Volume 21, Issue 1, 2020, Pages 21-44]
Shahgholi, M. Stability analysis of an axially moving thin wall conical shells made of shape memory alloy [Volume 23, Issue 2, 2022, Pages 105-128]
Shahgholi, Majid Nonlinear Coupled Thermoelasticity of Cylindrical Shells Resting on Elastic Foundation [Volume 25, Issue 2, 2024, Pages 6-25]
Shahi, T. Fuel Consumption Minimization in Greenhouses by Employing an Innovative System Taking Advantage of Solar and Geothermal Energies [Volume 15, Issue 2, 2014, Pages 91-115]
Shahidian, Azadeh Numerical Simulation of Blood Flow Mixed with Magnetic Nanoparticles under the Influence of AC and DC Magnetic Field [Volume 15, Issue 1, 2014, Pages 68-81]
Shahriari, Behrooz Elastoplastic Analysis of Rotating Disk of Variable Thickness Made of Functionally Graded Materials [Volume 24, Issue 1, 2023, Pages 99-118]
Shahsiah, R. A General Form Solution for Elastic Buckling of Thin Cylinders Made of FGM under Axial Loading [Volume 12, Issue 2, 2011, Pages 6-26]
Shahsiah, R. Thermal Buckling of Functionally Graded Beams [Volume 10, Issue 2, 2009, Pages 65-81]
Shakeri, M Three-Dimensional Elasticity Solution of Single Layer Piezoelectric Panel [Volume 9, Issue 2, 2020, Pages 26-40]
Shakeri, M. Analytical Modeling of Axial Collapse of Circular Hybrid Tubes [Volume 12, Issue 2, 2011, Pages 44-53]
Shakeri, M. Multi-objective Optimization of Crashworthiness of Cylindrical Tubes as Energy Absorbers [Volume 12, Issue 1, 2011, Pages 5-18]
Shameli, Moharram Designing and Calibrating of a Millinewton Measurement System for Thermal-vacuum Conditions [Volume 25, Issue 1, 2024, Pages 89-111]
Sharifi, Mohammad Hossein Friction-Stir-Processing Effect on Fracture Toughness of Oil Pipelines in ST 37 Group Before/After Nano ZrO2-Coating [Volume 17, Issue 1, 2016, Pages 79-95]
Shariyat, M. An Analytical Shear Factor for FGM Circular Plates with Non-uniform Elastic Foundations and Normal and Shear Tractions [Volume 14, Issue 2, 2013, Pages 50-72]
Shariyat, M. A Differential Transform Approach for Modal Analysis of Variable Thickness Two-directional FGM Circular Plates on Elastic Foundations [Volume 11, Issue 2, 2010, Pages 15-38]
Shariyat, M. Non-Equilibruim Molecular Dynamics Simulation of Poiseuille Flow in a Nanochannel [Volume 11, Issue 1, 2010, Pages 21-33]
Shariyat, M. Coupled Thermoelasticity Impact Response Analysis of Composite Plates with SMA Wires in Thermal Environments [Volume 16, Issue 1, 2015, Pages 73-96]
Sharyat, Mohammad An Exact Elastodynamic Solution for Func-tionally Graded Thick-Walled Cylinders Subjected to Dynamic Pressures [Volume 10, Issue 1, 2009, Pages 56-75]
Sheidaei, Taraneh Numerical Analysis of Composite Beams with Piezoelectric Actuators [Volume 26, Issue 2, 2025, Pages 135-148]
Sheikhzadeh, Gh. A. Effect of Magnetic Field on Heat Transfer of Nanofluid with Variable Properties on the Inclined Enclosure [Volume 15, Issue 1, 2014, Pages 28-38]
Shirazi, Mehran Subgrid-scale Flux Modeling of a Passive Scalar in Turbulent Channel Flow using Artificial Neural Network [Volume 24, Issue 2, 2023, Pages 157-172]
Shirnezhad, Mohsen Fracture Behavior of Bonded Dissimilar Piezoelectric Rectangular Planes with Multiple Interfacial Cracks under Anti-plane Mechanical and In-plane Electric Impact Loads [Volume 26, Issue 1, 2025, Pages 44-65]
Shokouhfar, Milad Mechanical and Thermal Stresses In a Linear Plastic FGM Hollow Cylinder Due to Axisymmetric Loads [Volume 16, Issue 2, 2015, Pages 39-65]
Sobamowo, G. M.Finite Difference Analysis of Transient Flow Analysis of Casson Magneto-nanofluid over a Vertical Porous Conical Plate under the Influence of Thermal Radiation [Volume 23, Issue 1, 2022, Pages 46-67]
Sobamowo, Gbeminiyi MusibauNonlinear Analysis of Flow-induced Vibration in Fluid-conveying Structures using Differential Transformation Method with Cosine-Aftertreatment Technique [Volume 18, Issue 1, 2017, Pages 5-42]
Sobamowo, Gbeminiyi MusibauTransient Three-Dimensional Thermal Analysis of a Slab with internal heat generation and heated by a Point Moving Heat Source [Volume 18, Issue 1, 2017, Pages 43-64]
Sobamowo, Gbeminiyi Nonlinear Analysis of Integrated Kinetics and Heat Transfer Models of Slow Pyrolysis of Biomass Particles using Differential Transformation Method [Volume 19, Issue 2, 2018, Pages 5-45]
Sobamowo, Gbeminiyi MusibauInsight into the Boundary Layer Flows of Free Convection and Heat Transfer of Nanofluids over a Vertical Plate using Multi-Step Differential Transformation Method [Volume 20, Issue 1, 2019, Pages 5-45]
Sobamowo, Gbeminiyi MusibauAnalysis of squeezing flow of viscous fluid under the influence of slip and magnetic field: comparative studies of different approximate analytical methods [Volume 20, Issue 2, 2019, Pages 5-27]
Soheili, S. Tuned Mass Dampers for Earthquake Vibrations of High-rise Buildings using Bee Colony Optimization Technique [Volume 13, Issue 1, 2012, Pages 36-51]
Soleyman, A. One Dimensional Internal Ballistics Simulation of Solid Rocket Motor [Volume 14, Issue 1, 2013, Pages 5-16]
Soorgee, M. H. Application of Wavelet Transform as a Signal Processing Method for Defect Detection using Lamb Waves: Experimental Verification [Volume 13, Issue 2, 2012, Pages 81-95]
Sourki, Reza Multiple cracks in an elastic half-plane subjected to thermo-mechanical loading [Volume 17, Issue 2, 2016, Pages 19-45]
Sourki, Reza Analysis of Multiple Yoffe-type Moving Cracks in an Orthotropic Half-Plane under Mixed Mode Loading Condition [Volume 18, Issue 2, 2017, Pages 39-62]
Sulieman, Abdurhaman Design and Modification of One Arm Driven Manual Hemiplegic Wheelchair [Volume 19, Issue 1, 2018, Pages 63-78]
T
Tabatabai Ghomsheh, F. Ionic Channel Blockage Effect on the Electromechanical Model of Human Gastric Wall Smooth Muscle Cells [Volume 23, Issue 2, 2022, Pages 33-47]
Taghadosi, H. Ionic Channel Blockage Effect on the Electromechanical Model of Human Gastric Wall Smooth Muscle Cells [Volume 23, Issue 2, 2022, Pages 33-47]
Taghi Zadeh, Mostafa A Modeling Framework for Rigid Legs Passive Dynamic Biped Walkers in MSC ADAMS [Volume 26, Issue 2, 2025, Pages 72-92]
Taghvaeipour, A. A shell superelement for mechanical analysis of cylindrical structures [Volume 22, Issue 1, 2021, Pages 90-107]
Taghvaeipour, Afshin On the Corotational Beam Element Formulation in Large Deformation Analysis [Volume 19, Issue 2, 2018, Pages 94-115]
Tahani, Masoud Investigating the Influence of Piezoelectric Excitation on the Veering Phenomenon Associated with Electrostatically Coupled Micro-beams [Volume 24, Issue 2, 2023, Pages 60-80]
Taheri, A. Prediction of Surface Roughness by Hybrid Artificial Neural Network and Evolutionary Algorithms in End Milling [Volume 15, Issue 1, 2014, Pages 39-47]
Talebi, M. Experimental investigation of Convective Heat Transfer of Carbon Nanotubes / Water Flow in a helical Triple tube Heat Exchanger [Volume 22, Issue 2, 2021, Pages 106-115]
Talley, Mohammad Free vibration analysis of functionally graded rectangular plates via differential quadrature method [Volume 20, Issue 1, 2019, Pages 46-70]
Tamiru, Bethelhem Design and Modification of One Arm Driven Manual Hemiplegic Wheelchair [Volume 19, Issue 1, 2018, Pages 63-78]
Tarahhomi, M. H.Thermo-elastic analysis of a functionally graded thick sphere by differential quadrature method [Volume 12, Issue 2, 2011, Pages 27-43]
Tavakolian, M. Nonlinear Vibration of Functionally Graded Cylindrical Shells under Radial Harmonic Load [Volume 13, Issue 2, 2012, Pages 20-34]
Teymoori Faal, Reza Fracture Behavior of Bonded Dissimilar Piezoelectric Rectangular Planes with Multiple Interfacial Cracks under Anti-plane Mechanical and In-plane Electric Impact Loads [Volume 26, Issue 1, 2025, Pages 44-65]
Torabi Rad, M. Hybrid differential transform-finite difference solution of 2D transient nonlinear annular fin equation [Volume 11, Issue 1, 2010, Pages 5-20]
V
Vahidi, H. Stability analysis of an axially moving thin wall conical shells made of shape memory alloy [Volume 23, Issue 2, 2022, Pages 105-128]
Varmazyar, Mostafa Introduced a Modified Set of Boundary Condition of Lattice Boltzmann Method Based on Bennett extension in Presence of Buoyancy Term Considering Variable Diffusion Coefficients [Volume 18, Issue 2, 2017, Pages 5-22]
Vatankhahan, F. Mechanical Behaviour of Femoral Diaphyseal Cortical Bone using the Computed Tomography Data: A Numerical Investigation [Volume 22, Issue 2, 2021, Pages 5-20]
Vossoughi, G.R Dynamic and Uncertainty Analysis of an Exoskeletal Robot to Assist Paraplegics Motion [Volume 9, Issue 2, 2020, Pages 6-25]
Vossoughi, G.R. Variable Structure Behavioural Controller for Multi-agent Systems [Volume 10, Issue 2, 2009, Pages 49-63]
W
Waheed, Akindoye OTransient Three-Dimensional Thermal Analysis of a Slab with internal heat generation and heated by a Point Moving Heat Source [Volume 18, Issue 1, 2017, Pages 43-64]
Y
Yadegari, M. Capturing of Shock Wave of Supersonic Flow over the Bump Channel with TVD, ACM and Jameson Methods [Volume 22, Issue 1, 2021, Pages 108-126]
Yadegari, M. Investigation of the Effects of Temperature, Mass Flow Rate of the Injected Fuel, Pore Diameter, Porosity and Ambient Pressure on the Amount of Pollutants in the Combustion Chamber [Volume 23, Issue 1, 2022, Pages 122-146]
Yaghoubi, Reza Analysis of Multiple Yoffe-type Moving Cracks in an Orthotropic Half-Plane under Mixed Mode Loading Condition [Volume 18, Issue 2, 2017, Pages 39-62]
Yaghoubi, S. Evaluation and Simulation of Performance, Environmental and Economic Aspects of 1MW Photovoltaic Powerplant and Comparison with an Operational Powerplant [Volume 23, Issue 1, 2022, Pages 101-121]
Yarinia, Negin Enrichment of Approximated Flexible Beam Model for Constrained Control of Vibration Suppression [Volume 25, Issue 2, 2024, Pages 114-141]
Yarmohammad Tooski, Mehdi An experimental study on effects of opening on buckling of FML plates reinforced with basalt [Volume 20, Issue 2, 2019, Pages 112-124]
Yassi, Y. Experimental Study of a High Speed Micro Waterwheel [Volume 14, Issue 1, 2013, Pages 33-47]
Yazdanpanah, M J Fuzzy Variable-Length Sliding Window Blockwise Least Square Algorithm with Application to Vehicle Heading Determination [Volume 9, Issue 2, 2020, Pages 59-79]
Yimam, Abdurhaman Design and Modification of One Arm Driven Manual Hemiplegic Wheelchair [Volume 19, Issue 1, 2018, Pages 63-78]
Yinusa, Ahmed AmaoInsight into the Boundary Layer Flows of Free Convection and Heat Transfer of Nanofluids over a Vertical Plate using Multi-Step Differential Transformation Method [Volume 20, Issue 1, 2019, Pages 5-45]
Yinusa,, Ahmed AmooAnalysis of squeezing flow of viscous fluid under the influence of slip and magnetic field: comparative studies of different approximate analytical methods [Volume 20, Issue 2, 2019, Pages 5-27]
Yoosefi Koma, M. S. Application of Wavelet Transform as a Signal Processing Method for Defect Detection using Lamb Waves: Experimental Verification [Volume 13, Issue 2, 2012, Pages 81-95]
Yousefi, Mehrdad Detection and Recognition of Multi-language Traffic Sign Context by Intelligent Driver Assistance Systems [Volume 20, Issue 2, 2019, Pages 125-136]
Youssef, Ismail Influence of Biodiesel from Egyptian Used Cooking Oils on Performance and Emissions of Diesel Engine [Volume 18, Issue 1, 2017, Pages 65-80]
Z
Zakeri, Manizhe Low-dimensional Friction Modelling with Considering Random Asperity Distributions [Volume 24, Issue 1, 2023, Pages 119-140]
Zamani, Mohamad-Amin Comparative Evaluation of Combustion Mechanisms (GRI 3.0 and DRM19) in MILD Combustor [Volume 26, Issue 1, 2025, Pages 66-83]
Zamani Nejad, Mohammad Perturbation technique in thermoelastic analysis of thick cylinders under various boundary conditions using shear deformation and temperature theories [(Articles in Press)]
Zamzamian, Seyed Amir Hossein Experimental Design by using Taguchi Method for Sensitivity Analysis of CuO/Deionized Water Nanofluid Properties [Volume 24, Issue 2, 2023, Pages 5-41]
Zanganeh, H. The Lock-in Phenomenon in VIV using A Modified Wake Oscillator Model for both High and Low Mass-Damping Ratio [Volume 10, Issue 2, 2009, Pages 5-28]
Zangeneh, Sh. The Johnson-cook Constitutive Equation for Compression Behavior of the New Piston Aluminum Alloys at High Temperatures [Volume 23, Issue 1, 2022, Pages 30-45]
Zarefar, B. Design, Fabrication and Intelligent Control of the Gripper Based on SMA Actuators [Volume 15, Issue 2, 2014, Pages 59-77]
Zohoor, H. Modeling and Wrench Feasible Workspace Analysis of a Cable Suspended Robot for Heavy Loads Handling [Volume 10, Issue 2, 2009, Pages 29-48]
Zolanvari, Seyed Mohammad Hassan Damage Detection using Machine Learning: A Comparative Analysis for Dimensionality Reduction and Classification Techniques [Volume 26, Issue 1, 2025, Pages 84-113]
